Loading…
Loading…
Tender Value
₹4.0 Cr
EMD Value
₹8.0 L
Closing Date
18 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN/HQ
14 conditions · 3 needing a document upload
Item no 10.2 of GCC 2022: Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. As per Clause 10.2 of Indian Railways Standard General Conditions of Contract'2022 with upto date correction slip. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE-I/CT/GCC-2022/Policy dated 14.07.2022]
SIMILAR NATURE OF WORK FOR THIS TENDER WILL BE - ANY CIVIL ENGINEERING WORK vide letter no.W(6)Similar Nature of Work/Loose dated 08.11.2023 issued by PCE/ER/KKK, sl. No.3 of CONSTRUCTION OF BUILDINGS & PLATFORMS.
24 conditions · 6 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Para 5(3) ii. Part I of GCC shall be read as under: The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids [i.e. excluding the last date of submission of bids] [Advance Correction Slip No.5 to Indian Railways Standard General Conditions of Contract, April 2022 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 20.10.2023].
The participating Bidder must submit self certificate [Annexure V & VA as applicable] duly downloaded from the link given in Submission of Document Verification Certificate or documents uploaded along with tender. [Advance Correction Slip No.3 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 26.04.2023 and Advance Correction Slip No.4 vide Executive Director, Civil Engineering(G), Railway Board No.2022/CE-I/CT/GCC-2022/Policy dated 07.08.2023 ].
Maintenance period of contract - The Earnest Money/Bid Security deposited by the contractor will be converted into Security Deposit and will be refunded after six months of the date of completion of the work in all respect to the entire satisfaction of the Railway and on receipt of a certificate from the Assistant Engineer concerned.
All documents in support of fulfillment of eligibility criteria with respect to completion of similar nature of work for Technical Eligibility Criteria and Total contract value for Financial Eligibility Criteria should be submitted/ uploaded online in the website with scanned copy at the time of tender bidding with details showing in Annexure I, IV. No post tender communication, in any form will be made or entertained, after opening of tenders, in this regard. Railways may however call for the originals of the credentials for verification or any clarifications/confirmations on the contents of the documents submitted. Eligibility of tenderers shall be decided solely of the basis of the documents submitted along with the tender offers and any subsequent document whatsoever submitted in this connection would not be given any cognizance for finalization of the tender.
Payment through Letter of Credit is applicable for this tender as per Railway Board's letter no 2017/ACII/9/10 Pt I dated 20.02.2018 & 2018/CE-I/CT/9 dt. 04.06.2018 (Annexure B & C attached).
INSTRUCTION TO BIDDERS: A] The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of his obligations or liabilities hereunder nor will it affect any rights of the railway there under. B] In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest Money Deposit [EMD], performance Guarantee [PG] and Security Deposit [SD] of contract forfeited and agency barred for doing business on entire Indian Railways for 5[five] years.
Shramik kalyan Contractor[s] are requested to get themselves registered on Railways Shramik kalian portal at www.shramikkalyan.indianrailways.gov.in after issuance of letter of acceptance.
Contractor(s)/ Bidders are requested to refer to Clause 46A of Indian Railways Standard General Conditions of Contract'2022 with up to date correction slip for Price Variation Clause (PVC) in works contract. Item no 46A.1 of GCC 2022: Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. [Authority: Executive Director/Civil Engineering(G), Railway Board's letter No.2022/CE- I/CT/GCC-2022/Policy dated 14.07.2022]
For further details related to 'Bid Security' Bidders are requested to please connect para no 23 of the tender documents.
Bidders are requested to refer to para no 9 of tender document [Para 41 & 42 of Part II Standard General Conditions of Contract for "Variations in extent of Contract" of GCC 2022]
In case Agency desires submission of Bid Security in the form of Bank Guarantee, then please refer to para no 23(3) of Instruction to Tenderers for e-tenders, chapter I for further guidance. [Clause 5.0 of Part I of GCC 2022]
Bidders may also upload any relevant document as deemed fit.
GST has been considered during assessment of this instant tender. Tenderer(s) should quote rate inclusive of applicable GST.
Participants tenderer(s) are requested to go through the Railway Board letter no.2022/CE-I/CT/GCC-2022/POLICY/Pt.I(E-3320424) Dtd.13.03.2026 Indian Railways Standard General Conditions of Contract, April 2022 (Advance Correction slip No.11) which is enclosed in documents.
At Kolkata - Provision for extension of Platform at P.F. No.1 and island Platform of P.F.2-3 with other operational facilities at Kolkata station.
TN-133-26-27
TN-133-26-27
Open
Works - General
12 Months
Kolkata, West Bengal
₹0
₹8.0 L
18 Aug 2026
21 Jul 2026
4 Aug 2026
123 items across 2 schedules · ₹4,54,11,748.83 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 750 | 326.68 | 2,45,010 |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 500 | 494.1 | 2,47,050 |
| 3 | All kinds of soil. | cum | 750 | 260.3 | 1,95,225 |
| 4 | Depth not exceeding 1.5 m | Sqm | 350 | 139.95 | 48,982.5 |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 250 | 196 | 49,000 |
| 6 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 400 | 700.5 | 2,80,200 |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | Sqm | 1500 | 17.6 | 26,400 |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 350 | 7,878.5 | 27,57,475 |
| 9 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 125 | 7,294.7 | 9,11,837.5 |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 175 | 10,105.1 | 17,68,392.5 |
| 11 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). | Sqm | 150 | 495.75 | 74,362.5 |
| 12 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 75 | 9,045.75 | 6,78,431.25 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 35 | 10,852.95 | 3,79,853.25 |
| 14 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 750 | 392.15 | 2,94,112.5 |
| 15 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 250 | 927.25 | 2,31,812.5 |
| 16 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 150 | 736.4 | 1,10,460 |
| 17 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 120 | 951.1 | 1,14,132 |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 6500 | 107.85 | 7,01,025 |
| 19 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 3200 | 107.85 | 3,45,120 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 1250 | 7,132.25 | 89,15,312.5 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 250 | 9,105.95 | 22,76,487.5 |
| 22 | cum | 10 | 169.45 | 1,694.5 | |
| 23 | Granite of any colour and shade | Sqm | 50 | 3,617.55 | 1,80,877.5 |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 85 | 1,267.95 | 1,07,775.75 |
| 25 | Sal wood | cum | .1 | 1,16,520.3 | 11,652.03 |
| 26 | 30 mm thick shutters | Sqm | 10 | 2,676.85 | 26,768.5 |
| 27 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 5 | 3,473.85 | 17,369.25 |
| 28 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 25 | 3,167.95 | 79,198.75 |
| 29 | Fixed to steel windows by welding | Kg | 1280 | 219.1 | 2,80,448 |
| 30 | 100x75x3.50 mm | Each | 35 | 62.05 | 2,171.75 |
| 31 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 10 | 983.15 | 9,831.5 |
| 32 | 300x16 mm | Each | 20 | 303.25 | 6,065 |
| 33 | 150x10 mm | Each | 15 | 82.55 | 1,238.25 |
| 34 | 125 mm | Each | 15 | 66.25 | 993.75 |
| 35 | Single rubber stopper | Each | 8 | 39.6 | 316.8 |
| 36 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | Metre | 25 | 570.95 | 14,273.75 |
| 37 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | Sqm | 35 | 3,720.75 | 1,30,226.25 |
