PROVISION OF 400 MEN OTM ACCN FOR RECTS OF TB III, MEG AND CENTRE UNDER GE (N) BANGALORE

Amount

Lumpsum price worked out by the tenderer for BUILDINGS / STRUCTURES as listed in Schedule ‘A’ Part-I

Lumpsum price worked out by the tenderer for SITE CLEARANCE AND DEVELOPMENTS as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for INTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for ROAD / PATH / CULVERTS as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for FENCING AND GATES as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for RAIN WATER HARVESTING as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for COOLING APPLIANCES as listed in Schedule ‘A’ Part-XII

Lumpsum price worked out by the tenderer for SOLAR WATER HEATER as listed in Schedule ‘A’ Part-XIII

Lumpsum price worked out by the tenderer for FIRE FIGHTING SYSTEM as listed in Schedule ‘A’ Part-XIV

Lumpsum price worked out by the tenderer for DEMOLITION OF BUILDINGS as listed in Schedule ‘A’ Part-XV

SCHEDULE 'A' PART XVI (D G SET ) Note: This schedule is not pre-priced by MES and the pre-priced rate left "BLANK" under column 5 signifies this fact only.

Supply, installation, testing and commissioning of 20 KVA/ 16 KW, (The capacity of Generator set shall be net after all due derating factors as per relevant lSI standard), silent Diesel engine Generating Set, 415 volts, 3 phase, 0.8 Power factor, 50 Hz, 4 wire system as per IS 10001/10002 comprising of 20 KVA Generator, developing 25.5 BHP @ 1500 RPM, Liquid Cooled, electric start coupled to alternator as per IS 13364 mounted on a common base frame with standard control panel for automatic starting on main control panel having meters, sound proof canopy as per CPCB norms II with suitable emission control device conforming to NGT norms, integral fuel tank with battery and leads and accessories complete in all respect with CPCB approved acoustic enclosure suitable for ambient condition at Bangalore including required civil works (except Base for Generator) set as per manufacturers instruction and confirming to conditions under IS 10004722/1460 BS 5514/2613/ 5000 ISO 8526/3046... complete all as per Item No.1 of Schedule 'A' Part XVI (DG Set)

SCHEDULE 'A' PART XVII (SOLAR POWER PLANT) Note: This schedule is not pre-priced by MES and the pre-priced rate left "BLANK" under column 5 signifies this fact only.

Design, procure, erect, install, testing and commission of Roof top Solar Power Plant (Off-grid type with inverter and battery backup of 8 hours) of 5 KW capacity including solar hybrid photovoltaic inverter cum charger controller, Solar photovoltaic modules, DC cabling, Module Mounting Structures, Array Combining Boxes, Lightning Protection of SPV modules, Battery bank and other accessories, Central inverter as power conditioning unit all as per detailed specifications, latest MNRE/IREDA guideline and directions, meeting the Domestic Control Requirement (DCR) and consisting of all requisite accessories (BOS-Balance of System) and including the following main equipments:- Poly Crystalline Silicon Solar Photovoltaic minimum of 335Wp to 345Wp, 15 Nos minimum, not less than 5KW capacity having efficiency 18% minimum under standard conditions etc., complete all as described in item No.1 of Sch 'A' Part XVII(Solar Power Plant)

SCHEDULE 'A' PART XVIII (MECHANICAL LAUNDARY) Note: This schedule is not pre-priced by MES and the pre-priced rate left "BLANK" under column 5 signifies this fact only.

Supply, install, testing and commissioning Washer Extractor of 30 kg capacity, approx dimension 1300mm x 1400mm x 1725mm, high spin, VFD energy drive with microprocessor based control, soft mount, front loading, electric heated, Stainless steel cabinet all as per Model AXE30 of Stefab or techno-commercially equivalent of other specified makes including all accessories and making all necessary electric and water connections as per latest engineering practices complete all as specified and as directed.

