REPAIRS TO BARBED WIRE FENCING AND ALLIED WORKS AT SIRSA CAMP AT MILITARY STATION KATIHAR UNDER AGE (I) (AF) PURNEA

Amount

Dismantling fencing wire mesh, any type

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion and making good disturbed ground, post embedded in natural ground.

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface (Soft/loose soil)

M&L for cement concrete in foundation, filling and mass concrete type C-2, 1:3:6 using 40mm graded aggregate as in foundation and as PCC band at ground level to hold bottom line of chain link fencing wire to cover gap.

M&L for Mild steel TMT bars but 6mm to 10mm round bar conforming to Fe-290, Gde E-165 as in woolen bar for fixing chainlink wire mesh.

M&L for Mild steel TMT bars 8mm dia in stirrups, binders, spacers etc, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includig, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured)

Site clearance for fixing of chain link fencing including line wires, any mesh, size

Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns etc rough finished surface square, rectangular on plan or polygonal complete all as specified and as directed.

S&F for posts and struts in fencing including cutting tops to shape and directed ,drilling holes, notching for wire ,etc ,flat iron fillets for securing chainlink/wire mesh including all necessary drilling, bolting or riveting etc, conforming to Fe-290, Gde E-165.

Mils steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long)

M&L for preparation of new steel and iron surfaces of any description exc 10 cm width or girth and applying two coats of synthatic enamel paint over one coat of red oxide primer complete all as specified. Note:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.

M/S. R.K. ENTERPRISES

RAJEEV KUMAR