| 38 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 11100 | 133.7 | 14,84,070 |
| 39 | Hot finished welded type tubes | Kg | 3500 | 194.4 | 6,80,400 |
| 40 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1000 | 97.2 | 97,200 |
| 41 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. | Sqm | 400 | 792.05 | 3,16,820 |
| 42 | Dark shade pigment using ordinary cement | Sqm | 500 | 1,442.15 | 7,21,075 |
| 43 | Dark shade pigment using ordinary cement | Sqm | 2580 | 1,119.5 | 28,88,310 |
| 44 | 25 mm thick | Sqm | 2405 | 1,948.25 | 46,85,541.25 |
| 45 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 105 | 1,112.7 | 1,16,833.5 |
| 46 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 175 | 4,481.3 | 7,84,227.5 |
| 47 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 95 | 3,071.05 | 2,91,749.75 |
| 48 | 1.60 mm thick with zinc coating not less than 350 gm/m2 | Metre | 1250 | 1,863.9 | 23,29,875 |
| 49 | 110 mm diameter | Metre | 75 | 377.4 | 28,305 |
| 50 | 110 mm bend | Each | 75 | 150.35 | 11,276.25 |
| 51 | 2 mm thick flat | Sqm | 50 | 1,245.65 | 62,282.5 |
| 52 | 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000 mm. | Sqm | 260 | 1,034.1 | 2,68,866 |
| 53 | 1:6 (1 cement: 6 coarse sand) | Sqm | 1100 | 343.65 | 3,78,015 |
| 54 | 1:6 (1 cement: 6 coarse sand) | Sqm | 700 | 395.35 | 2,76,745 |
| 55 | 1:3 (1 cement: 3 fine sand) | Sqm | 350 | 439.25 | 1,53,737.5 |
| 56 | 1:3 (1 cement : 3 fine sand) | Sqm | 500 | 300.45 | 1,50,225 |
| 57 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 225 | 262.7 | 59,107.5 |
| 58 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 450 | 185.65 | 83,542.5 |
| 59 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 250 | 116.9 | 29,225 |
| 60 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 1000 | 160.6 | 1,60,600 |
| 61 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 500 | 193.7 | 96,850 |
| 62 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 2500 | 67.4 | 1,68,500 |
| 63 | Two or more coats on new work | Sqm | 1200 | 155.9 | 1,87,080 |
| 64 | Two or more coats on new work | Sqm | 2500 | 146.8 | 3,67,000 |
| 65 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 1200 | 25.15 | 30,180 |
| 66 | One or more coats on old work | Sqm | 1700 | 102.8 | 1,74,760 |
| 67 | One or more coats on old work | Sqm | 3200 | 96 | 3,07,200 |
| 68 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 2500 | 120.75 | 3,01,875 |
| 69 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 90 | 2,434.25 | 2,19,082.5 |
| 70 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 35 | 3,551.25 | 1,24,293.75 |
| 71 | In cement mortar | cum | 150 | 2,060.2 | 3,09,030 |
| 72 | For thickness of tiles 10 mm to 25 mm | Sqm | 450 | 73.4 | 33,030 |
| 73 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Sqm | 750 | 644.05 | 4,83,037.5 |
| 74 | Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). | cum | 50 | 9,823.8 | 4,91,190 |
| 75 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 250 | 2,017.6 | 5,04,400 |
| 76 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 10 | 6,515.55 | 65,155.5 |
| 77 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 8 | 6,258.75 | 50,070 |
| 78 | Single squatting plate with 5 litre P.V.C. automatic flushing cistern | Each | 15 | 9,256.45 | 1,38,846.75 |
| 79 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. | Each | 25 | 1,550.6 | 38,765 |
| 80 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | Each | 20 | 349.15 | 6,983 |
| 81 | 10 litre capacity - White | Each | 15 | 1,190.65 | 17,859.75 |
| 82 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | 8 | 1,648.95 | 13,191.6 |
