Maintenance and repair works to the Corporation Engineering division office at chinavadampatti in Ward no.3 North Zone

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering in cement mortor 1:5 mix (one cement,three sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification.

Daddoing the walls with first quality colour glazed tiles of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Flooring finishing with first quality design Ceramic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipehas to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Painting with plastic emulsion paint two coats for old wall along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work) (Including Scrapping)

REWiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.

Supply and Fixing of 4' 18W LED tube light fitting of approved brand including labour charges for fixing in wal and ceiling with necessaey accessories like clips,screw etc., complete