Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC being lowest | |
| 2 | L2₹17.9 L+₹1.4 L (8.27%)Rejected-Finance | L2 | Rejected-Finance Highest amount quoted |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I UDAIPUR
ASST. GARRISON ENGINEER (I) EKLINGGARH CANTT, UDAIPUR (RAJ.) - 313001
REPAIRS TO STEEL/WOODEN/ALUMINIUM JOINERY AND MISC B/R WORKS IN CERTAIN BLDGS OF OTM ACCN IN ARMY AREA UDAIPUR MIL STN
2022_MES_521244_3
8729/E8/AGE I UDAIPUR
Open Tender
Civil Works
Item Rate
180 days
ARMY AREA UDAIPUR
as per tender documents
5 documents required · 5 mandatory
₹500
AGE I UDAIPUR
₹40,000
Yes
13 Sept 2022
3 Aug 2022
5 Sept 2022
3 Aug 2022
29 Aug 2022
16 Aug 2022
60 days
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed.
Material and labour coloured Glazed ceramic tiles in vertical/horizontal serfaces such as cupboard/almirah/window cill etc. size 600 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles.
Material and labour for 15-18 mm thick green marble slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,polishing and half round moulding complete all as specified and as directed by the EIC.
Material and labour for 18 mm thick Granite (Jet black/Telephonic black) slabs on cooking platform/shelf/flooring etc. machine cut laid over and including cement screed 15mm thick in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting,polishing and half round moulding complete all as specified and as directed by the EIC.
Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).
Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid).
Taking down wooden chowkats or frames area not exceeding 1.50 Square metre and removing from site, complete all as specified and directed
Taking down wooden chowkats or frames area exceeding 1.50sqm but not exceeding 4.00 Square metre and removing from site, complete all as specified and directed
Taking down Shutter not exc 1 sqm each
Taking down Shutter exc. 1 sqm and not exc . 2 sqm each
Material and labour for second class hard wood plain, solid, straight chowkhat or frames, wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.
Supply and fixed 35mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides complete all as specified.
Supply & fixing Iind class IInd class (hollock) factory made 35mm thick plain, framed, panelled shutters (minimum 6 panels), with panels of timber panels are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) (Make- A-1 Teakwood CAT No: A1T-MD2 or Equivalent)
Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters (minimum 4 panels), open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge prepared to slide horizontally on beads including Supply & fixing bead etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. (Make- A-1 Teakwood CAT No: A1T-GD5 or Equivalent)
Supply & fixing Ist class teakwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned a joints including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.
Supply & fixing Ist class teakwood 35mm thick plain design as per direction of Engr-in-charge, framed, panelled shutters (minimum 4 panels), with panels of timber panels are raised and have bevelled or chamfered margins and framing is moulded on solid (for each side) with and including provn of glass with itching of axe or other unit emblem size upto 0.10 sqm in middle rail of door including French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.
Supply and fixing factory made PVC hollow door frame plain or coloured of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number and minimum 02 Nos. for horizontal member), complete all as specified.
Supply and fixing providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) -Door Farme 125mm x 65 mm (Moulded) Single Rebated made from Wood Polymet Compositge (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after appliying PVC solvent cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI/ECHON or EQ." an ISO 9001 - 2015 Certified Company, having good screq holding capcity (Screw Withdrawal srength of (Min, 990 N) Minimum Compressie Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catgegory with property of being termite / borer proof, water / Moisture Proof & Fire retandant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Chage, Material test certificate and authentication should be compulsory provided by the manufacturing company.
Supply and fixing providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) -Door Farme 90mm x 45 mm (Moulded) Single Rebated made from Wood Polymet Compositge (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after appliying PVC solvent cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & manufactured by "RAJSHRI/ECHON or EQ." an ISO 9001 - 2015 Certified Company, having good screq holding capcity (Screw Withdrawal srength of (Min, 990 N) Minimum Compressie Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catgegory with property of being termite / borer proof, water / Moisture Proof & Fire retandant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Chage, Material test certificate and authentication should be compulsory provided by the manufacturing company.
Supply & fixing factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame
Supply & fixing PVC factory made shutter solid, PVC moulded prelam sheet both side front and back plain or coloured shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings.
Supply and fixing factory made uPVC coloured Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (Make: Fenesta/AIS or Eq.)
Supply & fixed steel windows box type ERW hollow 'P' section comprising double frame for and including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CECZ TD -219 sheet 1/3 to 3/3 as applicable complete Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.
Material and labour for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
Material and labour for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
Material and labour for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.
Supply & fixing framed work as in cooler stand (at ground floor upto 2nd floor), doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165)
Material & Labour 18/19mm thick block board ,grade 2 quality interior grade, commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.
Material & Labour Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's i complete all as specified and directed.
Supply & fixing 100 mm long brass butt hinges with galvanised MS hinge pin etc.
Supply & fixing Brass handles size 150 mm, cast type,polished bright
Supply & fixing Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed
Supply & fixing Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and 300 mm long complete all as specified.
Supply & fixing 150mm long aluminium anodised handle cast type and fixed
Supply & fixing 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed
Supply & fixing 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc.
Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.
Supply & fixing double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.
Supply & fixed 75mm long stainless steel handle fixed with nut and screws to cupboard shutter complete all as specified and directed.
Supply & fixing continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.
Supply & fixing alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.
