REPAIR TO FALSE CEILING, WALL PANELLING, ROOF TREATMENT, FRP CHAJJAH, CRUMPLE REPAIR AND CERTAIN CIVIL WORKS UNDER AGE B/R (CENTRAL) AT COLABA, MUMBAI

Amount

Dismantling wall and ceiling boards or insulation boards of any thickness, any description, including cover fillets all as specified and directed.

S&F Solid PVC wall Lining consisting of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed Make : Rajshree/ Navratan or equivalent, sample as approved by GE

M&L E-board tiles ceiling on GI powder coated channel/ Tee/Grid of make (Armstrong or equivalent) frame work with the following specifications including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) Material and Labour for Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) Supply and fixing 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners (c) Supply and fixing GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) Supply and fixing E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

Demolition/ taking down existing roof treatment including PCC padding by picking sweeping, cleaning and washing down with water to remove dust, durt etc and brushing neat cement slurry @ 3 KG/sqm all as specified and directed

M&L PCC padding 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness 25 mm average top surface of pain cement concrete padding shall be furnished even and smooth without using extra cement all as specified and directed

M&L 15 mm thick screed bed ing CM 1:4 all as specified and directed

M & L for applying Bituminious primer on roof surface conforming to IS-3384 bof 1986 @ 0.70 Kg/sqm and ap[plying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3 mm thick reinforced with non-woven polyster matt laid on primed surface by torch application complete all as specified with overlap of 100 mm overlap to be thermo fushed by flame all as specified.

M&L applying one coat of aluminium paint at the rate of 100 gms/sqm as per manufacturers instructions over bituminous layer all as specified and directed

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in lintel up to 1.5 m clear span,cills, steps, seismic and other similar bands, plinth course, lacing cource, parapet, railing, coping, apex stone, bed plate, kerb slightly rounded all as specified and directed

S&F in repairs 0.56 mm thick Aluminium plain sheet alloying 31000H4 in cruple covering, ridge, hips, valley gutter, drip, straight flashing, door covering all as specified and directed

Dismantling boarding /partition of any description and fixed in any position all as specified and directed

S&F powder coated Aliminium work for door, ventilator and partition (fixed portion) with extruded built up standard tubular section/appropriate z section and other section of approved make, fixing with dash fastner of required dia and size including necessary filing up the gaps at junction i. e. at top, bottom and side with required EPDM rubber/neoprene gasket etc Aluminium snap beading for glazing/ paneling, CP brass/SS screw all as specified and directed

Hacking out old broken glass (any thickness) from wooden, metal frame all as specified and directed.

S&F sheet glass, ordinary quality 5.5 mm thick and glazed with oil putty or fixed with rubber beading in square not exc 0.5 Sqm in each pane all as specified and directed.

S&F sheet glass, ordinary quality 5.5 mm thick and glazed with oil putty or fixed with rubber beading in square exc 0.5 Sqm in each pane all as specified and directed.

S&F in repair double action floor spring hydaulically regulated made up to minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with SS cover, governiong pivot made of brass other parts made of steel heavy duty all as specified and directed

S&F 12 mm thick toughened Glass as in hinged door, partition automatic doors and similar work including cutting to shape drilling holes all as specified and directed

S&F in repairs SS-304 heavy duty door Buffar of minimum 75 mm length including fixing arrangement all as specified and directed.

S&F in repairs brass 300 mm long ordinary rat tail rod pattern including roller and roller plate all as specified and directed.

S&F in repairs 150 mm long Brass body Floor door stopper and toungue with Hard drawn steel spring all as specified and directed.

S&F in repairs brass Hat and coat hooks solid body 175 mm to 250 mm long all as specified and directed.

S&F in repairs Brass Gate and shutter hooks and eye 200 mm sizes all as specified and directed.

S&F in repairs 40 mm dia brass polish cupboard knob fixed with nut screw and waser of mild steel all as specified and directed.

S&F in repairs 150 mm Haps and staple safty type brass with mild steel hinge pin including bolt to hinge plate and fixed with screw all as specified and directed.

S&F kicking plate any size of galvanised iron sheet 1 mm thick fixed with galvanised screw all as specified and directed.

S&F in reapirs brass chromium plated Finger Plate 200 to 300 mm long 80 to 100 mm wide and 1 mm thick all as specified and directed.

Taking down door/basket/cupboard chowkhat with shutter (without taking off shutters from the frame) area nexc 1.5 Sqm each and removing from site all as specified & directed.

S&F 18 mm thick marine plyboard laminated of any colour with high glossy acrylic sheet of 3 mm thick grade I as per IS 14587 for frame and shutter for kitchen cabinet all as specified and directed by engineer in charge.

S&F 18 to 19 mm thick HDHMR board prelaminated both side with decorative choice laminate exterior grade fix with screw to frame work as in cupboard shutter and other similar works all as specified and directed.

S&F medium weight, cold rolled mild steel, SS finish (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing all as specified and directed.

S&F in repairs stainless steel 304 electro-polished for corrosion resistance modular thali holder/basket having size 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder/basket of size 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg all as specified and directed.

S&F round stainless steel 304 grade 200 mm length cabinet/drawers handles all as specified and directed.

S&F stainlesss steel modular perforated cutlery basket SS 304 of size 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F grain trolley SS 304 with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F stainless steel 304 grade size 180x515x585 mm pull out detergent/spice rack having three shelf with telescopuic drawer channel having weight capacity 6 kg all as specified and directed.

S&F in repairs butt hinges cast brass with, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F in repairs 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F in repairs brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F Aluminium tubular hollow section 50X 25 not exc 900 mm C/C on exceeding column, beam slab to hold cladding etc. and fixing Aluminium composite panel cladding plain metalic of approved colour shade to beam, col, slab in curcular, rectangular shape including cutting, notching, bending to shape as required jointing with silicon jel of approved colour including filling of junction of wall and chajja with silicon and scafolding including erection of or working platform all as specified and directed

S&F in repairs mild steel framed work such as grill, gates, guard bar, ladder, window, balcony, railing framed with welding using angle iron, square bars and round bars section including cutting, welding, revetting all as specified & directed.

M&L in repairs for providing 2 to 2.5 mm thick FRP chajja of approved pattern/shape/size (with sides & front drop etc), colour /pattern as of Mangalore clay tile nor any type (the FRP chajja shall be moulded in gel coat finish the thickness shall be 4 mm and back patti to be additionally reinforced with core matt all resins and pigment shall be weatherablw and UV established, core br fixed in position with and including 8 mm dia and 125mm long split fastener bolts (Shakti or equivalent as approved by the GE ) spaced not more than 45cm C/C and also filing the gaps with polys ulphide sealant including necessary scaffolding/ erection of working platform all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars but excluding ashlar facing dressed stone work and precast concrete articles including removing debrise out side MD land all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

Taking down cement plaster in brick or stone wall including racking out joints, hacking for keys, scruping down eith water all as specified and directed.

M&L for providing and applying average 12-15 mm thick plaster in cement mortar 1:4 for with readymix prepacked proportioned dry mix mortar, blended with PP fibers, on internal surfaces including transporting of material, mixing, curing all as specified and directed.

M&L 3 mm thick (average) wall/ceiling care putty including rubbing with sand paper and making the wall/ceiling old/new surface smooth to the satisfaction of Engineer-in-Charge to receive distempering all as specified and directed. Make-Jk/Birla

M&L for preparation of newly/old plastered brick/concrete surfaces and applying two coats of oil bound distemper all as specified and directed.

M&L for providing & applying anti algal elastomeric exterior wall finish on old wall / newly plastered surfaces including surface preparation, applying suitable wall Primer /base coarse and application of minimum two coats of paint by roller/brush as per manufacturar instructions (preferred make Dr Fixit Rain coat classic, Asian paints (Ultima proteck) Berge or equivallent all as specified and directed.

Taking down door chowkhat with shutter (without taking off shutters from the frame) area exc 1.5 Sqm but nexc 4.00 sqm each all as specified & directed.

S&F collapsible steel gates top hung consisting of channel, pickets pivoting flat bars, top and bottom runner brass handle etc as specified erected in position and securing runner with holdfast and bracket including guard rail complety set all as specified & directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door frames/Chowkhat comprising of 50 X 100 mm size, applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed. Make (a) M/S Rajshri Plastiwood, Indore (b) M/S Sintex Industries Ltd (c) M/S Accucell (d) M/S Dura Plast Extrusion

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 28- 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges shall be measured & paid separately.

S&F mild steel flat iron as in hold fast clamps, strap, stay of rain water, pintle hinge, wall ties, hook for hanging fan, cleat articles conforming to FE 410 -O or FE 310-O all as specified and directed.

S&F SS butt hinges grade 304 medium weight of size 100mm all as specified & directed.

S&F SS 150 mm grade 304 pressed handles oval type stove enamelled black all as specified & directed.

S&F SS barrel tower bolts grade 304 of extruded section 200 mm long all as specified & directed.

S&F 300mm long SS sliding door bolts, plate type, stove enameled black , with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple all as specified & directed. Make for Stainless steel iron mongary:- Classic/ Shalimar/ CLIF/ARGET

S&F in repairs 20 mm dia decorative type curtain rods chromium plated anodised aluminium alloy with fixing brackts and all other connected works all as specified and directed.

S&F Curtain rod side brackets of approved quality all as specified & directed.

M&L for preparation of old wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified & directed.

Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B-1 (using 20 mm fradded crushed stone aggregate) cutting area exceeding half brick but not exc one brick all as specified & directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L granite 18- 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring including 15 mm thick screed beddin CM 1: 6 and all other similar works all as specified and directed.

M&L for Cudappah stone slab 20-25 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring including 15 mm thick screed bed in CM 1: 6 including rounding to edges and all other similar works all as specified and directed.

S&F in repairs wash basins, vitreous china, white, flat back, size 550 X 400X140 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M-15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and table top basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings with silicone sealant all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC 10 litres capacity, low level, syphonic type, white, plastic Twin flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe all as specified and as directed.

S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

S&F in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

S&F in repairs PVC connection 15mm size PTMT nuts of length 450 mm all as specified & directed.

S&F in repairs 15 mm bore fancy type bib taps (two in one) cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repairs 15 mm bore fancy type bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repairs 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator all as specified and directed.

S&F in repairs 15 mm bore fancy type health faucet with SS hose all as specified and as directed.

S&F 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange all as specified and as directed.

S&F in repairs grating square 150mm size of PTMT (minimum 100 gms) all as specified & directed.

S&F in repairs 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed shank and fly nuts all as specified and as directed.

S&F in repairs Brass mortice Lock 4 Lever verticle type 65 mm size all as specified & directed.

S&F in repairs Aluminium (Die cast ) body Door closer hydraulically regulated Designation No 3 universal type suitable for door shutter 851 to 1000 mm in width and weight between 36 to 60 Kg all as specified & directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/columns and in vertical surface all as specified and directed. Aapproved sample as kept in GE Office.

S&F SS-304 Grade writing/fixing letters or figure(Block, Roman, Italic or Indian) Min 250 mm height and minimum 150 mm width with high intensity prismatic /reflective tape ASTM type IV sheet all as specified & directed. Sample as per approved by GE.

S&F in repairs Vitreous China urinal flat back size of 465X355X265 mm white (Minimum) with grating and union for discharge pipe including providing and fixing plug, bedding urinal in CM 1:2, securing urinal to plug with and including 60 mm long brass screw, pointing around urinal back in cement including waste pipe all as specified & directed.

S&F in repairs Vitreous china urinal partition white of Size 310X700mm terminating 40 cm above floor line all as specified & directed.

S&F in repairs Stack clamps for 100 mm bore pipe out of 50 mm by 5 mm flat iron and 165 mm dia round iron stay, including bolt and nuts and securing ends of stays to wall or roof all as specified & directed.

S&F bottle trap of PTMT having minimum water seal of 25 mm (minimum wt 32mm-260gms/40mm-270gms) all as specified & directed.

S&F 40 mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screw for iron pipe all as specified & directed.

S&F in repairs CP 20 mm Push button taps, cast copper alloy screwed for iron pipe all as specified & directed.

M&L Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm height all as specified & directed.

M&L for Bee-wax polishing on surface of any description width or girth including cleaning and preparing of surface all as specified & directed.

M&L French polishing on swooden urfaces of any description including cleaning and prepartion but one or more coat on old surface all as specified & directed.

S&F solar control film 25 micron reflective type (gareware sun control or equivalent) all as specified & directed.

S&F 4 mm Figured glass pin headed type in square n exc 0.5 Sqm each pan all as specified & directed.

binta construction

SN CONSTRUCTION

SHRI SAI ENTERPRISES

HINDUSTAN BUILDERS

SB CONSTRUCTION

SAHU AND SAHU CO.

Vandan Enterprises

Shetty Construction Co

GANGAJAL

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

Shetty Construction Co

SN CONSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

Vandan Enterprises

GANGAJAL

SB CONSTRUCTION

binta construction