ADDN ALTN TO MD ACCN OFFICERS JCOs AND ORs AT PATIALA

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. including raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick in cement mortar 1:3 as concrete surfaces,on ceilings etc in cemet mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick on brick work or concrete surfaces or in chajjas/parapet walls etc in cemet mortar 1:4 mixing of liquid water proofing compound as per manufacturer's instructions, finished even and fair without using extra cement including fixing of chicken wire mesh as and where directed complete all as specified and as directed by Engineer-in-Charge. Note:- wire mesh shall be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed byEngineer-in-charge.

Supply only chicken wire mesh 30 gauge of size not less than 20x20 mm complete all as specified and directed by Engineer-in-Charge

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder etc complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for prepration of surface and applying 0.5 mm to 1 mm thick wall care putty on walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make the surface smooth and ready for receiving exterior/internal painting complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new surface of walls and applying two coats of oil bound distemper white or tinted over and including a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old surface of walls and applying two coats of oil bound distemper white or tinted over and including a coat of primer complete all as specified and as directed by Engineer-in-Charge.

Material and labour for exterior painting work including complete removal of existing loose paint layers till plaster level by using jet pressure washer and crack filling up to 3mm by using crack seal & up to 10mm by using textured crack filler. Touch-up by using wall putty with silicon additives followed by application of one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and Chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives having anti-algal and Dust pickup resistance properties, Material should be applied (Dilution, Recoating period etc..) as per manufacturer instructions by using fully automatic air less spray machine having flow speed of minimum 1ltr per minute and pressure of 3300 PSI. (Apex Ultima Suprema).complete all as specified and as directed by Engineer-in-charge.

Material and Labour for exterior painting work by application of one coat of Smart Care waterprooof primer on walls and Chajjas with 10% of dilution with water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives having anti-algal and dust pickup resistance properties, Material should be applid (Dilution and Recoating period etc shall be done as per manufacturer instructions) by using fully automatic air less spray machine having flow speed of minimum 1 Ltr per minute and pressure of 3300 PSI complete all as specified and directed by Engineer-in0charge. (Apex Ultima Suprema).

Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces all as specified and directed by Engineer-in-charge.

Material and labour for preparation of old plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces complete all as specified and as directed by Engineer-in-charge..

Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.

Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified. Note : The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. Make/Product: Sika Rustoff 100 or equivalent from Fosroc

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified and. Note : The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and as directed by Engineer-in-charge. Make/Product: SikaTop®-Armatec-108 or equivalent from Fosroc

Material and labour for providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge.Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed by Engineer-in-charge. Product: Sikadur®-32 LP or equivalent from Fosroc

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mm Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and as directed by Engineer-in-charge.. Product: SikaTop®-122 HS or equivalent from Fosroc

Taking down existing plaster from brick work or concrete surface andcleaning the surface properly with water for efforescence treatment and applying two coats of smart care damp proof coating of make Dr fixit (Pedilite Co.), Asian paints,Berger paints, Nerolac paints or equivalent and rendering15 mm thick in CM 1:4 mixed with URP (301) over treated surfaces complete all as directed by Engineer-in-charge. Note : The complete item shall be got executed through the authorised applicator of manufacturer only . Applicator shall be got approved from GE before execution of work.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm including cutting holes and making good required shape and size for hold fast block for new frame complete all as specified and as directed by Engineer-in-charge...

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good required shape and size for hold fast block for new frame complete all as specified and as directed by Engineer-in-charge...

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing , supply & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixingfactory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat single rebete of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifed and directed. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frame/Chowkhat double rebete of size 150 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specifed and as directed by Engineer-in charge. (M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification colour wood colour including necessary stainless steel fittings and fixtures with suitable PVC sheet beading & jointed together with solvent cement supply & fixing in the frame at site omplete all as specifed and as directed by Engineer-in charge

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specifed and as directed by Engineer-in charge

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type plain wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. For fixing stainless steel 304 Grade wire cloth (wire dia. 0.56mm) and Expanded aluminium mesh, wire dia 1.20 mm thickness and mesh aperture size 38x20mm (LWxSW) combinly panel panel area of door excpet stiles and rail to be panelled with mesh wih self tapping round headed screws at requried distance,scres and edges covered with feathered pvc edge beading all round of mesh and WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specifed and as directed by Engineer-in charge.

Supply and fixing 150 mm size stainless steel (304 grade) Butt hinges, complete all as specified and as directed by Engineer in Charge.

Supply and fixing100 mm size stainless steel (304 grade) Butt hinges, complete all as specified and as directed by Engineer in Charge.

Supply and fixing 150 mm size Aluminium tower bolt, complete all as specified and as directed by Engineer in Charge.

Supply and fixing 150 mm size Aluminium handles, complete all as specified and as directed by Engineer in Charge.

Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor with overall length of cover plate150 mm complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250 mm long and fixing with bolts extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including fixing like welding etc complete fixed all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete for Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work ( Reinforcement cut as required to facilitate demolition) complete all as specified.

Material and labour for reinforced cement concrete in 1:1.5:3 type A-I ( using 20 mm graded stone aggregates) as in slabs supported on walls,beams and columns in floors, roofs, landings,balconies, canopies,deck slabs and in shelves and the like. complete all as specified and as directed by Engineer-in-Charge..

Material and labour for formwork to soffits of suspended slabs such as roof slabs,floor slabs,landing and similar work not exceeding 200mm thick (Horizontal or slopping) for rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge..

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers ,lintels, cantilevers,shelves including supports overhangs etc. also splays between floors and beams etc for rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge..

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge..

Material and labour for Mild steel bars , but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete ( unreinforced) of any description and in any position complete all as specifiedand as directed by Engineer-in-Charge.

Material and labour for cement concrete 1:7:12 type F-2 (using 40 mm graded broken brick aggregates) as in mass concrete, fillings of sunken portions etc., complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15 mm thick on brick work or concrete surfaces of sunken portion,in cement mortar 1:3, mixed with liquid water proofing compound as per manufacturer's instructions finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:- Liquid WPC shall be measured and paid separately

Material and labour for laying APP based polymeric membrane minimum weighing 3kg/sqm and 3 layer minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface ie.over and including a coat of bitumen primer applied @ 0.40 Ltr/Sqm of the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps, the layer of membrane shall be laid using butane torch application and seaing all joints etc after the surface by forced application as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge. .

Material and labour for 25mm thick cement concrete 1:2:4 type B-0( using 12.5 mm graded stone aggregate) as in sunken floors, floor finished rough to recieve floor finishes or similar works complete as specified and as directed by Engineer-in-Charge. .

Dismantling brick tiles or terracing tiles single layers on roofs complete all as specified and as directed by Engineer-in-Charge. .

Demolition of Mud in roofs,any thickness, including plastering and leeping( wheather full thickness removed or part thereof) and removing debris away from site complete all as specified and as directed by Engineer-in-Charge. . .

Material and labour for wire brushing and cleaning top surface of concrete,including flashings and junction of parapets removing all loose dirt and washing down the surfaces with water complete all as directed by Engineer-in-Charge.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by Engineer-in-Charge. . .

Material and labour for cement cocrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerbs, mud stops,steps small sumps and like items slightly rounded or chamfered on the edges complete all as specified and as directed by Engineer-in-Charge. . .

Material and labour for cement concrete 1:3:6, type C-1 using 20 mm graded stone aggregates as in foundations, filling, mass concrete as padding over roof, minimum thickness at khurra as 45 mm to maintain a slope of 1:100 complete all as specified and as directed by Engineer-in-Charge. . .

Material and labour for 25cmx25cmx20 mm thick cement concrete tiles laid over and including 15 mm thick screed in cement mortar 1:3 mixed with water liquid water proofing compound as per manufacturer's instructions and joints grouted flush in cement mortat (1:3) complete all as speciied and as directed by Engineer-in-Charge. . . Note : Liquid WPC will be measured and paid for separately.

Material and labour for forming contraction( dummy) joints joints 8 mm x 10 mm as in PCC floors filled with polyurethane elastic adhesive/sealant of approx density 1.30 kg/litre complete all as speciied and as directed by Engineer-in-Charge. . .

Material and labour for providing 25 mm dia GI pipe medium grade spouts 60 cm long complete all as specified and as directed by Engineer-in-Charge. . .

Supply and fixing galvanised miild steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incluing 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and as directed by the Engineer-in-Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Supply and fixing in repair brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair sinks with drainage board made of stainless steel sheet l.00 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for cement concrete type C-2. (1:3:6) using 40mm graded stone agrregate as in sub base of floors , in base for PVC tanks or mass concrete etc complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Granite 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in laid over and including 15 mm thick screed in cement mortar (1:3),including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.

Material andd labour for Baroda green marble, 14-16 mm thick, (table rubbed and polished) machine cut, as in Steps, shelves, RCC counters, window cills & similar situations laid over & including 15 mm thick (average thickness) screed bed in cement mortar (1:3) bedded, jointed with grey cement slurry & pointed with grout of matching shade including rubbing and polishing (Granite finish), complete all as specified and directed by Engineer-in-Charge.

Material and labour for baroda green marble, 14-16 mm thick, (table rubbed and polished) machine cut,as in skirting and dados laid over & including 10 mm thick rendering in cement mortar (1:4) set and jointed in cement slurry and pointed in cement slurry mixed with pigment to match the shade of slab complete all as specified and directed by Engineer-in-Charge..

Rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including cutting, rubbing and polishing (mirror finish), complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and as directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed by Engineer-in-Charge

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc laid over and including 15 mm thick screed bed in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match thecolour of tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface as in skirting or dados etc laid over and including 10 mm thick rendering in cement mortar 1:4. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Material and labour for ceramic glossy finish, joint free premium quality coloured tiles 600 x 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc,laid over and including 10 mm thick rendering in cement mortar (1:4) set and jointed in cement slurry over and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and directed by Engineer-in-Charge. Note : Skirting/Dado should be flushed with the wall plastering.

Material and labour for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors, steps, cills etc. in any pattern of light & dark tiles as approved, in floors etc. laid over & including 20 mm thick screed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair overhead shower125mm dia with 235mm long shower arm including all necessary accessories as recommended by manufacturer for fixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 15 mm dia chromium plated long body Bib Tap cast copper alloy fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. .

Supply and fixing in repair wall mixer telephonic assembly, brass chromium plated, comprising of centre outlet tap, double inlet for hot and cold water with connecting legs and wall flange fancy type suitable for 15 mm tubing fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply andfixing in repair Concealed Stop Cock, fancy type, cast copper alloy Chromium plated with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair single lever Sink mixer with swinging spout with connecting legs and wall flanges, wall mounted fency type cast copper alloy chromium plated screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and as directed by Engineer in Charge.

Supply and fixing in repair Angular Stop Cock, Cast copper alloy, fency type with wall flange, fency type ,chromium plated screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing of vitreous China premium /1st quality was down water closet pan floor mounting (pedestal pattern/EWC) P trap with long arm white/ivory including connection to drain pipe (or outgoing pipe) and with flush pipe 32 mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc and including all necessary accessories like rag bolts/gel gasket etc with PVC pipe so that joint is avoided inside the each building as well as in wall and outlet straight away come out of wall in all floors except G.F. and taking down existing of seat, trap & pipe etc of any description/size complete in all respect all as specified and as directed.

Supply and fixing in repairs vitereous china wash hand basin, white, flat back of size 550 x 400 mm including brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge.

Supply and fixing health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by GE

Supply and fixing PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC flushing cistern of 10 ltr. capacity. valveless syphonic action type, low level, white/ivory/off white with inlet, ball valve, float and including brackets and. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing connection to pipe etc and taking down existing of any description/size cistern complete all as specified and directed by Engineer-in-Charge.

Supply and fixing rotational moulded polyethylene, white colour, triple layered water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position, including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect CPVC to PVC tank including taking down existing water storage tank complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel grating 150x150 mm size square shaped for floor trap fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair 75mm bore UPVC soil, waste and vent pipes (SCH-80) in any length with or without ears, with cement joints, fixed to walls and making necessary connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC(SWR) bends (any radius), for 75mm bore pipes, with access doors, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) junction double,(double T), equal or unequal with access door for 110 mm bore complete all as specified and as directed by Engineer in Charge.

Supply and fixing PVC (SWR) junction double,(double T), equal or unequal with access door for 75 mm bore complete all as specified and as directed by Engineer in Charge.

Supply and fixing in repair 100 mm bore UPVC soil, waste and vent pipes (SCH-80) in any length with or without ears, jointing with solvent, fixed to walls and making necessary connections complete all as specified and directed by Engineer-in-Charge.

Material and labour for laying 100mm bore UPVC soil, waste and vent pipes in any length with or without ears, jointing with solvent, laid in trenches or in floors and making necessary connections, including taking out existing unserviceable pipe complete all as specified and directed by Engineer-in-Charge..

Providing & fixing in repair UPVC floor trap dia of outlet 100mm, with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair PVC(SWR) bend duck foot or heel rest, any radius for 100 mm bore pipe, complete all as specified and as directed by Engineer-in- charge

Supply and fixing PVC(SWR), 100 mm dia of outlet Nahani trap ,plain with grating including jointing to waste pipe with solvent cement embedded in cement concrete (1:2:4) type B1 complete all as specified and as directed by Engineer-in- charge

Supply and fixing PVC(SWR) vent cowl for 75mm bore pipe complete all as specified and as directed by Engineer-in- charge

Supply and fixing PVC(SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed by Engineer-in- charge

Material and labour for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including type 'P' grating complete all as specified and as directed and by Engineer-in- charge

Excavation in trenches n exc exceeding 1.50 m wide and n exceeding 1.50 m in depth; for foundations,laying of pipe, cables etc and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge

Material and labour for cement concrete type D-2 1:4:8 (using 40mm graded stone aggregates) bed to 100mm bore drain pipes complete all as specified and as directed by Engineer-in-Charge

Returning , filling in soft and loose soil including spreading, levelling, water and well ramming in layers not exceeding 25cm thick complete all as specified and as directed Engineer-in-charge

Removal of excavated material soil n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed Engineer-in-charge

Cutting into existing manholes for connecting 100mm internal dia new pipe,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 mix type B-1smooth finished and reforming benching as required complete all as specified and as directed Engineer-in-charge

Material and labour in repair 40mm bore High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to wall,celing or in floors including elbow, tee, socket, bends etc. and making necessary connections complete all as specified and as directed Engineer-in-charge

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars, etc complete all as specified and as directed Engineer-in-charge

Material and labour for brick work using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidusin built in cement mortar (1:6) complete all as specified and as directed Engineer-in-charge

Material and labour for 50 mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection , surfaces finished even and smooth without using extra cement including provision of construction joints filled with polyurethane elastic adhesive/sealan complete all as specified and as directed Engineer-in-charge

Material and labour for Screed bed or bedding layer 15mm thick in Cement mortar 1:6 for laying floor finishes/tiles complete all as specified and as directed Engineer-in-charge

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and as directed Engineer-in-charge

Taking up or down existing steel tubing and connections 20 mm bore complete all as specified and as directed Engineer-in-charge

Supplying and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed by Engineer-in-charge

Supplying and laying of 25mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fittings on walls and ceilings or laying in floors complete all as specified and as directed Engineer-in-charge