Supply & fixing in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of aluminium, bright finished
Supply & fixing in repair self closing drawer metal under mount full extension drawer sliding channel for kitchen cupboard size 18''/20''. (Make: Haffle/Godrej/Hettich)
Supply & fixing in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long complete all as specified
Taking down existing aluminium shutter with frame area exceeding 1 Sqm and re-fixing in same opening after repair/replace the defective parts (any type of aluminium section) complete.Note : Aluminium parts will be measured and paid separately.
Supply only self closing/auto Casement type hinges 90/180 degree. (Make: Haffle/ Dorma/Hettich)
Supply & fixing in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete.
Supply & fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete.
Supply & fixing in repair Stainless steel wire cloth upto tripple storey bldg, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples (to be fixed upto four storey of bldgs) complete.
Supply & fixing in repair mortice Lock with all fittings for aluminium door. (Make: Godrej/Link/Harrison)
Supply & fixing aluminium handle size & shape as per existing handle for aluminium door or 200 mm long etc. all as directed.
Supply & fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.(Make -Sandhu/Hardwyn/Dorma).
Supply & fixing in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (Die cast) body complete all as specified and directed.(Make -Sandhu/Hardwyn/Kelwyn)
Material and labour for high durability stainless steel glass railing stain/polished grade 304 height between 900 mm to 1100 mm size of railing 50 mm dia, 40mm x 40mm balauster and 20 mm x 20 mm supprting pipe etc including glass clamps etc.
Supply & fixing 12 mm thick frosted toughened glass in rectangular shape area exc. 0.8 sqm to 1.5 sqm including etching area 30 cm x 30 cm as per design given by Engr-in- charge as per direction of Engr-in-charge in railing etc. all as spd and directed.
Supply & fixing 12 mm toughened glass in area not exc. 1.5 sqm each in any shape with and including stianless steel cleat for fixing to jambs/cill or flooring etc. as per direction of Engr-in-charge etc. all as spd and directed.
Supply & fixing toughened glass in frame less doors, 12 mm thick pain/frosted in area exc. 1.5 sqm but not exc 2.5 sqm each in any shape with and including etching area 30 cm x 30 cm as per design as per direction of Engr-in-charge etc. all as spd and directed.
Supply & fixing Stainless Steel Glass Door Single/Double Lock knob/cylinder type, Chrome finish for toughened glass door or alumimium door etc. all as spd and directed. (Make- Ozone or equivalent)
Supply & fixing Stainless Steel Toughened Glass pull Handle C-type nickle finish size 200 mm to 300. etc. all as spd and directed.(Make- Ozone or equivalent)
Supply & fixing Stainless Steel corner, bottom and overall patch fittings, hydaulic or standard type Toughened Glass pull Handle C-type nickle finish size 200 mm to 300. etc. all as spd and directed. (Make- Ozone or equivalent)
Supply & fixing Stainless Steel hydarulic hinge standard size for Toughened Glass Doors etc. all as spd and directed. (Make- Ozone or equivalent)
Supply & fixing Stainless Steel partion hinge wall to glass 90 degree/Glass to Glass 90/180 degree size OR shower hinge for Toughened Glass Doors etc. all as spd and directed. (Make- Ozone or equivalent)
Supply & fixing PVC plain or coloured large size Venetian Blinds roller type vertical or horizontal any type, blinds shall be 1 mm thick and 75 to 100 mm width for windows/ventilators all as spd and directed.
Supply & fixing Aluminium anodised or powder coated door, window, ventilator frame with one or more rebates and shutter sliding or casement windows as reqd. including jointing cleat, glazing clips with EDP gasket for fixing, rubber packing etc. complete all as specified.
Supply & fixing prelaminated particle board 9 mm thick, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worK
Supply & fixing 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Hacking out old broken glass upto tripple storey bldgs (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.
Supply & fixing 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane
Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including taking down existing curtain rod.
Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.
Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.
Supply & fixing of stainless steel decorative fincals (round type with mirror optic finish) trade pattern wall to wall for decorative type curtain rods 22 to 25mm dia as per sample as in repaie complete all as specified.
Material & labour for fabrication of pressed steel cupboard shutter in repair using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3.
Material and labour two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over primed wooden surfaces including preparation of surfaces compelte.
Material and labour two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over shop coated red oxide primed surface including preparation of surfaces complete.
Demolition of brick work or stone/boulder masonry built in cement mortar or concete work including all quoins, arches, pillars etc complete all as specified and directed.
Mateial and Labour brick work with old size fly ash bricks straigth or curved on plain exc.6 M mean radius built in CM 1:6
Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
Material and labour for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed
Material and labour for preparation of newly plastered/old complete removal surfaces of wall and applying two coats of cement base paint complete all as specified.
Material and labour for applying 1 mm thick Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.
Material and labour for applying two coats of distempering with acrylic distemper white or coloured on prepared wall surfaces (putty) or old decorated/plastered surfaces complete all as specified and directed. Note : Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)
Material and labour for preparation of old decorated surfaces of plastic emulsion of walls and applying two coat of anti fungal plastic emulsion paint on walls complete all as specified and directed. Note : Make :-Asian Paints (Brand-Apcolite)/ Berger paint (Brand -Easy Clean) / Nerolac paint (Brand-Beauty Gold)
Material and labour for Preparation of old painted surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for Preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour Preparing newly plastered surfaces of walls any apply three coat of white wash complete.
M/s SUNIL ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .