Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹43.3 L+₹1.6 L (3.88%)Rejected-Finance | L2 | Rejected-Finance Bot being lowest | |
| 3 | L3₹50.9 L+₹9.2 L (22.1%)Rejected-Finance | L3 | Rejected-Finance Bot being lowest |
Tender Value
₹48.1 L
EMD Value
₹96,200
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-35/2022-2023 UPGRADATION ON BLDG NO P-116 AND ADDN/ALTNTO BLDG NO P-94 AT CHANDIMANDIR
2022_MES_533234_1
GE/CHM-35/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹96,200
Yes
29 Aug 2022
23 Jun 2022
6 Aug 2022
23 Jun 2022
30 Jul 2022
9 Jul 2022
Amount
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m deep but not exceeding 3.00m deep for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.
Roughening surface of old concrete floor by picking, seeping clean and washing down with water to remove dust etc incuding brushing neat cement slurry with 3.0kg of cement per Sqm, complete all as specified and directed.
Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
Five layer reinforced with non woven polyester matt, 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing not less than 3.0 kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm with minmum 75mm side overlap and minimum 100mm overlap at ends) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous resistance aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.
Supply only integral water proofing compound (ISI Marked) complete all as specified & directed.
40mm thick PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) , as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (NOTE : water proofing compound to be measured and paid separately)
Rendering 15mm thick plaster in cement mortar 1:3 mixed on brick wall or on concrete surfaces including dubbing coat if required on internal and external faces of parapet on roof top, RCC facia, RCC parapet wall, cornices, ceiling and finishing the surface even and smooth without using extra cement at height exceeding 6 metre but not exceeding 12 metre and applying 2 Coats cement base paint over a coat of white wash including taking down old plaster and removal of debris and providing necessary form work and scaffolding, safety precautions as per site requirement and carriage of all material all as specified and directed by Engineer-in-charge.
Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked complete all as specified and directed.
Glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood (Hollock) open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified & directed.
Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squared tube, fixing in opening at site all as specified & directed.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing mentioned on Srl Page No. 134, 135 and 146 of SSR Part-II including aluminum iron mongery. MAKE : M/S RAJSHREE PLASTIC WOOD, INDORE/SINTEX
Powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates (wall thickness of aluminium section not less than 2mm) including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed
Supply and fix, Powder coated aluminum anodized doors, windows, partition etc, thickness or powder coating of any colour coating not less than 50 micron, with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, complete all as specified and directed Note : (i) Glazing / gauzing shall be measured and paid sapartely . (ii) Items shall be paid as per weight of a section as indoor frame and frame of aluminum partition/ doors/ windows / ventilator/ shutter (iii) The rate quoted shall be inclusive of neoprene beading , aluminium snap beading, glazing clips, cleats, screws, roller and locking arrangement. (iv) Door closer shall be measured and paid separately
Supply only 5 mm thick frosted glass ordinary quality and glazing in square/rectangular shape exc 0.5 sqm in each pane as specified and directed.
Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.
Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.
150mm aluminum anodized barrel tower bolts of extruded section, complete all as specified.
Supply and fix Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.
False ceiling with 12mm thick gypsum board of size 595mmx 595mm on and including standard GI snap grid , framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.
140mm door stopper of aluminium alloy body and tongues anodised with hard drawn steel spring, fixed in floorcomplete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
Steel window as in repair, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 25 hereinbefore but without glazing bar.
Steel ventilator factory made with top hung shutter including hinges, steel peg stay, a shop coat of red oxide primer, fixed as in repairs complete all as specified and directed.
Supply and fix, 4mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, including hacking out old broken glass complete all as specified and directed.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.
Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
Repair to crumple joint comrise the following item :- (i) Taking out existing pre-cast concrete tile/ slab gently and setting aside. (ii) Taking out existing filled material from crumple joint completely upto slab depth / metal cradle and cleaning the entire surface to the entire satisfication of Engineer-in-Charge. (iii) Provision of 0.63 mm thick PGI sheet metal cradle made to shapte as per TD drawing No TD 144(C) sheet 4R/6 (dt 30.10.09) and fixed on crumple joint with approved joint sealer as per manufacturer instuctions. (iv)Filling the joint with approved joint filler and joint sealer to the required depth after applying approved primer as per manufacturer instructions. (v) sealing the crumple joint with approved joint sealer (vi) Provn of cement plaster and two layers of 3m thick, five layered APP modified polymeric membrane as shown on TD 144(C) sheet 4R/6 (dt 30.10.09). For fixing second layer of APP membrane approved bitumen primer shall be applied @ 0.4 litre/sqm
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises complete as specified and directed.
Glazed ceramic tiles, coloured in vertical surface 350mm x 250mm x 7mm, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Non skid ceramic coloured tiles, joint free, first quality, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed.
coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 including dismantling of old existing tiles complete all as specified and directed
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair in cement mortar (1:4), complete all as specified.
10mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.
Preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, including complete removal of existing treatment complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, over a coat of primer complete all as specified and directed.
Applying two coats of oil bound distemper on new plastered wall surface complete all as specified and directed.
preparation of old decorated plastered or unplastered surfaces of walls, applying two coats of oil bound distemper complete all as specified and directed.
Two coats of white washing on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.
One coat of white washing on old ceiling/chajja surfaces including preparation of celing surfaces complete all as specified and directed.
Three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm dia ball valve, including dismantling of existing water tank and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed.
PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius complete all as specified and directed.
75mm bore PVC (SWR) bends any radius complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.
Brick work sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including dismantling old sheets complete all as specified and directed.
Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t including dismantling of old truss complete all as specified & directed by Engineer-in-Charge
Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-Charge
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed.
Machine cut Kota Stone Slab flooring, 20 to 25mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.
Providing cement concrete type D2, 1:5:10 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal of excavated material to distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil, complete all as specified and directed.
Material and labour reinforced cement concrete (M-25 , using 20mm graded crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).
Material and labour form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.
Material and labour providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed
Concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, block complete all as specified and directed
PCC 1:2:4 type B-1 (20 mm graded stone aggs) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and directed.
Mild steel high strength deformed TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel high strength deformed TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified & directed.
CI floor trap 100mm dia with grating including jointing to waste pipe and setting in cement concrete type B-1 (1:2:4) complete all as specified and directed.
Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed.
Stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Bib taps brass, fancy type, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repairs complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed in repairs complete all as specified and directed.
Cast copper alloy, chromium plated towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed in repair, complete all as specified and directed.
vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover fixed in repair complete all as specified and directed.
vitreous china urinal flat back, half stall type, white with grating and union for discharge pipe including waste pipe and waste fittting, fixed in repair complete all as specified and directed.
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Vitreous china wash basin, in repair, white, flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
32mm dia waste coupling / waste fitting of PTMT any colour high-pressure screwed for iron pipe and fixed (minimum weight 45 gms), fixed as in repair complete all as specified and directed.
32mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc ffixed as in repair complete all as specified & directed by Engineer-in-charge.
Plain cement concrete type C-2, 1:3:6 using 40mm graded crushed stone aggregate as in bed to drain pipes including packing under & haunching against the sides of pipes (150mm bore pipe) after the pipe are laid and tested complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .