Repair, upgradation and face lifting of Range office at Hygam WLR.

Amount

Earth work in bulk excavation by manual means over areas

(exceeding 30 cm in depth, 1.5 min width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil:

P/L of stone soling incl. ramming, hand packing and all carriages,

complete job in room fill, trenches, foundation etc. upto lead of 15 km

Providing and laying in position cement concrete of specified grade

including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat

Providing and laying in position cement concrete of specified grade

including curing but excluding the cost of centring and shuttering. All work upto plinth level with: All works upto plinth level 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.I: l ½:3 (1 cement : 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

FORMWORK

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete.

FORMWORK

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-

500D or more. reinforcement@ l l0kglcum

Brick work with common burnt clay (non-modular first class)

bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement: 4 coarse sand)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:

Two or more coats applied@ 1.25 liter/l0sqm over and including one coat of special primer applied@ 0.751iter /l0sqm

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (lcement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of

mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing wood work in frames of doors, windows, clerestory

windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood 0.1 cum

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Second class teak wood 35mm

Providing and fixing wire gauze shutters using galvanized M.S.

wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISi marked M.S. pressed butt hinges bright finished ofrequired size with necessary screws as per direction of Engineer- in-charge :Second class teak wood 35mm

Providing and fixing ISi marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 9.61.1 250xl0 mm 4 no.

Providing and fixing ISi marked oxidized M.S. door latches conforming to IS : 5930 with screws etc. complete : 300x20x6 mm

Providing and fixing ISi marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm 2 no.

Providing and fixing ISi marked oxidized M.S. air hook with necessary screws 2 no.

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry@ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltrs

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast Iron P or Strap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls 1 Nos

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. lNos

Providing and fixing white vitreous china pedestal for wash basinncompletely recessed at the back for the reception of pipes and 1 Nos

Providing and fixing G.I. inlet connection for flush pipe connecting

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 MM DIA 2Nos

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. lNos

Providing and fixing 600xl20x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, raw! plugs, etc. complete. lNos

Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I IC.I pipes 100 mm dia. Pipe, 4 joints

Providing and fixing bend ofrequired degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete:

100 mm dia. Pipe, 2 nos

providing and fixing angle valve of required size

Providing and fixing plain bend of required degree:

100 mm dia. Pipe, 2 nos

Providing and fixing pvc pipes class c. make supreme, prince or equivalent 100 mm dia. Pipe, 5 m

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.

PN-16 pipe, 25mm OD(SDR-7.4) 7 m

providing and fixing bib tap CP brass 1 NO. Make : Hindware,cera or other relevant

P/F Geysers 25 liter including all fixtures

Providing and fixing electrical components. All the installation should comprise of fixing the necessary onduits, wiring, switches, MCBs, panell board,lights,fans etc. Light points(led surface mounted) =2No.s

exhaust Fan points= 1 No.s

Heating point = 1 No.s

Cement concrete flooring 1:2:4 (lcement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete 50 mm thick with 20mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction ofEngineer-in­ charge:

Carriage of different materials by mechanical transport incl head load for stacking at site

Sand 10 km

steel 20 km

cement and tiles 10km

bricks 10 km

Aggregate 10 km

Timber 10 km

JUNAID NASEEM (BID ID -2138838)

M/S AKTHER RASOOL MIR (BID ID -2132922)

M/S GHULAM MOHI UD DIN (BID ID -2134227)