Supply, install, testing and commissioning Drying Tumbler of 30 kg capacity, approx dimension 1050mm x 1425mm x 1980mm, VFD energy drive with microprocessor based control, Stainless steel cylinder, electric heated, Reversible all as per Model DRE30 of Stefab or techno-commercially equivalent of other specified makes including all accessories and making all necessary electric and water connections as per latest engineering practices complete all as specified and as directed.

Supply, install, testing and commissioning Flat Bed Drying press approx dimension 1600mm x 1500mm x 1260mm, Head size 1500 x 750 mm Pneumatically operated bed with Centrifugal vacuum Auto timed release, electric heated all as per Model FPE150 of Stefab or techno-commercially equivalent of other specified makes including all accessories and making all necessary electric and Steam/water/air connections as per latest engineering practices complete all as specified and as directed.

Supply, install, testing and commissioning Vacuum finishing table approx dimension 1230mm x 890mm x 1850mm, Table top size 1200 x 750 mm with electric steam iron + Teflon Shoe, Centrifugal suction blower all as per Model VF120 of Stefab or techno-commercially equivalent of other specified makes including all accessories and making all necessary electric and Steam/water/air connections as per latest engineering practices complete all as specified and as directed.

Supply, install, testing and commissioning Steam Generator approx dimension 350mm x 600mm x 870 mm. Electric, Portable and Fully Automatic. Steam Capacity 8 Kg / hr all as per Model No. SE8 of Stefab or techno-commercially equivalent of other specified makes etc. complete all as specified and as directed.

Notes for items No.18.00 to 22.00: (i) Washer Extractor, Drying Tumbler, Flat Bed Drying Press, Vacuum finishing table and Steam Generator shall be of same OEM. (ii) The rate quoted shall be deemed to include the cost of all materials and labour required for necessary electrical, water inlet and drain connection pipes from the tapping point provided in the laundry building to the equipments all as directed. (iii) Cable and pipes shall be routed neatly inside the laundry building with obstruction free movement on the floor. (iv) The cost of necessary cable tray and pipes concealed in floor/ on walls shall be deemed to include in the unit rate quoted.

Supply, install, testing and commissioning of LT feeder pillar box, factory made, CPRI approved, indoor type, floor mounting with Channel iron pedestal frame made out of 2.00mm thick CRCA sheet mounted on 40x40x6mm MS angle base frame, compartmental type, dust proof, free standing, suitable for working on 440 volts, 3 Phase, 50Hz, AC supply, vermin proof, front and rear opening hinged doors etc., powder coated with 7 tank process and IP 54 Protection with cable alley, cable entry hole at the bottom, copper earth strip 32x6mm, 3 Phase and neutral copper bus bar of 500 Amps with non adhesive colour coded insulation sleeves mounted on insulators, drilled holes on bus bar strips for tapping including nuts, bolts and washers, PCC works complete with copper strips of suitable size for connecting MCCB complete and comprising of following:-

(a) MCCB 4 Pole, 320amps with ultimate breaking capacity lcu - 25kA at 415 Volts and microprocessor release conforming to IEC 60947 Part-I/ IS-13947-Part-I with breaking capacity lcs=lcu at 415 Volts of 25kA, over load setting 70% to 100%, short circuit setting 6 to 10 times - 1No. (b) MCCB 4 pole adjustable thermal/magnetic setting , 50Amp, with ultimate breaking capacity lcu- 16 KA at 415 Volts - 08 Nos. (c) MCCB 4 pole adjustable thermal/magnetic setting , 32Amp, with ultimate breaking capacity lcu- 16 KA at 415 Volts - 02 Nos. (d) Digital Ammeter 0 to 320 Amps and 3 Nos. CT's, class 1.0, 10VA - 1Set. (e) Digital Voltmeter 0-500 Volts with 7 position and 2A HRC fuses/ MCB's - 1Set. (f) LED Phase indication lamps RYB for incomer and outgoing switches.

SCHEDULE 'A' PART XIX (ELECTRIC CHIMNEY ) Note: This schedule is not pre-priced by MES and the pre-priced rate left "BLANK" under column 5 signifies this fact only.

Supply, install, testing and commissioning of kitchen hood made of SS 304 matt finish 1 mm thick wall mounted type with removable grease stop and fixing brackets, oil drain channel of exhaust hood size 3ft x 20 inch (900mm x 500mm) of length 7ft (2.13m)including drain collector & connecting with exhaust ducting etc., complete all as specified and as directed.

Supply, install, testing and commissioning of kitchen hood made of SS 304 matt finish 1 mm thick wall mounted type with removable grease stop and fixing brackets, oil drain channel of exhaust hood size 3ft x 20 inch (900mm x 500mm) of length 5ft (1.52m) including drain collector & connecting with exhaust ducting complete all as specified and as directed.

Supply, install, testing and commissioning of kitchen hood made of SS 304 matt finish 1 mm thick wall mounted type with removable grease stop and fixing brackets, oil drain channel of exhaust hood size 3ft x 20 inch (900mm x 500mm) of length 3ft (0.91m) including drain collector & connecting with exhaust ducting complete all as specified and as directed.

Supply and install removable grease stop filters size 600mm x 500mm x 50mm complete all as specified and as directed.

Supply and install exhaust ducting of size 570mm x 300mm made of GI sheet 22 SWG including connecting with ceiling mounted exhaust hood up to terrace with MS angle frame 25x25x3mm thick, fixing of brackets with nut bolts, gaskets supporting thread rod, channels etc., including painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply, install, testing and commissioning exhaust blower of capacity 3 HP, 440V, three phase 1440 RPM including starter, connecting with exhaust ducting and suitable electric copper cable connecting with starter complete all as specified and as directed.

Supply and installation collar damper of size 400x200x150 mm for connecting between duct and exhaust hood made out of GI 20 SWG with air control lever complete all as specified and as directed..

Supply and fix anti vibration bush with MS fabricated stand frame angle of size 50x50x5mm thick for resting blower complete all as specified and as directed.

SCHEDULE 'A' PART XX (MISCELLANEOUS ITEMS) Note: This schedule is not pre-priced by MES and the pre-priced rate left "BLANK" under column 5 signifies this fact only.

INTERNAL ELECTRIC SUPPLY

Material and labour for concealed sub main wiring complete all as specified with Six runs of 1100 Volts grade 10.0 Sqmm PVC insulated FRLSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking (3Phase, 1Neutral and 2Earth) in and including non metallic rigid PVC conduit medium grade with ISI mark of suitable size with all accessories concealed in wall/ceiling /floor/roof etc,.and the earth wire to be connected to common earth dolly etc., complete all as specified and as directed.

Note: (i) Six runs of 10.0 sqmm copper wire and one run of suitable size of non metallic rigid PVC conduit medium grade shall be considered as one unit length. (ii) Colour code for sub main wiring shall be Red, Yellow and Blue for Phase, Black for neutral and Green for earth.

Supply, fix, test and commissioning of Wall mounting fan 450mm with all fixing arrangement all as per Model Airboll Hi-Speed of Havells or techno commercially equivalent of other specified makes, connecting up including provn of three core flexible copper wire of suitable size from ceiling rose to fan all as specified and as directed.

Supply and Fix 20W, decorative, wall mounted, ultra slim, polycarbonate, LED lighting fixture (605x66x76)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver complete all as per Cat No. STOUTPLUS600BS20WLED840SPCWH of Havells or techno-commercially equivalent of other specified makes with all fixing arrangement etc., complete all as specified and as directed.

Supply and Fix 40W, decorative, wall mounted, ultra slim, polycarbonate, LED lighting fixture, (1205 x 66 x 76)mm, 6500K, with high lumen output, environmental friendly, energy efficient with electronic driver complete all as per Cat No. STOUT PLUS600BS40WLLED840SPCWH of Havells or techno-commercially equivalent of other specified makes with all fixing arrangement etc., complete all as specified and as directed.

Supply and Fix 10W Basic all purpose surface and wall mounted LED batten, 600x24x35mm with polycarbonate housing and integrated electronic driver complete all as per Cat No. LUMILINEBS10WLED865 SPCWH of Havells or techno-commercially equivalent of other specified makes with all fixing arrangement etc., complete all as specified and as directed.

Supply and Fix 3 Watts LED Bed side reading lamp, Aluminium body, , 230 volts with control switch adjustable, duly fixed on wall complete all as per Cat No.48042 of Philips or techno-commercially equivalent of other specified makes with all fixing arrangement etc., complete all as specified and as directed.

Supply, fix, connecting and testing factory made, prewired Vertical type distribution board, (MCCB DB) TPN, 12 way, having degree of protection IP 43 with metal double door, 415 Volts, flush type made out of CRCA sheet metal, duly powder coated and conforming to IS 8623 with 250 Amps rated copper bus bar all as per Cat No.DHDMTVOSRW12 of Havells or 5077 48 of Legrand or 811896 of Indoasian or techno-commercially equivalent of other specified makes with common neutral link earth bar, din bar for mounting MCBs, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor upto the terminal connector/ neutral link, earthing etc as required complete concealed and fixed flush to wall and making good the disturbed surfaces etc., complete all as specified and as directed. Note: MCCBs, MCB TPN and MCB SP will be measured and paid separately.

Supply, fix, connecting and testing MCCB, Four Pole, 200 Amps, 415Volts with breaking capacity 25kA, (lcs=100%lcu) with Adjustable Thermal setting, conforms to IEC 60947 - II, suitable for isolation, fixed short circuit setting, adjustable overload setting lr=(0.8 to 1.0)xln all as per Cat No.830296 of INDOASIAN or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed.

Supply, fix, connecting and testing factory made, distribution board, (MCB DB) TPN, 4 way, having degree of protection IP 43 with metal double door, 415 Volts, flush type made out of CRCA sheet metal, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link all as per Cat No.DHDNTHCDPW04 of Havells or 5076 70 of Legrand or 811840 of INDOASIAN or techno-commercially equivalent of other specified makes with provision for MCB TPN as incomer and 4P MCBs as outgoing and total number of modules equal to 4 + 12, complete concealed and fixed flush to wall and making good the disturbed surfaces etc., complete all as specified and as directed. Note: MCBs will be measured and paid separately.

Supply, fix, connecting and testing factory made, distribution board, (MCB DB) SPN, 8 way, having degree of protection IP 43 with metal double door, 240 Volts, flush type made out of CRCA sheet metal, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link all as per Cat No.DHDPSHODPW08 of Havells or 5076 11 of Legrand or 811807 of INDOASIAN or techno-commercially equivalent of other specified makes with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 2 + 6, complete concealed and fixed flush to wall and making good the disturbed surfaces etc., complete all as specified and as directed. Note: MCBs will be measured and paid separately.

Supply, fix, connecting and testing factory made, distribution board, (MCB DB) SPN, 4 way, having degree of protection IP 43 with metal double door, 240 Volts, flush type made out of CRCA sheet metal, duly powder coated and conforming to IS 8623 with 200 Amps rated copper bus bar with neutral link all as per Cat No.DHDPSHODPW04 of Havells or 5076 10 of Legrand or 811805 of INDOASIAN or techno-commercially equivalent of other specified makes with provision for MCB SPN as incomer and SP MCBs as outgoing and total number of modules equal to 2 + 2, complete concealed and fixed flush to wall and making good the disturbed surfaces etc., complete all as specified and as directed. Note: MCBs will be measured and paid separately.

Supply and fix MCB Four Pole 40 Amps, 415 Volts, C curve, 10 kA all as per Cat No.811240 of INDOASIAN or Cat No.4087 00 of Legrand or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed.

Supply and fix MCB Four Pole 20 Amps, 415 Volts, C curve, 10 kA all as per Cat No.811237 of INDOASIAN or Cat No.4086 97 of Legrand or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed.

Supply and fix MCB SPN 20 Amps, 240 Volts, C curve, 10 kA all as per Cat No.811151 of INDOASIAN or Cat No.4086 15 of Legrand or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed.

Supply and fix MCB SP 6 to 32 Amps, 240 Volts, C curve, 10 kA all as per Cat No.4085 87 to 4085 95 of Legrand or Cat No.811122 to 811129 of INDOASIAN or techno-commercially equivalent of other specified makes etc., complete all as specified and as directed.

ROAD / PATH / CULVERT

Material and Labour for 150 mm compacted thick WMM (Wet mix macadam)in two layers of 75 mm thick each with coarse aggregates of granite, trap or basalt, of specified grading, spread, rolled and consolidated to gradient and camber as required using mechanical paver and rolled to uniform smooth surface using power roller 8 to 12 Tonne complete all as specified and as directed.

Material and labour for preparing bituminous surfaces of road and marking centre lines, stop lines, dashes, arrows etc. and the like on roads pavements with hot applied thermo plastic compound 2.5mm thick of white, golden, yellow or black colour as required and confirming to BS 3262-1989 including reflectorising glass bead @ 0.25 Kg/Sqm as per IRC:35(1997) and as per Clause 803 of MORTH specification with special applicator machine fitted with profile shoe, glass beads dispenser propane tank heater and profile shoe heater with heating arrangement up to 160°C, driven by experienced operator all as per manufacturers' instruction etc., complete all as specified and as directed.

Supply and Fix road studs (cat eye) of size 110mm x 128mm x 29.5mm, weight. 248 gms (appx) made out of ABS Engineering plastic, dynamically designed having high impact strength all as per Dark Eye model No. DA-971-P or equivalent of other specified makes and fitted with 2 Nos. highly reflective reflectors on both sides, fixed with epoxy on bituminous /concrete surfaces as per manufacturer’s instructions complete all as specified and as directed.

Supply and Fix Solar road stud of size 125mm x 125mm and 20mm thick with a shank of 65mm made out of Aluminium Alloy and Polycarbonate (100% water proofing design according to IP 67) electrically operated and designed to operate automatically in the darkness, powered from rechargeable nickel cadmium battery (1.2V/ 1600MA) with high efficiency Mono-Crystalline solar panel 2.4V/ 0.3 Watt consisting of with 6 Nos diode bulbs (3 Nos each side) super bright LED with 10,000 to 18,000 mcd all as per Model. DA 110 (Dhruv) of Dark eye or equivalent of other specified make fixed on bituminous/ concrete surfaces with approved epoxy adhesives as per manufacturer's instructions etc., complete all as specified and as directed.

Supply and Fix Polycarbonate round shaped Convex Mirrors of size 1000mm dia, 1.5mm thick, light weight, single piece polycarbonate lense used for greater damage resistance, good finished, ideal for usage Blind Spots, Parking roads, by lanes and crossing roads and Body is made of ABS/Fiber/Plastic red in colour, with adjustable fixing brackets, nuts & bolts all as per model No. FCMO – 100 of Frontier polymers Pvt Ltd or equivalent of other specified makes including Mounting Hardware MS Pipe 80 mm dia of total length 2.4m (i.e. 0.6m in ground and 1.8m above ground) painted with two coats of Ist quality

synthetic enamel of tint black & white paint over a coat of red oxide primer and embedded in PCC 1:3:6 type C2 (using 40 mm graded aggregates) of size 60cm x 60cm x 75cm including necessary earthwork required for post holes complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of excavation in post hole of any kind of soil/hard surface and making good the disturbed surfaces.

