Motor Pumpset at Francethippa water works

Amount

2.6.1A Earthwork in excavation over areas (exceeding 30 cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5m - disposed earth to be levelled and neatly dresses - all kinds of soil.

2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).

6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand).

13.16.1 6mm cement plaster of mix 1:3 (1 cement: 3 fine sand).

15.2.1 Demolishing cement concrete manually /by mechanical means including disposal of material within 50 metres lead -nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

18.26.1 Providing and laying flanged C.I.standard specials such as tees, bends, collars,tapers, caps etc., suitable for flanged jointing as per IS:1538 - upto 300 mm dia.

18.31.1.2 Providing and fixing C.I.sluice valves (with cap) complete with bolts, nuts, rubberinsertions etc. (the tail pieces if required will be paid separately) -100 mm.

31.9.1 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) -15mm nominal bore.

31.48.2E Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200 mm dia.

31.48.8B Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia.

31.48.8D Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200 mm dia.

31.128.1B Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -100mm dia.

31.128.1D Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537&7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -200mm dia.

31.250.1H Supplying of electrically operated wet type submersible motor and pumpset (Texmo/KSB/Taro / Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150 / 200mm dia.), complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(15 HP Submersible motor and pumpset).

31.256.1B Supplying and fixing of fully automatic air break star-delta starter range for 10A to 23A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 15HP to 17.5 HP pumpsets.

31.136.1C Providing, laying and jointing G.I pipes of medium class (blue) (TATA, TNT, Nezone, Apollo, Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including GI specials such as bends,tees, elbow,coupling, reducer etc.,complete all as per IS and CPWD specification. -25mm dia.

31.139.1A Providing and fixing in position G.I. union (UNIQUE/R Brand/ HB Brand/ UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete- 15 mm dia.

31.139.1C Providing and fixing in position G.I. union (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 25 mm dia.

31.141.1 Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 15 mm dia.

31.141.1B Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 25 mm dia.

31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete- 150mm dia.

31.160.1M Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore / Nandi) (1Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer,endcaps etc., complete all as per IS and CPWD specification. - 200mm dia.

31.161.1B Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 50mm dia.

31.172.1H Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 200mm dia.

31.179.1H Providing and fixing in position UPVC fabricated bend (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 200 mm dia.

31.256.1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/L&T/ Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5).

31.257.1 Supplying and fixing of DOL starters 0.5 HP to 5 HP with relay range 0.63 A to 13 A with suitable M.S. angle frame complete.

31.276.1C Supplying of electricallly operated horizontal split casing pump and motor (JYOTHIKIRLOSKAR/BEACON) make AC 3 phase, 415 volts,50 HZ,1500 RPM, squirrel cage motor.The pump shall have bronze impeller, high grade steel shaft, flexible coupling set,including the cost of common, M.S. Base plate, foundation bolts, etc. complete with suitable suction and delivery sizes. (25 HP centrifugal motor and pumpset).

31.277.1B Supplying and fixing of 25 X 25 mm size vaccum pump (KIRLOSKAR/MAXWELL/DEKKAR) make 3 phase monoblock motor and pumpset complete.-2.2 KW/3 HP.

31.278.1A Erection, testing and commissioning of the centrifugal motor pumpset with pipe fittings, etc. complete.- 15 HP to 25 HP motor.

Basic Code No. 1101A Supply and fixing of 1.5 sq. mm ISI marked, FR PVC insulated, single core copper conductor cable.Make: Havells/L&T etc., complete as directed by the Engineer-in-charge.

Basic Code No. 1105A Supply and fixing of 10.0 Sq.mm ISI marked, FR PVC insulated, single core copper conductor cable. Make: Havells/ L&T as directed by the Engineer-in-charge.

Basic Code No. 1710A Supply and fixing of 40 amps. To 63 amps.ratings,TPN MCB, "C" series, 10 B58 KA breaking capacity. Make: Siemens/ABB:- as directed by the Engineer-in-charge.

Basic Code No. 3148 Supply and fixing of 63A cutout fuse unit. Make: Kundan as directed by the Engineer-in-charge.

Basic Code No. 3077 Supply and fixing of 15W incandescent bulb. Make: Philips/ Bajaj as directed by the Engineer-in-charge.

Basic Code No. 3274 Supply and fixing of 4.0 Sqmm, submersible motor 3 core copper flat cable. Make: Kundan/ Polycab etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3276 Supply and fixing of 10.0 sqmm, submersible motor 3 core copper flat cable. Make: Kundan/Polycab etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3051 Supply and fixing of 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajajetc. Complete as directed by the Engineer-in-charge.

Basic Code No. 3112 Supply and fixing of 40W tube light. Make: Philipsetc. complete as directed by the Engineer-in-charge.

Basic Code No. 3127 Supply and fixing of 1200mm sweep double ball bearing ceiling fan. Make: Almonard/ Usha as etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3329 Supply and fixing of Analog Ammeter direct/ CT Range 0-30A. Make: Siemens/ L&T-Hager/ Legrand-Lexic etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3331 Supply and fixing of Analog voltmeter Range 0 - 500 V. Make: Siemens/ L&T Hager/ Legrand-Lexic etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3334 Supply and fixing of 100/5A current transformer (0.5% precision. Make: L&T Hager/ Legrand- Lexic etc. complete as directed by the Engineer-in-charge.

Basic Code No. 3338 Supply and fixing of Toggle Switch. Make: C&S etc. complete as directed by the Engineer-in-charge.

10.20 Providing and fixing bolts including nuts and washers complete.

Basic Code No. 1372F Supply and fixing of 200mm dia (Rubber insertion for flanged pippe joints) etc., complete as directed by the Engineer-in-charge.

NON-PSR Supplying of LED Street light fitting of 40W of model no. EST40CR of make:Fortune Arrt to the existing poles including cost of fittings, installation, transport, testing and warantee period is 3 years etc., complete as directed by the Engineer In-charge.

12.2.11 Fixing testing and commissioning of Sodium vapour/Mercury vapour/ Metal halide street light fittings on existing poles as required:-