In view of the Kabad Yatra in the jurisdiction of EDD- Shikarpur, Bsr work of installing insulation sheet on electric poles in the main Kabad route, resagging of lines and other works

Amount

Carriage of followings from ESC. BSR to pit site on kachcha pakka road including loading and unloading chagres at both ends, requird for proper completion of work, distance about to 60 Kms.

STP/PCC from E.S.C Bulandshahr to Site.

Carriage of All line Material from store to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection, Grouting, Guarding, Laying, Sagging, Stringing, Resagging, Chopping and Tightening etc.

Erection of Single support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Laying, sagging. Stringing and binding and jumpering of ACSR Weasel conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Laying, sagging. Stringing and binding and jumpering of ABC Cable on the newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

fixing of Stay rod with Stay wire in proper way with Nozelling.

Grouting of Stay rods .

Guarding of 33 K V line at road crossing by laying 3 Nos. Gl wire of size 6/10 SWG parallel and fixing of lacings (Tilli) at a distance at 1.5 mlrs as per direction of supervising engineer/RESPO mannual it. Includes the cost of labour,T&P carrier etc. required lor proper completing of work.

Resagging of loose and bad sag of L.T./H.T. line.

Chopping of Tree branches..

Tightening of Stay

Grouting of PCC/STP Pole Old

Guarding of 11KV line at road crossin & crowded area.

Eraction of Pole on long span.

Change of broken/Damaged/Missing following Items :-

Disc Insulator

Nut & Bolt off size

Bended X-Arm/Angle/Channel

Ailment of PCC/STP Pole

Re-Straightening of Tilted D/PPCC/ST Pole.

Stay Clamps

D.P. Clamp

Stay Insulator

Wrapping of Plastic Insulation Sheet on STP/Iron/PCC Poles in Kawad Yatra Marg/Temple etc including all material.

Fixing of Bamboo Spacer for L.T. Line for Kawad Road.

Making of Plinth of the Damaged/Broken STP of the welded 03 Nos. Angle Iron piece with the Pole.

Pin Insulator

The folloing material is required to be supplied by the contractor.

Wrapping of plastic sheet on Stay set wires.

Fixing of Bamboo spaces in LT line at about 2-3 meter gap.

Making of Jumpering Base setting by bamboo places around TF plinth/Double Pole for safety of public in crowded area.

Stay clamp.

Stay insulator.

F clamp 33 KV

LT clamp

LT Insulator

Double pole clamp.

Holding clamp for 33 KV cross arm.

Repairing Plinth and Fencing

Before and after Photographs (Black & White) of work with GPS (Location,Date and Time).

Above work shall be done as per UPPCL/RESPO Rules.

C B S ENTERPRISES (BID ID -5276286)

A K ELECTRICAL ENG WORKS (BID ID -5276019)