Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.1 L+₹2.7 L (7.37%)Rejected-Finance 106 1 RAJA RAMMOHAN SARANI KOLKATA 700 009 | KOLKATA | WEST BENGAL | 700009 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹39.2 L+₹2.7 L (7.52%)Rejected-Finance P 21 MANAS BAG KOLKATA 700 056 | KOLKATA | 24 PARAGANAS NORTH | WEST BENGAL | 700056 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹39.4 L+₹3.0 L (8.23%)Rejected-Finance | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹39.7 L+₹3.3 L (8.93%)Rejected-Finance 63E SASHAN KALITALA ROAD KOLKATA 700 008 | KOLKATA | WEST BENGAL | 700008 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
REPAIR/REPLACEMENT TO FOOTPATH, PAVED AREA, OPEN DRAIN CULVERT AND OTHER MISC B / R WKS AT TV COMPLEX AND OLD IMH COMPLEX UNDER GE ALIPORE KOLKATA
2022_MES_554972_2
GE/ALP (8099B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹70,000
Yes
23 Dec 2022
30 Nov 2022
16 Dec 2022
30 Nov 2022
14 Dec 2022
7 Dec 2022
Amount
Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and as directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, apronsm paved laid dry or laid dry and pointed etc complete all as specified and directed.
Material and labour for 80 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-40 Grade with grey cement and pigment complete all as specified and as directed.
All as per item No-03 above but except tiles complete all as specified and directed.
Material and labour for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and pigment complete all as specified and as directed.
All as per item No-05 above but except tiles complete all as specified and directed.
Material and Labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.
Material and Labour for laying silver sand filling under floors or in foundations, for laying of tiles etc including watering and consolidation complete all as specified and as directed.
Material and labour for 20mm pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
Material and labour for hard core of gauge n.exc 63mm,deposited spread and levelled in layer n exc 15cm thick watered and rammed to a true surface of broken stone boulders to fill dipressions/pot holes and bring to proper level and gradient etc complete all as specified and as directed.
Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions complete all as specified and as directed.
Material and labour for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
All as per item No 12 here in before but except brick etc.
Material and labour for brick work with sub class 'B' brick straight or curved on plan any radius half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.
Material and labour for Providing plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in coping and the like including weathering, slightly rounded or chamferred angles and throating as complete all as specified and as directed.
Material and labour for PCC (1:2:4) type B-2 (using 40mm graded stone aggrgate) as in surface channels and drains complete all as specified and as directed.
Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.
All as tem No 16 above but Add or deduct for each 25 mm girth or part thereof over or under 30cm.
Material and Labour for providing facroty made 75mm thick precast RCC cover slab of 3MT load bearing capacity conforming to IS : 12592 (Grade M-30) Complete all as specified and as directed.
Cleaning of deposited earth, silt, debris, sludge, water from drain and removal of debris to outside or inside the premises of MoD land exc. 1.50 km but n exc. 5 km and depositing where directed by Engr-in-Charge. Complete all as specified and as directed. Note : Solid state of debris shall be measured.
Material and Labour for 100mm thick plain Cement concrete type B- 2, (1:2:4) (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as speficied and as directed.
Material and Labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and Labour for glazed earthen wall tiles (7 to 8mm thick) of approved size, colour and designed set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering with cement mortar (1:3) all around tree guard, wall etc complete all as specified and as directed.
Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings complete all as specified and as directed.
Material and labour for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. complete all as specified and as directed.
Material and labour for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.56mm of an colour having tensile strength of Alloy 31000 H4 as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws as specified. complete all as specified and as directed.
S & F in repair for Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L -type or J-type or cranked hook bolt etc complete all as specified and directed.
Dismentling timber scantling 40 sq cm and over in section, (framed work) in any position.
Supply and fixing mild steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specfied and directed by Engr- In - Charge.
Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed
Material and labour for RCC(Nominal Mix) type-B1 (1:2:4) (using 20mm graded stone aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole cover
Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply and Fixing for framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and as directed.
Taking down cement plaster of any description from stone or brick wall/ ceiling etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD land including necessary working platform complete all as specified and as directed.
Material and labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement)etc including necessary working platform complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Material and labour for Preparing new plastered or previously untreated plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
Material and labour for one coat of weather proof exterior emulsion paint on old decorated surface of external walls including preparation to remove all foreign materials including necessary working platform complete all as specified and as directed.
Material and labour for Preparation of old plasteded surface of walls and applying one coat of cement base paint including necessary working platform complete all as specified and as directed.
Preparating of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described, and applying of two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.
Material and labour for one coat of synthetic enamel paint including preparation on old steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.
Material and labour in repair for Granite slab (of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade etc complete all as specified
Demolition and breakingup drain pipes up to 300mm dia (Salt glazed ware, AC or einforced concrete) set in cement mortar etc complete all as specified and directed.
Material and labour for Reinforced concrete pipes, 300 mm dia bore, class NP3, laid and jointed complete with collars etc complete all as specified and directed.
Material and labour for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested etc for 300mm dia pipe complete all as specified and directed.
Supply and fixing Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
Material and labour for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as directed.
Supply and fixing in repair 6 mm thick Gypsum board/calcium silicate board tiles of size 600x600 mm incl proper hanging arangement as required complete all as specified and directed by the Engr-in-charge.
Providing anti termite treatment (post construction) along the external wall below concrete or masonary apron using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 2.25 litre per linear meter including drilling and plugging holes etc in aprons/plinth protection , complete all as specified and directed by Engineer-in-Charge.
Providing anti termite treatment (post construction) of soil under existing floors using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ one litre per holes , 300 mm apart along the junction of floor and walls including drilling and plugging 12 mm dia holes with cement mortar 1:2 ( 1 Cement : 2 coarse sand) to match the existing floors.
Providing anti termite treatment (post construction) of voids in masonary using chemical Chloropyritphos 20 EC or linane 20 EC (ISI Marked) emulsion @ 1.00 litre per holes , at 300 mm intervals including drilling 6 mm dia holes at downward angle of 45 degree and repluging the holes with cement mortar (1:2) to match the existing surface , complete all as specified and directed by Engineer -in-Charge.
Providing anti termite treatment (post construction) at the point of contact of wood work by chemical emulsion ( in oil or kerosene based solution ) @ 0.50 leter / holes by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre angle of 45 degree at 150 mm centre to centre and sealing the same, complete all as specified and as directed.
S &F in repair for concertina coil of dia (600mm/900mm) fixed in steel brackets hooked properly etc complete all as specified and directed.
S &F in repair soldi PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top and junctions required as per site etc complete all as specified and directed.
M & L for cleaning of existing floors / paved area and applying one coat of floor paint combination of Red and yellow over old surfaces etc complete all as specified.
BHASKAR SUPPLY AGENCY
THE PLANTERS ENGINEERING CORPORATION
ESS PEE UDYOG
DK Contractor
DIPAK ENTERPRISE
CHATTERJEE CONSTRUCTION
KWALITY CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .