REPAIR/ REHABILITATION OF MD ACCN IN SECTOR B AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for Mild steel TMT bars 5mm dia and over upto and incl 10mm dia in stirrups,spacers and binders stirrups,spacers and binders and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for reinforced cement concrete M-25 in slabs supported on walls,beams and coloumns in floors,roofs,landings,balconies, canopies, deck slabs and in shelves and like complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for cement concrete M-25 for chullah hoods ,chajjas,stairways(except spiral staircase ) incl steps(square or spandril),string pieces,carriges etc complete any section straight or winding but excluding landingscomple all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for reinforced cement concrete M-25 using 20mm graded crushed stone aggregates as in Beams,cantiliver,bressummers,lintels over 1.5m span complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for reinforced cement concrete M-25 using 20mm graded crushed stone aggregates as in Fins,fascia,louvres,paraprts,and railings exc. 60cm in height ,newels,balustrade,and the likecomplete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for formwork to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar works, not exc 200mm thick (horizontal or sloping) complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for formwork to chullah hoods,chajjas,troughs and similar items incuding edges complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly

M&L for formwork to sides and soffits of floor or roof beams,beams haunching,girdir,bressummers,lintels,cantilivers,shelves including supports ,overhangs etc and also splays between floors and beams complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly

M&L for formwork to staircase with sloping or stepped soffits including risers and stringers(excluding landing) complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly

M&L for formwork to fins,louvers,fasciacomplete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for formwork to edges of concrete flats,treads,breaks in floors, window cills,concrete raillings opening in concrete walls,floors and rofs n exc 20cm wide and sides of RCC/PCC bands in walls ,horizontal or slopping and similar work exc 10cm but n exc 20cm complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

S&F Mild steel framed work of Fe-410-0 as in grills / guard bars shouldered/ welded with steel window / ventilators frames complete all as specified and as in repair as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

Taking down cement plaster of any description, any thickness incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for cement plastering 15mm thick in cement mortar 1:4 for walls/chajjas only including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces etc finished even and fair without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed. NOTE :- WPC will be measured and paid separately as supply only and The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

Supply only integral liquid water proofing compound complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for cement plastering 5 mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished fair and even without using extra cement complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

M&L for Dubbing out avg 10mm thick on irregular face of wall cement plaster 1:4 complete all as specified and directed.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and as directed. NOTE :- The rates incl scaffolding/ladders etc as required up to 12 m bldg height, not paid separatly.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes complete all as specified and directed and making good to disturbed surfaces.

M & L for Providing and fixing factory made extruded aluminium with or without casement windows (with or without provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect, inclusing hold fast and making good the disturbed surfaces as per existing specifications as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. (d) Powder coated aluminium hook and key -1 nos per leaf Note: complete window portion shall be double shutter incl casement window portion. for measurement purpose complete window shall be taken as one unit

M&L for Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beed 20mm size with and complete fixed in all respect, inclusing hold fast and making good the disturbed surfaces as per existing specifications as specified and directed.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified and directed.

M&L for repair to RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out, Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions complete all as specified and directed.

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions complete all as specified and directed.

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and complete all as specified and directed. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified and directed. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C.

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 15mm to 50mm mm thickness. Yield: approx. 0.84 ltr/kg, complete all as specified and as directed. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm. Note for BOQ Item no. 69-72 : Incl all safety equipments, Ropes, safety belts and ladders (Scaffolding) as reqd upto hight of 15 Mtr is included in items

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004 Alkali and fungal resistance dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/sqm over and incl priming coat of exterior applied @ .9ltr/10 sqm over new surfaces complete all as specified and as directed.

Preparation of new or previously untreated surface of iron any discription over 10cm in width or girth,not otherwise described and prming with Red oxide and painting with 2 coat of synthetic enamel complete all as specified and as directed.

M&L for praparing new surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for distempering with first quality acrylic distemper on interior surface having VOC content less than 50gms/ltr of approved manufacturer of req. shade and colour complete all as specified and as directed, Two or more coats on new work.

M&L for preparation of painted/ treated surfaces of walls etc., by complete removal of existing treatment and M & L for applying two coat of cement base paint over a coat of primer) complete all as specified and as directed.

M/S Mukesh Kumar Gupta

rkkataria and sons

FAVOURITE ENGINEERS

RUPINDER SINGH SODHI

ANIL KUMAR AND CO

SWAMI ENGINEERS

KK BUILDERS