Consruction of 6 High Dependency Units and 2 Intesive Care Units Hospital near LBSI Airport, Varanasi, SH Provision of Sub Station equipments and associated works etc.

Amount

Supply ,installation,testing and commissiong of indoor type LT panel (PTTA), made out of 2 mm CRCA sheet steel, totally enclosed, minimum IP 42 protection, free standing, floor mounting, dust and vermin proof ,compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415V, 50 Hz AC supply system with busbars extensible on both sides, interconnections with suitable size of copper lead/ solid aluminium strips, control circuit with breaker control switch , digital type ammeter and voltmeter,LED type indicating lamps, CT's as required, suitable electrical and mechanical interlocking as required between incomers and bus couplers , Incomer and outgoing should be of four pole MCCB with rotary handle, panel should have continous GI earth strip of suitable size throughout the length of panel with earth terminations at both the ends ,cable alleys suitable for bottom or top entry of cables as required including supply & installation of all items as below and as per detailed specifications. Works includes loading & unloading, Positioning,Testing, Commissioning of panel & necessary minor civil works e.g. providing C-C channel etc. complete as per site requirement and as per Instruction of E-I-C. INCOMERS:250 A,4P, 35 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -1 Nos. OUTGOINGS:125 A,4P, 25 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -2 Nos. 63 A,4P, 25 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -8 Nos. 32 A,4P, 25 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -3 Nos. 1 Lot of control wiring & 1 Set of designation plates. Multifunction Meter: Digital Multifunction Meter with all normal electrical parameter (V,A,f) i/c KWh & MD etc.-01 No Indicating lamp : RYB,ON/OFF/TRIP LED type Indicating Lamps for all Incomers & Outgoings. - 01 set BUS BARS: Suitable size TPN Aluminium bus bar but not less than 300 Amps.

Supply ,installation,testing and commissiong of indoor type LT panel (TTA), made out of 2 mm CRCA sheet steel, totally enclosed, minimum IP 42 protection, free standing, floor mounting, dust and vermin proof ,compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415V, 50 Hz AC supply system with busbars extensible on both sides, interconnections with suitable size of copper lead/ solid aluminium strips, control circuit with breaker control switch , digital type ammeter and voltmeter,LED type indicating lamps, CT's as required, suitable electrical and mechanical interlocking as required between incomers and bus couplers , Incomer and outgoing should be of four pole MCCB with rotary handle, panel should have continous GI earth strip of suitable size throughout the length of panel with earth terminations at both the ends ,cable alleys suitable for bottom or top entry of cables as required including supply & installation of all items as below and as per detailed specifications. Works includes loading & unloading, Positioning,Testing, Commissioning of panel & necessary minor civil works e.g. providing C-C channel etc. complete as per site requirement and as per Instruction of E-I-C. INCOMERS:320 A,4P, 36 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -1 Nos. OUTGOINGS:250 A,4P, 36 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -1 Nos. 63 A,4P, 25 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -2 Nos. 32 A,4P, 25 kA,MCCB with thermal magnetic release O/L , S/C (Ics=Icu=100 %) -2 Nos. 1 Lot of control wiring & 1 Set of designation plates. Multifunction Meter: Digital Multifunction Meter with all normal electrical parameter (V,A,f) i/c KWh & MD etc.-01 No Indicating lamp : RYB,ON/OFF/TRIP LED type Indicating Lamps for all Incomers & Outgoings. - 01 set BUS BARS: Suitable size TPN Aluminium bus bar but not less than 400 Amps.

Supply ,installation,testing and commissiong of 250 KVA ,11KV/433Volt,3 phase ,50 Hz ,Dyn 11,outdoor ONAN type,copper wound transformer with off load tap changing arrangement with taping +5% to -10% in steps of 2.5%, having cable end boxes on HV side suitable for 11kv grade arrangement and XPLE aluminium armoured cable on LV side complete with all aceessories i/c first fill of filtered dehydrated oil and confirming to IS 1180 (Level-2) with up to date amendments & as per specification attached complete in all respects as required at site.

Supply of 11 KV grade (11 KV Earthed System) XLPE insulated , PVC sheathed, Aluminium Conductor,Armoured Power cable of size 3X70 sq mm, Conforming to IS: 7098 (Part - II) amended upto date.

Supply of 4 x 10 sq.mm XLPE insulated & PVC sheathed armoured aluminium conductor cable of , 1.1KV grade conforming to I.S : 7098 (Part-I ) with upto date ammendments.

Supply of 4 x 25 sq.mm XLPE insulated & PVC sheathed armoured aluminium conductor cable of , 1.1KV grade conforming to I.S : 7098 (Part-I ) with upto date ammendments.

Supply of 3.5 x 35 sq.mm XLPE insulated & PVC sheathed armoured aluminium conductor cable of , 1.1KV grade conforming to I.S : 7098 (Part-I ) with upto date ammendments.

Supply of 3.5 x 95 sq.mm XLPE insulated & PVC sheathed armoured aluminium conductor cable of , 1.1KV grade conforming to I.S : 7098 (Part-I ) with upto date ammendments.

Supply of 3.5 x 120 sq.mm XLPE insulated & PVC sheathed armoured aluminium conductor cable of , 1.1KV grade conforming to I.S : 7098 (Part-I ) with upto date ammendments.

Supply of 40 mm outer dia PN-6, PE80, ISI Marked HDPE Pipe conforming to IS 4984:2016 with up to date ammendments complete as required.

Supply of 63 mm outer dia PN-6, PE80, ISI Marked HDPE Pipe conforming to IS 4984:2016 with up to date ammendments complete as required.

Supply of 110 mm outer dia PN-6, PE80, ISI Marked HDPE Pipe conforming to IS 4984:2016 with up to date ammendments complete as required.

Laying of 40/63mm dia HDPE/MS Pipe direct in under ground at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required.

Laying of 110 mm dia HDPE/MS Pipe direct in under ground at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required.

Laying of 110 mm dia HDPE/MS Pipe direct in under ground at depth of 120 cm below ground level including soil excavation and refilling the trench etc. as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade cable of size upto 35 sq mm in the existing RCC/ HUME/ METAL / HDPE pipe as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade cable of size above 35 sq mm and upto 95 sq mm in the existing RCC/ HUME/ METAL / HDPE pipe as required.

Laying of one number PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade cable of size above 95 sq mm and upto 185 sq mm in the existing RCC/ HUME/ METAL / HDPE pipe as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade Upto 35 sq. mm (clamped with 1mm thick saddle) on wall surface as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4X10 Sqmm XLPE armoured aluminium conductor cable of 1.1 KVgrade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4X25 Sqmm XLPE armoured aluminium conductor cable of 1.1 KVgrade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5X35 Sqmm XLPE armoured aluminium conductor cable of 1.1 KVgrade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5X95 Sqmm XLPE armoured aluminium conductor cable of 1.1 KVgrade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3.5X120 Sqmm XLPE armoured aluminium conductor cable of 1.1 KVgrade as required.

Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for 3.5 X 120 sq. mm of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70 sq mm of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 70 sq mm of 3 core, XLPE aluminium conductor cable of 11 KV grade as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm Copper strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supply, Installation, Testing and Commissioning of ‘Silent Type’ Diesel Generating set alongwith having Prime Power Rating of 180 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel Engine : Diesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display for following: (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication (vi) RPM indication (vii) Over speed indication (viii) Low lub. Oil trip indication (ix) Engine Hours indication Alternator: Synchronous alternator rated at 180 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- F/H insulation. Base Frame & Foundation : Both the engine and alternator shall be mounted on suitable base frame made of MS fabricated base frame with AVM pads. which shall be installed on existing cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel line work : Daily service inbuilt fuel tank of OEM recommended capacity fabricated out of 2 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. complete with valves, level indications & accessories as required as per specifications and as per OEM recommendations. Exhaust System : Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor. Starting System : 12/24V DC starting system comprising of starter motors, voltage regulator and arrangement for initial excitation complete with suitable nos of batteries and its capacity as per OEM recommendation. Acoustic Enclosure: Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifi cations.

Design, Supply, Installation, Testing and Commissioning of 315 Amp,36 kA capacity indoor and cubicle type AMF panel suitable for 180 KVA DG Set , made out of 2 mm CRCA sheet steel, totally enclosed, IP 42 protection, free standing, floor mounting, dust and vermin proof, compartmentalised, powder coated painting suitable for operation on 3 Phase and neutral, 415V, 50 Hz AC supply system , interconnections with suitable size of copper lead/ solid aluminium strips, control circuit with switch , digital type ammeter and voltmeter,LED type indicating lamps, CT's as required and having 02 nos 315 AMP FP MCCB, 35kA (MP Based OC, S/C & E/F protection) for Main & DG Incomers with 315A FP Power Contactors and 01 No. Manual ON Load Changeover for bypass in event failure of AMF i/c required numbers of AMF relay, over current and earth fault relay,over and under voltage relay, alternator and main voltage monitor relay, engine start and engine cranking relay. Panel should have continous suitable size GI earth strip throughout the length of panel with earth terminations at both the ends ,cable alleys suitable for bottom entry of cables including supply & installation of all items as trequired and as per tender technical specification . Works includes required minor civil works like providing C- chanel etc as required at site. Loading & unloading, Positioning, Testing and Commissioning of panel complete as per site requirement and as per Instruction of E-I-C.

Providing and laying in position cement concrete 1:2:4 (1cement: 2 coarse sand :4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supply and fixing of minimum 125mm dia. size ,Class C MS Piping with 50mm thick mineralwool/glasswool/Rockwool insulation (of 46 kg per cubic meter density) around the exhaust pipes of 180 KVA DG set including cladding with aluminium sheet of 0.60mm thick for exhaust including providing suitable bends, reducers & supporting arrangement at suitable intervals for attaching the pipe to existing RCC /steel structure, painting etc. as required.

Providing & fixing for MS support structure for exhaust fume pipes from DG Sets (Exhaust pipe to be measured and paid for separately) for bottom support along horizontal and vertical runs upto the height (as per CPCB norms) including cutting, welding etc and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by E-I-C. The design of the support structure shall be done by the contractor and shall be suitable to the exhaust pipe height as per CPCB norms approved , also to get the approval from the E-I-C. before execution etc. as required. Work include all necessary civil work.

Design, detailed engineering Manufacturing, supply,Installation,testing and commisioning of Grid connected roof top solar PV power Plant of the required capacity as per tender specifications i/c transportation,insurance,transit insurance,required civil work for foundation etc, storage of materials,statutory clearances &approvals etc and any other items or accessories required for successful commissioning of power plant.

Supply ,installation testing and commisiong of double pole structure on STP of 11 mtr long alongwith 11 KV disc/pin insulator, suitable MS channel, 11 KV TPMO set , 11KV fuse set, painting , grouting etc complete as required including dismantling of existing structure.

Awasthi Electric Works

jaydeep agency corporation

MEC ENGINEERS