| 83 | 32 mm dia | Each | 35 | 103.9 | 3,636.5 |
| 84 | Rectangular shape 453x357 mm | Each | 12 | 1,361.8 | 16,341.6 |
| 85 | Sand cast iron S&S pipe as per IS: 1729 | Metre | 150 | 1,151.9 | 1,72,785 |
| 86 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | Each | 10 | 708.95 | 7,089.5 |
| 87 | 15 mm nominal dia Pipes | Metre | 125 | 286.8 | 35,850 |
| 88 | 20 mm nominal dia Pipes | Metre | 75 | 335 | 25,125 |
| 89 | 25 mm nominal dia Pipes | Metre | 150 | 401.55 | 60,232.5 |
| 90 | 40 mm nominal dia Pipes | Metre | 50 | 563.05 | 28,152.5 |
| 91 | 50 mm nominal dia Pipes | Metre | 50 | 794.25 | 39,712.5 |
| 92 | 15 mm dia nominal bore | Metre | 110 | 366.4 | 40,304 |
| 93 | 20 mm dia nominal bore | Metre | 80 | 437.3 | 34,984 |
| 94 | 25 mm dia nominal bore | Metre | 170 | 551.7 | 93,789 |
| 95 | 15 mm dia nominal bore | Metre | 75 | 322.15 | 24,161.25 |
| 96 | 20 mm dia nominal bore | Metre | 115 | 368.6 | 42,389 |
| 97 | 25 mm dia nominal bore | Metre | 110 | 467.75 | 51,452.5 |
| 98 | 25 mm nominal bore | Each | 12 | 622.4 | 7,468.8 |
| 99 | 40 mm nominal bore | Each | 8 | 826.1 | 6,608.8 |
| 100 | 50 mm nominal bore | Each | 5 | 1,026.65 | 5,133.25 |
| 101 | 25 mm nominal bore | Each | 15 | 464.05 | 6,960.75 |
| 102 | 100 mm dia pipe | Metre | 25 | 1,423.1 | 35,577.5 |
| 103 | 100 mm diameter pipe | Each | 15 | 332 | 4,980 |
| 104 | Class II | Each | 8 | 4,985.85 | 39,886.8 |
| 105 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 8000 | 11 | 88,000 |
| 106 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 75 | 125.6 | 9,420 |
| 107 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 45 | 118.5 | 5,332.5 |
| 108 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | 125 | 112.8 | 14,100 |
| 109 | 100 mm nominal dia | Each | 50 | 37.6 | 1,880 |
| 110 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 15 | 523.8 | 7,857 |
| 111 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 12 | 121.4 | 1,456.8 |
| 112 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 8 | 111.45 | 891.6 |
| 113 | 100 mm dia C.I. Double Flanged Pipe | Metre | 10 | 2,089.35 | 20,893.5 |
| 114 | 22.22 mm outer dia Pipe | Metre | 150 | 599.5 | 89,925 |
| 115 | 42.70 mm outer dia Pipe | Metre | 75 | 943.9 | 70,792.5 |
| 116 | Circular shape 500 mm internal diameter | Each | 20 | 1,172.6 | 23,452 |
| 117 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 50 | 495.05 | 24,752.5 |
| 118 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 75 | 530.9 | 39,817.5 |
| 119 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 45 | 1,176.8 | 52,956 |
| 120 | With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles | Sqm | 110 | 2,207 | 2,42,770 |
| Schedule total | ₹4,31,84,910.08 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRStandardGCC2022AdvanceCorrectionSlipNo11.pdf
ATTACHMENT
Systemimprovement.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-C-LOC2.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
annexureVIBcontractualturnoverdata.pdf
ATTACHMENT
annexureVIABidsecurity.pdf
ATTACHMENT
Annexure--I_a_I_b_IIIII-TechComp.pdf
ATTACHMENT
Annexure-B-LOC.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
ComlCompliance-IVVVIVIIVIIIIXXI.pdf
ATTACHMENT
tmtbarsdecontrolled.pdf
ATTACHMENT
Annexure-V_VA.pdf
ATTACHMENT
GCCACSUPRO_10.pdf
ATTACHMENT
TenderDocumentChapterI-II.pdf
ATTACHMENT
JPODIGGING.pdf
ATTACHMENT
LetterregardingrecommendedlistofBrands_makeofmaterialsdated03.09.2025.pdf
ATTACHMENT
Cesscharge.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .