SPL REPAIR TO BLDG NO E-147 SPL REPAIR TO RCC OVERHEAD TANK AT ASHWINI LINES PROVN OF HARD STANDING COOK HOUSE AREA AT BLDG NO P-170 AT KHOJATOLI POCKET AND PROVN OF HIGH MAST LIGHTS QTY 02 AT MH NAMKUM UNDER GE RANCHI

Amount

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed .

Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed .

Taking down of wooden shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc., to store and rubbish not exc. 50m

S & F steel windows with side hung shutter including projecting type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars, dovetailed or welded.

All as per item No 5 above but without glazing bars.

Supply & fix factory made steel ventilators fixed type with glazing bars complete all as specified and directed .

Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed.

M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified.

S&F 2nd class hardwood plain solid straight chowkhats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints, supplied & fixed.

Supply & fix second class hard wood (Hollock) 35 mm thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed .

Supply & fix mild steel 150 mm, Helical door spring including roller and roller plate for door shutters complete all as specified and directed .

Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Supply & fix in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Hacking out old broken glass (any thickness), size quality or description from metal frames or wooden frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed .

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty of make Shalimar Hardware or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed .

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed .

Cutting chases, pining in brick wall and making good in CM 1:3 for concealed water tubing, cutting n.exc 10 cm.

Supply, fix 15 mm bore, tubes medium grade ISI Marked, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade ISI Marked, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in repairs Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in reapir 15mm bore Angular Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed.

Supply & fix in repairs vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing complete all as specified & directed.

Supply & fix in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply & fix in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed.

Supply & fix in repairs PVC connections of 450mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing in repairs rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve(in repair) including dismantling existing water tanks complete all as specified & directed.

S&F in reapir Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.(ISI Marked)

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.(ISI Marked)

Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed.

Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.(ISI Marked)

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.(ISI Marked)

Material & labour for 75mm bore PVC floor traps plain fixed in repairs including jointing with solvent cement complete all as specified & directed.

S&F grating doom 100mm dia of PTMT (Minimum weight 25gms).

Supply & fixing MS tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed.

Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long

S & F Plate Rack made out of 0.80 mm thick stainless steel of size size 90cmx75cmx25cm with all internal fittings (as per sample) approved by Engr -in-Charge.

Supply & fix (in repairs) sink with draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Demolition of cement concrete in ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete

Material & labour Non skid coloured Jointfree tiles 7-8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm,on vertical surface such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

Material & labour Non skid coloured Joint free tiles 7-8 mm thick ( square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm,as in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

Material & labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in bed block, copings, benching, roof kerbs etc, incl cutting into bricks or stone wall as required for inserting hold fasts complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified and directed

M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion complete all as directed

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed.

Material & labour for preparation of Old painted surface of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified and directed

Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed

Materials & labour for prepration of newely plastered surfaces of wall and applying two coat of Oil Bound distemper on walls, white or tinned over a coat of chalk whiting complete all as specified & directed.

Dismantling Wall and ceiling boards of any description and any thickness including cover fillets.

M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with aluiminum anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Material & Labour for 18/19 mm thick prelaminated particle boards, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S&F fancy type sofia bracket for the curtain rod (suitable for 20mm dia) of any colour as approved and fixed to rackets all as specified and directed.

S&F in reapir MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved and fixed to rackets all as spcd and directed..

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified and directed.

Dismantling of roof trusses , purlin, rails & fastening etc, of steel section complete all as specified and directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to I. S 1161-1979 FE-410(Gde E-250, quality A).

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment

Demolition of brick work built in CM incl all quoins arches, pillars etc including removing the same where directed complete all as specified & directed .

M&L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

M & L half work with sub class ‘B’ bricks, straight or curved on plan, exc. 6 metre mean radius built in CM(1:4) as in half brick wall complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for

Use & waste of form work to edges of concrete flats, n.exc. 20 cm wide, horizontal or sloping and similar works, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or slopping).

Material & labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, lintel, lintel band etc complete all as specified and directed.

M&L RCC Type A-1 1:1/2:3 (20mm graded aggregate) nominal mix over slabs supported on walls, beams and columns in floor, roofs, landing, balconies canopies, deck slabs and in shelves and the like

Supply & fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending as in stirups complete all as specified and directed.

Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed.

Material & labour for 20 to 25mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs including grinding and mirror polishing complete all as specified and directed.

Material & labour for 20 to 25 mm thick machine cut kota stone slab on vertical surfaces over and including 10 mm thick backing plaster in cement mortar (1:4) complete all as specified and directed.

M&L Making V groove of 10mm wide and 30mm deep or upto the extend of joint/crack present at site over joint/ crack line using electricity operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed . The groove shall be cut on the concrete surface along the joint/crack over RCC structure to be repaired complete all as specified and directed. Note: Work to be executed by the authorized applicator of manufacturer only. Complete all as specified and directed

M&LSealing of exposed 'V' groove of 10mm wide and 30mm deep with Sikagard 694 F(l) or Quick Fix or equivalent solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar cum surface levelling mortar.

M&L Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the joint & crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia nozzle compatible with injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive SikaDur 31 or equivalent to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and directed.

M&L for injection grouting of construction joints with non shrink cement slurry admixed with epoxy grouting Cebex 100 of M/S Fosroc Chemical /SikaGrout -214 IN @ 300 mm C/C including of opening of cracks to a groove of size 12mm X 12 mm, Nozzle at 300 mm C/C including of opening of cracks to be grooved of size 10mm X 10mm fixing of nozzles with fast setting plugging compound Renderoc plug, cutting the extra length of nozzle after grouting all in complete as per manufacturers instructions including necessary scaffolding as required and as per the directions of Engineers incharge complete all as specified and directed.. Seal the nozzle with Sikagard 694 F(l) or equivalent thixotropic epoxy putty after the refusal of grout material from the nozzle. Note: leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost

Providing & Applying Two coats of SikaTopseal 107 or Aqua Arm Top Guard inside of the wall & floor of the tank, a two components ready to use polymer modified cementatious coating . First Coat should be applied horizontzlly and second coat should be applied verticallyThe thickness of coating shall not be less than I .5mm. complete all as specified and directed.

Applying two coats Sikagard 67 or AquArm Tank Coat, a water based epoxy coating certified for portable water on all over the concrete surface from inside.Apply the first coat by brush allow it to dry for 6-8 hrs and then apply 2nd coat and allow it to cure complete 24 hrs The coating shall be applied using brush application. The Thickness after two coating should not be less than 500 microns complete all as specified and directed. 195.00 Sqm

M&L Examining concrete by tapping with light hammer and marking of the loose concrete areas of structural elements in straight line geometrical forms, grooving the edges same with grinder upto 5 -10 mm depth without damaging existing rebars, carefully removing unsound weak/ loose concrete/ cover & concrete around the rebars upto 10 mm depth by low impact high frequency hammer/ chipper without damaging the sound concrete, daily cleaning and stacking of debris at prescribed location in polypropylene/ paper bags, disposing off the debris so generated on weekly basis outside the premises, etc, complete all as specified and directed necessary scaff -folding complete all as specified and directed 3.00 Sqm

M&L cleaning existing reinforcement with wire brush/rotary wire brush to make surface free from rust scales, loose material, dirt etc complete and applying two coats of alkaline rust converting primer Sika Rust Off 100 or ReArm Rust Remover with brush on the existing rebar for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days including surface preparation. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth, complete all as specified and as directed .Note: Work to be executed by the authorised applicator of manufacturer only.

M&L Drilling & Re baring of 12 mm dia x 120mm deep, thoroughly coated with Zinc based reinforcement epoxy AquaArm CoatZP complete all as specified and as required.

M&L Providing and Application Aqua Arm Coat-Zp as passivator/ Anti corrosion coating to the steel reinforcement shall be applied The material shall be two component, cement based polymer modified two component coating for corrosion protection. The material shall be prepacked and ready to use. It shall be fully compatible with the reinstatement methods adopted complete all as specified and as directed by Engrin-charge. This shall include surface preparation and errection of steel porps as required for the application. complete all as specified and directed. Note: Work to be executed by the authorised applicator of manufacturer only.

M&L of two component solvent free epoxy bonding agent Sikadur 32LP/ Re ArmSuperbond or equivalent for bonding old to new concrete . The ready to use epoxy bonding agent shall be applied over old concrete using brush after cleaning of surface of all dust or latiance. The material is supplied as a two part material in preweighed quantities for ready onsite mixing and use. The material shall exhibits the following properties Compressive strength 50 N/mm2 at 7D Flexural strenght 35N/mms at 7 D , Shear strength ION/mm2 at 7D and Tensile strength 20 N/mm2 and Bond Strength of ION/mm2.The new concrete shall be placed within the open time as specified by the manufacturer to ensure maximum bonding and application shall be as per the manufacturer instruction , complete all as specified and as directed. Note: Work to be executed by the authorized applicator of manufacturer

Rebuilding the section of damaged RCC elements to its original size in thickness of 25mm by hand or spray application by Providing and applying Sika MonoTop@- 122F single component, fibre reinforced, sulphate resistant, low shrinkage, high performance cementitious structural repair mortar. Surface finish of the repaired surface by mortar prepared with Water proofing admixture WP-10 or Sika Latex SBR as specified or directed by engineer incharge. Note: Work to be executed by the authorised applicator of manufacturer

M&L Supply and apply a stitched one directioal , high strength CFRP fabric SikaWrap230C in single layer over tie beams and columns as per specification after surface preparation by rounding off sharp edges to 25mm radius and cleaning it properly including thixotropic epoxy based impregnating resin/adhesive Sikadur-330(IN) for low density fabric for base and top coat. Wraping the CFRP fabric to columns or beams at desired orientation using tamping rollers to avoid any air voids etc and sprinking sand over it as per direction and satisfaction of Engineer -In -Charge

Scafolding for 40 metere height overhead tank for structural Repair, maintenance of 25000 gallon overhead tank complete all as directed by Engineer-in-Charge Note: Srl Item No 102 to 114 Work to be executed by the authorized applicator of manufacturer and the completed work is to be certified by any govt college for structral stability for further use of RCC tank for 10 Years and the rates quoted should be included all above charges.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil

Add to last item for every 3 cm or part there of above or below 15 cm average depth.

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M&L Sub base Cement concrete type D2, 1:4:8 (40mm graded aggregate) 100 mm thick.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in drive ways of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed by Eng-in-Charge

Removal of surplus soil of distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed..

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6 complete all specified and directed

Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc and making good to disturbed wall and surface complete all as specified.

M&L Point wiring using approved colour coding as per IS ( Red, black and green for single phase circuit ), with 1.5 Sq mm cross sectional area, single core, multi stranded copper conductor (FRLS) PVC insulated and sheathed electrical cable ISI Marked and including medium grade PVC conduit of dia not less than 20 mm and conduit accessories concealed in wall/surface including mild steel/pressed steel sunkun boxes (with earth dolly) dully painted with two coats of black bituminous paint over a coat of red oxide primer externally, covered with modular sheet for fixing of modular switches, socktes etc including PVC insulated multi-stranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr in Charge at site for the following:- Note - (i) Cost of cutting chassing and making good of disturbed surface all to match with existing surface deemed to quoted rates. (ii) Modular cover plate of any module and back plate with all fittings are included in point wiring.)

All as per item No 124 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5sqmm wire

All as per item No 124 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm earth wire

All as per item No 124 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm complete all as specified and directed.

Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 10 Amp , 240 Volts complete all as specified & directed.

Supply & fixing switch modular type (ISI marked confirming to IS 3854:1997)), single pole, one way 15/16 Amp 240 Volts complete all as specified & directed.

Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6 Amps 2 pin/ 3 pin, 240 Volts complete all as specified & directed. .

Supply & fixing socket modular type (ISI marked) confirming to IS 1293:2005, single pole, 6/16 Amps twin 3 pin power socket ,240 Volts complete all as specified & directed.

S&F ceiling rose, surface backlite, 65x50mm, three terminals,

S&F LED bulkhead 10W with IP 65 protection 240V

S&F 20W LED 6000K (4’) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as directed by Engineer-in-Charge.

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty in concealed conduit including taking down old wiring all accessories complete all as specified and directed. Make- Havells/Finolex

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing .

S & F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 10ways.

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc.complete all as specified and directed

S&F MCB SP 06 to 40 Amps 415V incl all termnials, fitting etc complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz Copper winding of sweep 230 mm including mounting accessories complete all as specified and directed.Make- Havells/Crompton/ Bajaj. Note- cost for making holes for fixing of exhaust fan deemed to be includes in qouted rates.

Supply and fix wall mounted fan plastic body 400 mm sweep 240V 1350 RPM including mounting accessories complete all as specified and directed.Make- Havells/Crompton/ Bajaj.

Supply, errection, testing and commissioning raising and lowering type not less than 15/16Mtr height high mast system shaft in two section suitable for 44m/s wind speed aling with head frame, luminaire carriage suitable for upto 16 luminairies in symmetrical arrangement and other accessories manufactured in factory including raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box.HIGH MAST SYSTEM: Height of the mast not less than 16 Mtr, Design standard PLG 07 of ILP, Basic Wind speed as per IS:875 Part III Design life - 25 yrs; Material construction as per S355 grade as per BS - EN10 025; Base dia - 410mm & Top dia - 150mm; with plate thickness : Bottom - 3mm & Top - 3mm. Cross section of the mast shall be 20 side polygon with BS EN ISO 1461 standard galvanisation. With GI single spike lighting protection finial. The high mast shall have 8 nos of foundation bolt with a PCD of 490mm of TS600 type with 30mm dia and 850mm length. Base plate with a dia of 570mm and thickness of 25mm LUMINAIRE CARRIAGE: Luminaire carriage shall be made of 50NB ERW class B MS Pipe with diameter of carriage ring at 535mm. Construction shall be with 8 arms which are welded and 2 sections capable of holding 16 luminairies. TRAILING CABLE: 5 core 2.5sq mm copper cable with EPR insulation and PCP sheathed. WINCH/POWER TOOL: Winch with double drum, SWL 750Kg integral motor with 1HP capacity with 6 pole, single speed. STAINLESS STEEL WIRE ROPE: Stainless Steel wire with AISI 304 grade and 7/19 construction with 2/3 wire rope of 6mm dia and a 2x2350Kg breaking load capacity. Make: Bajaj /CG or its technical equivalents other make. Note: The rate quoted shall be inclusive of the following: (a) Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates & templates- complete set (b) Supply of suitable copper conductor cable, glands, lugs and wiring from panel to light fittings - 01 Job (c) Construction of suitable shallow RCC foundation with M-20 grade concrete for the mast considering the safe soil bearing capacity at site as 10 t/m² at 2 metre depth with all material and labour all as per Manufacturer's design of foundation drawing as approved by GE. (d) Erection and commissioning of the high mast with the help of suitable equipment. (e) Provision of GI pipe earthing for mast with 2.5m long 40mm dia GI Pipe including connection to mast earth terminal with 32 X 6mm GI flat with all material and labour. (f) Provision of Aviation obstruction light LED type. (g) Provision of lightening arrestor spike. (g) The Contractor shall submit OEM technical specification of High mast for approval of acceptance Officer before placing order. (h) The Contractor shall submit warranty & TC before claiming payments. Note for Item No 144 here in before : (i) The earth work in any strata i.e. excavation,return filling, removal , RCC foundation with foundation bolts manufactured from special steel with nuts, wahsers, anchor plate and template deemed to be included in item rate

Supply and fixing LED floodlight 180 watt made up of die cast aluminium housing with toughned glass and high power LEDs and secondary lenses with IP 66 protection and system efficiency ≥ 125 LPW with option for 3000K 10 KV SPD includes and corrosion resistant complete with driver and lamp.protection complete includinng street light fitting bracket nuts, bolts, washers complete all as specified and directed.

Material and Labour for fabricate, supply and fix MS sheet metal enclosure of size 45x30x20cm depth made out of 2 mm thick double door, including provision of opening for cable entry duly painted with two coats of synthetic enamel paint over one coat of red oxide and suitable fixing MS clamps 40x5mm thick bend to shape drilled with holes suitable for fixing to PCC / Steel tubular pole all as directed and specified and consisting of the following including taking down old enclosure:- (a) Aluminium bus bar chambers 4 strip 300 mm long 100 Amps (b) MCB SPN 32A 10KA "C" 01 Nos (c) Digital Time switch 3P Module,weekly programm with battery back up 100 hrs Current of capacity 16 Amps with change over - 01 Nos

Earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of plate not less than 1.5 m below ground level connected to and including galvanised iron strip 25×4mm (up or 7.5 mtr length) and GI pipe 40 mm light grade for protection of GI earth strip by means of bolts, nuts, checknuts and washers made out of galvanised iron and connected to earth test point as shown in electrical plate No. 3 of SSR Part-1-2009 and as specified or indicated and testing on completion including excavation and earth work any in type of strata available at site, PCC (1:3:6) type C-1 for earth chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire fabric (xpm) weight not less the (4kg/sqm) funnel with GI watering pipe of 20mm bore medium grade, wire nuts and lugs complete all as speified and directed.

Supply, laying and testing of LT UG cable, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured 10 sqmm 4 core complete all as specified and directed. Note : Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Sch 'A'.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables, Foundation filling of poles or stays complete all as specified and as directed.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be ribbed by using sieve to separate composite particles etc as per IS and refiiling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is than gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness only will be considered for paymet.

Supply and laying sub class 'B' bricks of old size or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and as directed.

Material and labour for cutting of bituminious road/ hard standing/PCC path/wall up to a size not exceeding 20cm width and not exceeding 60 cm in depth for laying of protection pipe for cable including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1, 40 mm grade crushed stone aggregate upto existing surface level or removing the any type of tiles carefully and refixing properly as per existing surface complete all as specified and as directed.

Supply and fixing of GI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as speified and directed.

M/S MSD & Associate

BUILDCON ENTERPRISES