Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹26.2 L
EMD Value
₹52,306
Closing Date
8 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Electrical work for DG Set area, Compressor House and AC Plant
7491
HAL-ADL/9995/DG-SET/23-24/79
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹52,306
8 Jun 2024
18 May 2024
18 May 2024
8 Jun 2024
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX
NAME OF THE WORK: "Electrical work for DG Set area, Compressor House and AC Plant"
Estimated Cost (in Rs.) 2,615,300.00
S# Intending bidders must meet the following eligibility criterion: Remarks to be filled by Bidder
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address of Correspondence
5 Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :
6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.
7 Self attested copy of PAN/GIR No. Registration certificate issued by income tax authority.
8 Sel attested Copy of GST Registration Certificate.
9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2020-21,2021-22 & 2022-23 784,590.00
10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.
11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender.(in Rs.) 1,046,120.00
12* EMD amount (in Rs.) 52,306.00
13* Self attested Copy of PF Code Certificate(if applicable).
14* Self attested Copy of ESI Number certificate (if applicable).
15* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-
i Three similar completed each work costing not less than 40% of estimated amount. OR 1,046,120.00 PO no.: Value : Completion Date: Customer:
1,046,120.00 PO no.: Value : Completion Date: Customer:
1,046,120.00 PO no.: Value : Completion Date: Customer:
ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 1,307,650.00 PO no.: Value : Completion Date: Customer:
1,307,650.00 PO no.: Value : Completion Date: Customer:
iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 2,092,240.00 PO no.: Value : Completion Date: Customer:
16 DECLARATION I ACCEPTED/NOT ACCEPTED
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
17 DECLARATION II ACCEPTED/NOT ACCEPTED
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.
19 DECLARATION III COMPLIED/NOT CPMPLIED
I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.
Name of Bidder:
* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
Name of Work: "Electrical work for DG Set area, Compressor House and AC Plant"
S# DESCRIPTION OF WORK UNIT Total QTY RATE AMOUNT
Light/Fan/Exhaust Fan Point wiring
1 Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder etc. required for point wiring work. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement. Nos 50 ₹ 1,309.82 ₹ 65,491.07
2 Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work. Nos 30 ₹ 766.07 ₹ 22,982.14
3 Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire. No. 10 ₹ 200.89 ₹ 2,008.93
Sub-main/Circuit Wiring
4 Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed heavy duty class PVC conduit as required
i 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) Mtrs 200 ₹ 245.54 ₹ 49,107.14
ii 2 x 4 sqmm (for phase & neutral) + 1 x 4 sqmm (for earth) Mtrs 200 ₹ 298.21 ₹ 59,642.86
5 Supply & making One independent domestic power point with 3 pin, 5/6 Amps modular socket controlled by 5/6 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. Nos 15 ₹ 492.86 ₹ 7,392.86
6 Supply & making One independent domestic power point with 5 pin, 15/16 Amps modular socket controlled by 15/16 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. Nos 15 ₹ 607.14 ₹ 9,107.14
7 Supply & making One independent Industrial power point with one 20 Amps, metal clad plug socket in M.S. Box controlled with 20 Amps. S.P., M.C.B, with 4.0 sqmm P.V.C. insulated, copper conductor multi stranded wire of 1100/660 Voltage grade & fire retardant for phase & neutral and 1.5 sqmm wire for earth in PVC pipe (Heavy duty) of Cap make including all accessories required for making power point. The point must be complete in all respect using complete metal clad unit.The pipe shall be laid as per site requirement i.e. it may be concealed in floor/wall or flush to the wall. All material required for the work shall be supplied by the contractor. Wall cutting should be finished as original. Nos 15 ₹ 1,447.32 ₹ 21,709.82
8 Supplying and fixing of 25 mm of Heavy class PVC conduit for dressing of LAN/WAN/telephone cable along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/CAP/Anchor/MODI) Mtrs 50 ₹ 129.46 ₹ 6,473.21
9 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 4 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB –12 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. Nos 4 ₹ 7,318.75 ₹ 29,275.00
10 Supply and Fixing 125 A, TPN SFU complete with box including , driling holes, connection, cable termination flush to the wall or on surface etc as per direction of EIC. Nos 4 ₹ 12,683.93 ₹ 50,735.71
11 Supply & Laying of XLPE insulated, PVC sheathed Armored, 1.1 KV grade, Aluminium conductor power cable, conforming to IS 7098 (Part-I). Concealed cabling can be done to cut/chase the wall/floor, laying cable tray (provided by HAL) and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. The work also includes connection work which includes all the required materials for their jointing work. Cable to be laid as required at site and as per the direction of Engineer-In-Charge. Mtrs 200 ₹ 236.38 ₹ 47,275.39
12 Laying and Fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of Following size on wall surface/trench as required. Size of cable : 3.5C X 95 Sqmm Aluminium armoured conductor (clamped with25x3mm MS Flat Clamp) Please note, if some where cable laid concealed or flush on wall than concealed cabling can be done to cut/chase the wall/floor and after laying of cable wall/floor shall be finished as original Mtrs 200 ₹ 116.07 ₹ 23,214.29
13 Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground in including Concrete surface cutting, excavation, sand cushioning, protective covering and making surface as original. Size of cable : 3.5C X 400 Sqmm Aluminium armoured conductor Note: Please note cable is to be laid underground by cutting concrete surface, digging soft/hard soil 100 cm deep. Also cable to be laid in hume pipe for drain crossing whereever required. After making trench cable should be laid and covered with sand after that bricks shall be placed in width wise (Approximately nine bricks per mtr length) for protection of cable. Please note, if some where cable laid concealed or flush on wall than concealed cabling can be done to cut/chase the wall/floor and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. After laying of cable extra soil to be removed and land to be made leveled as original. Cable dressing, tagging and tie costing to be covered. Work is to be done as per the direction of Engineer- In-Charge. Please note qty. can vary as per site requirement. Cable to be laid as required at site and as per the direction of Engineer-In-Charge. Mtrs 400 ₹ 423.21 ₹ 169,285.71
14 Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including, excavation, sand cushioning, protective covering and making surface as original. Size of cable : 3.5C X 400 Sqmm Aluminium armoured conductor Note: The cable should be laid and covered with sand after that bricks shall be placed in width wise (Approximately nine bricks per mtr length) for protection of cable, also able to be laid in hume pipe for drain crossing whereever required. Please note, if some where cable laid concealed or flush on wall than concealed cabling can be done to cut/chase the wall/floor and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. After laying of cable extra soil to be removed and land to be made leveled as original. Cable dressing, tagging and tie costing to be covered. Work is to be done as per the direction of Engineer- In-Charge. Please note qty. can vary as per site requirement. Cable to be laid as required at site and as per the direction of Engineer-In-Charge. Mtrs 2800 ₹ 317.86 ₹ 890,000.00
Concrete surface cutting and refilling for cable laying
15 Cutting and refilling of Hard cement Concrete surface approx 10-15 cm thick for making cable trunch and laying of power cable. Plese note that the cement concrete suface to be cut first before excavation of soft/hard soil for making cable trunch. After completion of power cable laying and covering of trunch by soil, the cement concrete surface to be mde as original condition by using cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). The surface to be properly finished after the work. The work will be carried out as per site requirement and as per the direction of Engineer-In-Charge. CuM 20 ₹ 8,119.20 ₹ 162,383.93
End/Straight Trough Joint
14 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
i 4C x 25 Sqmm.Al Arm LT cable. Nos 10 ₹ 281.25 ₹ 2,812.50
ii 3.5C x 95 Sqmm.Al Arm LT cable. Nos 4 ₹ 525.00 ₹ 2,100.00
iii 3.5C x 400 Sqmm.Al Arm LT cable. Nos 32 ₹ 1,389.29 ₹ 44,457.14
15 Supplying and making straight through joint with heat shrinkable kit including ferrules and jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
i 3.5C x 400 Sqmm.Al Arm LT cable. Nos 10 ₹ 7,112.50 ₹ 71,125.00
16 Supplying and Installing 300 mm width x 50 mm depth x 1.6 mm thickness G.I. Cable trays with cover, with powder coating G.I. cable trays, Bends, tees etc as required with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including bolts and nuts painting suspenders etc as required. Work Also required proper dressing of cables on the trays with required accessories. Mtrs 50 ₹ 693.75 ₹ 34,687.50
17 Supply of UL listed CPRI Tested maintenance free copper bonded earth rod of 3.048 metre having diameter of 17.2mm with 254 micron copper bonding tested 45 kA peak short-circuit current with clamp made of stainless steel for terminating cable / flat conductor. Earth enhancing mineral (PROCEM) compound ( electrical resistivity 0.018 ohm metre ) 25 kg tested for Leaching & TCLP with NABL accredited lab. The systems is conforming to IS 3043, IS / IEC 62305, IEC 61643-5-54, UL 467, the rod has to be tested to for dimension, marking, tensile strength, salt mist, coating thickness, electrical resistivity test before and after corrosion test etc as per IEC 62561-2.Chamber Inspection Pit made up of PP material can bear 60kN load. Set Consist of following BOM (1) Earth rod of 3 mtr length having the dia of 17.2 mm dia (CAPE Type No. CBR 1710 (Article No - 300 060) (2) CAPE Type: PRO CEM 12.5 (Article: 300 790 ) , 12.5 Kg bag x 2 nos (3) CAPE Type : Universal SS Clamp SSUC 17( Article No 300580 ) (4) CAPE Type: EC 290 (300 852) Nos 6 ₹ 7,080.00 ₹ 42,480.00
18 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. Mtrs 200 ₹ 37.50 ₹ 7,500.00
19 Supplying and laying 25 mm X 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode, including connection/termination with nut, bolt, spring, washer etc as required.(Jointing shall be done by overlapping and with 2 sets og G.I. nut bolt 7 spring washer spaced at 50mm) Mtrs 100 ₹ 128.57 ₹ 12,857.14
Removal of Old Wiring
20 Removal of old Cables, Wires, Light Fitting, fan and DB, MCB DB and all other accessories required to meet the scope of work at site and at nearby location like passage, Gallery etc after tracing of live and non live wires of electrical, Lan and Telephone thereafter dressing of cable as directed by EIC. Mtrs 150 ₹ 144.27 ₹ 21,640.68
Lighting Fixtures
20 Supply & installation of Flood Light, 70 W, 230V,inbuilt driver, IP66, impact and corrosion resistant with accessories required for installation etc. as per direction of EIC. Nos. 40 ₹ 5,945.32 ₹ 237,812.83
22 Supply and fixing LED street light fitting 70 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket, GI Pipe etc as required for installation with impact and corrosion resistant including thermal management in multi optics complete with IP 65/66 Nos. 20 ₹ 5,639.96 ₹ 112,799.19
ACB Removal/Installation
23 Removal of 2000A ACB installed at old DG set location by removing all electrical connections required for removal, transportation of ACB to new location and Installation of same at new location with electrical connection and all accessories required for installation, as per direction of EIC. Job 1 ₹ 10,000.00 ₹ 10,000.00
SUBTOTAL 2,216,357.19
GST @18% on SUB TOTAL 398,944.29
Say Total (Estimated Cost) 2,615,300.00
Percentage Above(+)/Below(-) than Estimated Cost (Bidder to Quote)
Name of Bidder:
Note: 1.PLEASE REFER CHAPTER 6(B) OF TECHNICAL BID FOR APPROVED MAKES OF ITEMS & EQUIPMENTS FOR THIS WORK .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 1.45 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 1.02 MB
ELIGIBILITY_CRITERION.xlsm
TENDER_DOCUMENT • 0.01 MB
PRICE_BID.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .