REPAIRS TO POT HOLES, ROAD CARPET, ROAD FURNITURE, DIVIDER WALL AND CERTAIN CIVIL WORKS AT DRDL, ASL AND CERTAIN ADJOINING AREA UNDER AGE B/R I AT KANCHANBAGH, HYDERABAD

Amount

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, complete all as directed.

M&L for applying evenly a priming/tack coat with bituminous primer @ 5 Kg / 10 Sqm, using paving bitumen, complete all as directed.

M&L for for laying bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness in single layer using bitumen of grade VG-30, with 5.50% minimum binder content by weight of total mix using hot mix plant and laid by mechanical paver and rolled and compacted, to required camber and gradient using 8 to 10 ton power roller to a uniform smooth surface, complete all as directed.

M&L for laying premix bituminous macadam 75 mm or less consolidated thickness in single layer using bitumen grade VG-30, with 4% minimum binder content by weight of total mix using hot mix plant and laid by mechanical paver and rolled and compacted, to required camber and gradient using 8 to 10 ton power roller to a uniform smooth surface, complete all as directed

Repairs to pot holes of any depth n.exc 1 Sqm each, including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth making good by applying tack coat using paving bitumen @ 5Kg /10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8KG/10 Sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed including supply of premixed macadam, binder and chipping, depth of poth holes exc 30mm, complete all as directed.

S&F in repairs Cat eyes 100 x 100 x 18.5mm size made out of poly carbonate and ABS moulded body dynamically designed very high impact strength and fitted with 2 Nos highly reflective reflectors (Red/ Yellow colour) including epoxy glue complete all as specified and directed. Make: Dark eye DA-978 OR TECHNO COMMERCIAL EQUIVALENT

Preparation of black bituminous road surfaces and applying thermoplastic road marking paint minimum 2mm thick with an applicator machine and heated mixer, with stirring mechanism at a temprature of 160 degree celcious, laid uniformly as directed. Note : Paint shall confirm to BS-3262 part I &II of 1989 etc, complete as per manufactures instructions. Make : Asain Ltd/ Automat Road Safety or Equivalent.

Taking down cement plaster of road devider wall of any description on stone or brick walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as directed.

M&L for Brick work with Fly ashbricks, straight or curved on plan exc 6m mean radius in CM (1:6),as in road devider wall including demolition of old brick work complete all as directed.

M/L for 10mm thick rendering in cement mortar (1:6), on brick or concrete surfaces finished even & smooth without using extra cement, including preparation of newly plastered surfaces & applying three coats of white wash complete all as directed.

Preparation of old painted surface and applying one coat of exterior emulsion paint on concrete/plastered surfaces over 10 cm width on kerbs/divider etc

Preparation and applying two coats of exterior emulsion paint over one coat of primer on concrete/plastered surfaces over 10 cm width on kerbs/divider etc

M/S GDR CONSTRUCTIONS

M/S DIVIJA BUILDERS

SM CONSTRUCTIONS