REGARDING CONSTRUCTION OF CHANGING ROOM FOR CHANGING CLOTHES AT MANGALNATH GHAT

Painting writing work at changing room

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

HOT FINISHED WELDED TYPE TUBES.-"STEEL WORK IN BUILT UP M.S. TUBULAR SECTION (ROUND, SQUARE OR RECTANGULAR HOLLOW TUBE ETC.) TRUSSES /FRAME WORK ETC./ RAILING WORK ETC. INCLUDING CUTTING, HOISTING FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRI MER, WELDED AND BOLTED INCLUDING SPECIAL SHAPED WASHERS ETC.

SUPPLY & INSTALLATION OF PRECOATED GALVANISED IRON PROFILE SHEETS (SIZE, SHAPE AND PITCH OF CORRUGATION AS APPROVED BY ENGINEER-IN- CHARGE) 0.50 MM ±5% TOTAL COATED THICKNESS (TCT) THICK ZINC COATING 120GSM AS PER IS: 277 IN 240MPA STEEL GRADE, 5-7 MICRONS EPOXY PRIMER ON BOTH SIDE OF THE SHEET AND POLYESTER TOP COAT 15- 18 MICRONS. SHEET SHOULD HAVE PROTECTIVE GUARD FILM OF 25 MICRONS MINIMU M TO AVOID SCRATCHES WHILE TRANSPORTATION AND SHOULD BE SUPPLIED IN SINGLE LENGTH UPTO 12 METER OR AS DESIRED BY ENGINEER-IN CHARGE. THE SHEET SHALL BE FIXED USING SELF DRILLING/SELF TAPPING SCREWS OF SIZE (5.5X 55MM) WITH EPDM SEAL OR WITH POLYMER COATED J OR L H OOKS, BOLTS AND NUTS 8MM DIAMETER WITH BITUMEN AND G.I. LIMPET WASHERS OR WITH G.I. LIMPET WASHERS FILLED WITH WHITE LEAD COMPLETE U PTO ANY PITCH IN HORIZONTAL/VERTICAL OR CURVED SURFACES EXCLUDING THE COST OF PURLINS, RAFTERS AND TRUSSES AND INCLUDING CUTTING TO SIZE AND

IN GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATES AND SIMILAR WORKS."- "PROVIDING AND FIXING M.S. TUBULAR FRAMES FOR DOORS, WINDOWS, VENTILATORS AND CUPBOARD WITH ANY SECTION MADE OF 1.60MM OR 1.25MM THICK M.S. SHEET, JOINTS MITRED AND WELDED AND G RINDED FINISH WITH PROFILES REQUIRED SIZE WITH 15X3MM LUGS 10CM LONG EMBEDDED IN CEMENT CONCRETE M-10 (NOMINAL MIX WITH 20MM MAXIMUM SIZE OF STONE AGGREGATE) BLOCKS 15X10X10CM OR WITH WOODEN PLUGS AND SCREWS OR RAWL PLUGS AND SCREWS OR WITH FIXING CLIPS OR WITH BO LTS AND NUTS AS REQUIRED INCLUDING FIXING OF NECESSARY BUTT HINGES AND SCREWS AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMERS. 1. STEEL WORK WELDED IN BUILT UP SECTIONS/ FRAMED WORK INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER

PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/-FINISHING WITH DELUXE MULTI SURFACE PAINT SYSTEM FOR INTERIORS AND EXTERIORS USING PRIMER AS PER MANUFACTURERS