Supply and Fix retro-reflective sign boards made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D 4956-01 in blue and silver white including subject matter, message, symbol and borders etc as per IRC -67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat & pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable size aluminium alloy rivet @ 20 cm C/C to back support frame of size 2.0m x 1.5 m of stainless steel (grade 304) of dia 25mm, mounted and fixed with 2 Nos of 40 mm dia SS (grade 304) vertical post of total length 3.5 m (i.e 0.60m in ground and 2.90m above ground) embedded in PCC 1:3:6 type C2 (using 40 mm graded stone aggregates) of size 0.6m x 0.6m including necessary earthwork required for post holes complete all as specified and as directed.

SEWAGE DISPOSAL

Supply and laying 150mm nominal dia Double Wall Corrugated (DWC) SN-8 pipes (Approx. Internal Dia 148.50mm and Approx. Outer Dia 172.50mm) conforming to IS 16098, ISI marked with corrugated external wall structure and glass internal surfaces with all fittings like socket, bend, couplers etc. as required including cutting, jointing, laid in trenches etc., complete all as specified and as directed.

EXTERNAL WATER SUPPLY

Supply, install, test and commission of Centrifugal electrically driven self priming monoblock pump set with cast iron impeller capable of pumping 536 LPM at 30 Mtr head, squirrel cage TEFC induction motor 3 phase, 415V AC,50 Hz suitable for delivery 536 LPM at 30 Mtr head coupled on common base channel including necessary PCC foundation works, nuts and bolts, copper cable from starter to motor through PVC flexible pipe, suitable size of suction pipe not less than 20 feet or as reqd at site, air release valve, foot valve on suction side complete all as directed and specified

Supply, install, testing and commissioning of sodium hypo chloride solution dozing equipment with 100 Ltr capacity HDPE tank of discharge rate 6 LPH complete all as specified including Initial filling of liquid hypo chlorine solution 100 ltr, connected accessories and connected to discharge pipe line where as directed.

Supply, lay and testing of Ductile Iron pipes of size 100mm bore with spigot & socket ends, cast special, class K7 conforming to IS 8329 with inside surface of centrifugally cast cement mortar lined suitable for tyton joint (Push-on joint) in any length laid to level or to falls in trenches/ on grounds / on supports including DI specials as required at site and jointing with flexible push-on type gasket of electrometric (EPDM) joining materials conforming to IS:5382 and making good for disturbed surfaces of roads, path ways etc while laying the pipe line at site, site clearance for the route of pipe line, welding, cutting the existing CI/DI/MS pipe line of any size up to 400 mm dia for inserting branch connections etc complete all as specified and as directed.

Note: (i) Excavation and earthwork, Returning, filling in and removal of soil shall be measured and paid separately under relevant items. (ii) Contractor is responsible for repair/replacement of any damages to the existing structures etc., during the course of execution.

Construction of valve chamber of internal size 900 x 900 x 900mm including necessary earth work excavation, PCC 1:4:8 in foundation type D2 using 40mm graded stone aggregate, brick wall in CM 1:4 using old size bricks, PCC 1:2:4 type B1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 6mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle as shown in drawing, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer etc, complete all as specified and as directed.

EXTERNAL ELECTRIC SUPPLY

Supply, lay / spread in trenches riddled sand for cushioning of cable to the full width of excavated trench, 8cm thick before laying cable and 15cm thick above the cable, gently punned down, stretching and testing of cable on transformer yard etc., complete all as specified and as directed. Note : Punned thickness will only be considered for payment.

Supply and fix FRP pole box of size 200X181x98mm with all accessories complete with connector and MCB SP 6 Amps for street light. etc., complete all as specified and as directed.

(i) Aluminium bus bar 3 phase & neutral of capacity 1000 Amps (ii) MCCB 4 pole 630 Amps 35KA, - 01 No (INCOMING) (iii) MCCB 4 pole 320 amps 25KA, - 01 No (OUTGOING) (iv) MCCB 4 pole 200 Amps 25 KA - 02 No (Outgoing) (v) MCCB 4 pole 63 Amps 16 KA - 01 No (Outgoing)

(vi) MCB SPN 10 Amps 10 KA - 01 No (Outgoing) (vii) Multifunction meter - 01 No (viii) LED phase indication lamp for 3 phase- 01 Set

S&F cable route indicator Oval shape 200x150x6mm cast iron fixed on 25x25xx6mm angle iron including marking of HT/LT UG Cable duly painted and grouted in PCC

Supply, fix, test and commissioning of compact, Aesthetic, Ecofriendly and Modern integrated solar street light 60W, 24V, 6300 Lumen in extruded aluminium construction with built-in SCC, high efficient monocrystalline Silicon Photo Voltaic panel 250 Wp (2x125wp), Maximum Power Point Tracking (MPPT) charge controller, 2 days backup, Low Maintenance Lead Acid (LMLA) battery 150 Ah, Hot Dip Galvanized Tubular (HDGT) Pole 7.0metre Octagonal shape above ground level etc., all as per Cat No.60 W Solar SLS of Havells or techno-commercially equivalent of other specified make including charge controller with dusk down sensor complete all as specified and as directed

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure etc., complete all as specified and as directed.

COOLING APPLIANCES

Supply and fix voltage stabilizers for automatic operation single phase naturally air cooled indoor type and design for input variation between 170 volts to 250 volts with out put voltage stabilizer at 230 volts with accuracy of ± 2.5% and of capacity 1.0 KVA complete all as specified and as directed.

Supply, install, testing and commissioning of Refrigerator, electric driven, single phase, 230 volt AC, 50 Hz, Frost free, Double door, Energy Efficient BEE 5 Star rated of capacity 310/311 litres of LG Model GL D322JPZZ or techno commercially equivalent of other specified makes complete all as specified and as directed.

FIRE FIGHTING SYSTEMS

Material and labour for Design Fabricating supply and erecting, connecting and testing totally enclosed LT cubicle panel board, 3 Phase, 4 wire system, plinth mounted outdoor type, double door front and back opening type, sloped canopy (Hood) on top extended 100mm all around, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable in and out, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032

shade colour, built in industrial type locking arrangement on front and back, and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Angle iron frame of 50x50x6mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and embedded in PCC 1:2:4, type B1 45 CM below ground level and 15 Cm above ground level and consisting the following:- and testing and commissioning complete all as specified and directed and consisting the following :-

(a) MCCB TPN 6-32 amps, 4 pole, 415 Volt of breaking capacity not less than 16 KA- 01 No (Incomer) (b) MCCB TPN 6-32 amps, 4 pole, 415 Volt of breaking capacity not less than 10 KA - 02 Nos. (Outgoing) (b) DOL starter (with wideband coil & Single phase preventer) with relay range 6-10 Amps suitable for 5 HP motor - 2 Nos. (c) Indicator lamp (R,Y,B) (d) Digital Ammeter with suitable ratio of CTs (e) Digital Volt meter (f) Internal Wiring and connecting the switchgears and accessories (g) Accessories : Mounting bracket & FRP canopy

Supply and fix Rotational Moulded Polyethylene water storage tank, Heavy duty, Antimicrobial, triple layer of capacity 5000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position for fire fighting arrangement including necessary PCC foundation and civil works etc., complete all as specified and as directed.

DEMOLITION OF BUILDINGS E/M ITEMS

Taking down old unserviceable MCB/MCCB DBs of any size and making good the disturbed surface matching to the existing surface complete all as specified and as directed.

Taking down old unserviceable earthing any type complete all as specified and as directed.

Taking down old unserviceable sub main wiring with conduit any type concealed or surface wiring and making good the disturbed surface matching to the existing surface complete all as specified and as directed.

Taking down old unserviceable Switch gears (FP/TPN/SPN) any type complete all as specified and as directed.

GOPAL TEKNOCON PRIVATE LIMITED

varsha construction

CHHABINDRA KUMAR PRADHAN

SREEKRISHNACONSTRUCTIONS

AFSON ENGINEERS & CONTRACTORS

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd

Phoenix Infra