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair PVC( SWR) ,110 mm bore, single socketed in any length with rubber ring joints fixed to wals with MS flat iron of size 25 x 3mm clamps,including suitable size bolts, washers, nuts etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Stainless Steel peg set of 6 hooks and including all accessories like screws etc fixed in position complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing acrylic glass shelf assembly of size 600x100 mm for soap dish and placing other things like tooth brushes, comb, tooth paste etc and fixed to walls with plug and brass chromium plated screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 900x750x250mm fixed to walls with plug and brass chromium plated screws complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MS work frame work for Cooler stand/ railing/ roofs/sheds/chajjas etc and like items including necessary welding/fixing with connected plates etc confirming to Fe-290(Grade E-165) grade complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding of any type/size as in CB/wardrobes or fixed in any position incuding hardware (if any) etc of Fe-290(Grade E-165) grade complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 18 mm thick WPC board with min density 600 Kg/cu.m lead free , both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/ bed rooms cabinet sides top and bottom and shelves inside the cabinets complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 18 mm thick WPC board with min density 600 Kg/cu.m lead free, single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen/bed rooms cabinet shutters and shelvescomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 5 mm thick WPC board with min density 600 Kg/cu.m lead free, single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen/bed rooms cabinet shutters and shelves complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Piano/continuous hinge of size 19 mm stainless steel complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,complete all as specified and as directed by Engineer-in-Charge. Make KAFF/Hettich

Supply and fixing , stainless steel 304/gloss chrome/SN finished 150mm long matt finished premium quality D-type cabinet handles complete fixed in position complete all as specified and as directed by Engineer-in-Charge

Supply and fixing ball catchers 304 grade stainless steel finished premium quality suitable for cabinets fixed in position complete all as specified and as directed by Engineer-in-Charge

Supply and fixing Stainless Steel 304 garde Basket cutlery premium quality of size 370x485 mm and weight should not be less than 2 kg fixed in position complete all as specified and as directed by Engineer-in-Charge

Supply and fixing Stainless Steel 304 grade wire Basket of pull out type like plain/cup & saucer /bottle /multi purpose/ 2-3 shelf baskets etc. for kitchens of required size ande fixed in position complete all as specified and as directed by Engineer-in-Charge

Supply and fixing Wardrobe tube/ hanging rod for CB of size 30x15 mm and 0.6 mm thick of stainless steel 304 grade rectangular high gloss finish fixed in position including fixing brackets/screws etccomplete all as specified and as directed by Engineer-in-Charge

Supply and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect complete all as specified and as directed by Engineer-in-Charge including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf and incl hook and eye. Note: Complete shutter window will be treated as single unit and paid as single unit

Supply and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect complete all as specified and as directed by Engineer-in-Charge

Supply and fixing factory made Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section with minimum weight not less than 1.345 kg/sqm and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed by Engineer-in-Charge

Material and labour for form work to edges of concrete flats, RCC/PCC bands floors, roofs and similar works exc 10 cm and not exc 20 cm widefor rough finished surface of concrete to receive plaster etc complete all as specified and as directed by Engineer-in-Charge

Taking down carefully copper/aluminium point wiring for light/Fan/Socket/Power complete including light fitting, switches, celling roses, holders, regulator sockets etc by streching out wires in existing concealed conduit/ surface batten/conduit wiring and making good disturbed surface of walls floors etc complete all as specified and as directed by Engineer-in-Charge

Point wiring (using approved colour coding as per IS) with 1100 volts grade, stranded copper conductor 1.5 Sqmm (nominal area), FRLSH, PVC insulated and unsheathed cable IS 694 marked TEC and FIA approved and including PVC concealed medium grade conduit(thickness not less than 1.5mm and 20 m dia) and its fittings ISI marked PVC junction boxes terminated in sunken/pressed metal flush box for mounting of modular switches/sockets/fan regulators and white cover plate with frame, also including FRLSH PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area) 1100 volts grade, copper conductor cable as earth continuity conductor to common earth and connected to earth dolly including necessary cutting/chases complete all as specified and directed by Engineer-in-Charge for the following:- Notes:(i) Switches and regulators shall be measured and paid for separately.(ii) Wiring shall be done as per colour code in IS for phase, neutral and earth and no loop of earth and neutral wire shall be accepted in the point wiring, the same will move from switch board (iii) The cost of Modular cover plate, Blank plate and metal flush boxes is included in the unit rate quoted for this item. (iv):Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost :- Make of Cable- Havells /Polycab/Anchor, Make of PVC conduit IS: 9537 part-3 -Kalinga/Polycab/PCG/AKG.

One light/Exhaust fan point controlled by one way switch.

One ceiling fan point controlled by one one way switch.

One bell/buzzer point controlled by one push button.

One 3/5 pin socket outlet 5 Amp on the same board with other swithes.

One 3/5 pin 5 Amps socket outlet on indepandant board.

One light point controlled by two way switches

All as per item No 146 above here in before but with 2.5 Sqmm (nominal area) FRLS cable PVC for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green as colour for earth contineouity complete all as specified and as directed by Engineer-in-Charge

Supply and fixing modular switch single pole one way 5/6 Amps, one modulecomplete all as specified and as directed by Engineer-in-Charge.Make: Havells / Ancho /Legrand/Indoasian

Supply and fixing modular switch single pole one way 16 Amps, one module complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand/Indoasian

Supply anf fixing modular switch single pole two way 5/6 Amps, one module complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand/Indoasian

Supply and fixing modular type, socket 6 Amps, 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand/Indoasian

Supply and fixing modular type, socket 6/16 Amps- 2/3 pin combined 2 modular complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand”

Supply and fixing modular type, Bell push 1 way, 6 Amps, 1 module complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand”

Supply and fixing Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed by Engineer-in-Charge. Make: Havells / Anchor /Legrand”

Supply and fixing moudular Ceiling rose in poly carbonate 3 terminal brass flush type 6 Amps,250 volts AC ISI marked, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and as directed by Engineer-in-Charge. Make: Havells/ Anchor /Legrand

Supply and fixing modular fan regulator 230 volts , 120 watt, step type (5 step) socket type, complete all as specified and as directed by Engineer-in-Charge. Make: Anchor /Havells /Legrand.

Supply and fixing modular Angle holders (metal ring) PVC / polycarbonate type with back plate, fixing on 3 mm thick sunmica hylum plastic laminated round sheet 75mm dia complete all as specified and as directed by Engineer-in-Charge. Make: Havells/ Anchor/ Legrand.

Supply and fixing TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 modulecomplete all as specified and as directed by Engineer-in-Charge.Make: Legrand Cat Part No.681133 Havells / Anchor

Supply and fixing LED tube light fitting 1x20 Watt industrial batten type with bipin holders connector block complete with all accessories internally prewired and incl connecting up three core single wire incl 01 no. 20 watt retrofit LED tube rod T8 polycabonate complete all as specified and as directed by Engineer-in-Charge . Make : Havells cat part No.TITANIANEO1213T8SSTL20WLED865SPC or equivalent in Philips/Bajaj

Supply and fixing security light fitting versatile pressure die-cast aluminium with high power LED 35 W as light source complete with LED 35 W 5000K including brackets made out of 40 mm bore light grade GI pipe pipe bent to shape including 02 Nos MS flat 40x5 mm thiclk clamps including nut, boltsand connection complete all as specified and as directed by Engineer-in-Charge . Make : C&S/philips/Havells

Supply and fixing LED mirror light ultra slim with extruded polycarbonate, environmental friendly,energy efficient of capacity 10 watt complete all as specified and as directed by Engineer-in-Charge . Make : Havells Cat Part No. LHEXACP5IN1W010 /C&S/Philips

Supply and fixing LED lamp 12 watt B22 CDL inverter bulb.complete all as specified and as directed by Engineer-in-Charge . Make : Havells Cat Part No. LHLDDDBAIA2R012/Surya/C&S/

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep, 30-35watt,min air delivery 225 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old u/s fans complete all as specified and as directed by Engineer-in-Charge. Make: Havells/Bajaj/philips Note:- Old u/s C/Fan shall be deposited in MES store and obtain thedeposit reciept.

Supply and fixing Exhaust fans steel body AC single phase 220 V-240V of size 300 mm sweep,70 watt, 1400 RPM, 45-50 dB (Noice level), 1850 m3/h, 50 Hz with louver complete all as specified and as directed by Engineer-in-Charge. Makes: Havells cat pat No. FHVVEMTDBB12 or equivalent Bajaj/Philips. Notes:- Fixing of Exhaust Fan on wall with suitable size anchor bolt, making suitable size of hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost (ii) Old u/s Exhaust fan shall be deposited in MES store and obtaint the reciept .

Supply and fixing Exhaust fans steel body AC single phase 220 V-240V of size 230 mm sweep, 45 watt, 1400 RPM, 45-50 dB (Noice level), 860 m3/h, 50 Hz with louver complete all as specified and as directed by Engineer-in-Charge. Make : Havells cat pat No. FHVVEMTDBB09 or equivalent Bajaj/Philips. Notes: Fixing of Exhaust Fan on wall with suitable size anchor bolt, making suitable size of hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost. (ii) Old u/s exhaust fan shall be deposited in MES store and obtain the reciept.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece(hot & cold SS pipe) etc complete all as specified and as directed by Engineer-in-Charge. Make: Havells/Bajaj/Crompton.

Supply and fixing in replacement of existing unserviceable sheet metal enclosure 2 pole with Earth Metal Plug & Socket for incorporating 25A SPN / DP MCB With Plastic Cover complete with 2 pole MCB of 25 Amp complete all as specified and as directed by Engineer-in-Charge.. Make: Havells/Legrand/L&T

Supply and fixing Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic medium grade conduit of 25mm/approprite dia with accessories and fittings and one run of 6.0 sq mm single core multi stranded copper conductor cable as earth continuity conductor including taking down old unserviceable sub main wiring complete all as specified and as directed by Engineer-in-Charge. Make of Cable- Havells/policab/Finolex/RR, Make of PVC conduit - Kinjal/ PCG(Plaza)/ Kalinga/ AKG.Notes:-(i) Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 25mm/approprite dia shall be measured as one run length, (II) Cable required for connection to DBs shall deemed to be incl and shall not be measured separately.(III) Earth wire shall run inside the conduit pipe (IV) Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.

Taking down old unserviceable sub main wiring and S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/approprite dia with accessories and fittings and one run of 4.0 sq mm single core multi stranded copper conductor cable as earth continuity conductorincluding taking down old unserviceable sub main wiring complete all as specified and as directed by Engineer-in-Charge.Make of Cable- Havells/policab/Finolex/RR, Make of PVC conduit - Kinjal/ PCG(Plaza)/ Kalinga/ AKG.Notes:-(i) Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 25mm/approprite dia shall be measured as one run length, (II) Cable required for connection to DBs shall deemed to be incl and shall not be measured separately.(III) Earth wire shall run inside the conduit pipe (IV) Extra length of cable required for connection to MCBs shall deemed to be included in unit rate.

Supply and fixing in replacement of old unserviceable Distribution board (DB) made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 16 way IP 43 (double door) with 200 Amps rated copper bus bar neutral bar ,earth bar ,single pole and neutral 250 volts ,flush to wall omplete all as specified and as directed by Engineer-in-Charge. MAKE- LEGRAND/HAVELLS/L&T

Supply and fixing Inreplacement of old unserviceable MCB single pole,6 to 32 Amp 240 volt B curve 10 KA, IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area including suitable size copper Lugsomplete all as specified and as directed by Engineer-in-Charge MAKE:- LEGRAND/HAVELLS/L&T

Supply and fixing in replacement of sheet metal enclosures Loadline Verticle TPN 4 way distribution boards, double door three phase 415 volts, IP 43 for MCCB, comprising three phase four wire copper strip, 200 Amp bus bar of capacity including one no MCCB four pole 63 amp, 415 volts, 25 KA as incoming and proper connection with copper/aluminium lugs omplete all as specified and as directed by Engineer-in-Charge. Make: Havells Cat Part No.DHDLVDRWAOFO04 (For DB)/Legrand/L&T Make : Havells Cat Part No.IHDA6OBF0063 (For MCCB)/Legrand/L&T Notes :- (i) The DB shall be flush fixed on wall and making good the disturbed surface matching with existing surface shall be part of job at no extra cost. (ii) Blank space in DB shall be covered with blank plates of appropriate size. (iii) Earth wire shall be connected with DB with suitable size of lugs.

Supply and fixing RCBO electromechnical DP 40 Amp, 30mA , (inaccordance with IS-12640-2 & IEC 61009-1), 240V, 50Hz, with 10kA short circuit capacity complete with for ensuring protection from leakage current, short circuit & over load protection omplete all as specified and as directed by Engineer-in-Charge. Make : Havells cat part No. DHBMACDP4030040 or equivalent in other make Legrand/L&T.

Supply and fixing Rigid non-metallic PVC conduit medium grade of external dia 25 mm inclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etcomplete all as specified and as directed by Engineer-in-Charge

Material and labour for Earthing Contuinity conductor or main earthing lead fixed to wall on batten or recess of chases or buried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 4.0mm dia galvanised iron wire complete all as specified and as directed by Engineer-in-Charge.

Material and labour earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6.3 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc.complete all as specified and as directed by Engineer-in-Charge Note: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point. and chamber shall be made 0.5 mtr away from the earthing pit.

Supply and fixing LED bulk head with PDC aluminium milky diffuser light fitting 1x10 Watt white complete with all accessories internally prewired and incl connecting up three core single wire complete all as specified and as directed by Engineer-in-Charge. Make : C&S cat part No. LTB12WLED or equivalent in Havells/Bajaj

Supply and fixing MCCBs 415 V,16 KA, 4 Pole, 63 A, in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP 43 protection ccomplete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB 240 V,SPN, 32 amp in DBs of including proper thimble connections complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing MCB, single pole 240 volts 6 to 32 Amp capacity in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed by Engineer-in-Charge

Supply and fixing elegatly designed sleek surface mounted pressure die-cast aluminium LED luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver of capacity 20 W LED of 5000 K and making good the existing surface as per existing complete all as specified and as directed by Engineer-in-Charge.

Taking down of existing ceiling fans, Exhaust fans and Geysers etc cleaning properly painting and marking MES/serial No and refixing in same or other location complete all as specified and as directed by Enginner-in-charge.

Supply and fixing Exhaust fan AC single phase 230/240 v of size 250 mm sweep 900 rpm Engineering thermoplastic body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including hole making Louver complete all as specified and as directed by Enginner-in-charge.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps,complete all as specified and as directed by Enginner-in-charge.

Supply and fixing in replacement of old unserviceable XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt grade cross sectional area 35 Sqmm and 3.5 core complete all as specified and as directed by Enginner-in-charge. Make: Havells/polycab/Finolex/RR

Material and labour for laying 50 mm bore , light grade ,GI tubing with all fittings for cable protection including MS flat iron 40x5 mm clamps of of requiredno's and size including nut bolts and washer etc complete all as specified and as directed by Enginner-in-charge..

Material and labour for laying dry river sand cusioning in trenches including spreading levelling and hand punning and consolidating, 15 cm before laying of cable and 8 cm after laying of cable for protection of UG cable complete all as specified and as directed by Enginner-in-charge.Note:- Punnd thickness/depth of sand shall only be measured for payment

Supplying and laying in trenches un-reinforced precast concrete cable cover class LV Type 1, flat, size 250mm x 150mm x 40mm for protection of cable complete all as specified and as directed by Enginner-in-charge..

Cutting of hardstanding floor/wall of suitable width and depth for passing/ laying of cable including making the surface to match with surrounding surface complete all as specified and as directed by Enginner-in-charge..

Material and labour for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and as directed by Enginner-in-charge... Note: GI pipe shall be measured and paid seperately under relevant item(s).

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor,along the wall or along the pole complete all as specified and as directed by Enginner-in-charge..

supply and laying XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in replacement of old cable complete all as specified and as directed by Enginner-in-charge..

SKYLARK INDUSTRIES (BID ID -3511697)

M/s Amit Associates (BID ID -3511862)

M/S RAJ KUMAR GUPTA (BID ID -3510438)

Siya constructions (BID ID -3510652)

Shree Construction Co. (BID ID -3510529)

M/s Kataria Construction Company (BID ID -3511555)

M/S Shiv Shakti Enterprises (BID ID -3511221)

Saru Enterprises Pvt Ltd (BID ID -3511371)

Buildtech India (BID ID -3510928)

M/s Arihant Builders (BID ID -3511130)