WELCOME MAINTENANCE AND REPAIR TO CERTAIN B/R WORK IN MD ACCN IN ZONE B AND C AREA UNDER AGE B/R-I UNDER GE (CENTRAL) KHADKI.

Amount

NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.

Material and labour for preparation of old plasterd or unplastered surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed.

Material and labour for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound destemper complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper, including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.

Material and labour for complete removal of existing treatment on Ceiling surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper, including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed.

Material and labour for 3mm thick wall care putty on wall/ceiling complete all as specified and directed

Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint all as specified and directed.

Material and labour for preparation of New wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint any tint over pink primer all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

Material and labour for preparation of New steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint over primer red oxide, zinc crome all as specified and directed.

Material and labour for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE :- (i) filling of cracks, holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat. (iii) height upto 04 storey

Material and labour for preparation of new plastered surfaces of wall surfaces levelling/edging the disturbed places/edges using necessary filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper upto height 10 mtr etc complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia, fins, parapet etc and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of new plastered wall surfaces of any description and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. NOTE :- (i) filling of cracks if any ,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat. (iii) height upto 4 Storey

Material and labour for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint matching with existing colour over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSIAllow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: (Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10 )

Taking down cement plaster on brick wall, stone wall and concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water at any heights by using necessary equipments complete all as specified and directed.

Material and labour for Rendering/plastering 10 mm thick in cement mortar (1:6) on fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed .

Demolition of Brickwork or stone/boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, Modular bricks in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 with water proofing compound finishing even & smooth without using extra cement complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Material and labour for Rendering 10mm thick on concrete surfaces/brick wall in cement mortar 1:3 finishing even and smooth without using extra cement with water profing compound to chhajjas, roof projection, facia,fins,parapet etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork complete all as specified and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Supply only Liquid water proofing compound complete all as specified and as directed.

Clearing & cleaning of plant roots on wall, chajjas & roof not exceeding 10 cm girth complete all as as specified & directed.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutter of any description exceeding 1 Sqm but n. exc 2 Sqm each complete all as specified and as directed.

Taking down shutter of any description but exceeding 2 Sqm each complete all as specified and as directed.

Supply and fix Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and as directed.

Supply and fix Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and as directed.

Supply and fix 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Material and labour for providing cement concrete type B-1 (1:2:4) (using 20mm graded aggregate) as in pressed steel door frame (backfill), complete all as specified and as directed.

Material and labour for providing cement concrete blocks for type C-1 (1:3:6) (using 20mm graded aggregate) as in hold fast, complete all as specified and as directed.

Supply and fix for 35mm thick 2nd class hard wood factory maid plain, framed paneled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm venered partical board with commercial veneering on both side faces. The size of rail and stile as per ISI 1003 (Part-I), kiln seasoned and chemically pressure treated (factory made shutter) complete all as specified and as directed.

Supply and fix for 30mm thick flush shutter, solid core construction, with block board core plywood face panels, commercial type on both sides, chemically treated against termite infestation, complete all as specified and as directed.

Supply and fix 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats as specified in SSR-I, complete all as specified and as directed.

Supply and fix factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame etc complete all as specified and as directed.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed .

Supply and fix aluminium louvered ventilators of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion and adjustable type louvers in another half and stainless steel wire mesh fixed type on out side frame etc., including taking down old unserviceable ventilators and making good the jambs and wall for fixing new window complete all as specified and as directed .

Supply and fix Butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, complete all as specified and as directed.

Supply and fix 140mm size floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, fixed in floor for aluminium/wooden door, complete all as specified and as directed.

Supply and fix in repair Aluminium (Die cast) door closure hydrauically regulated, designation, No-2, universal type suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60Kg and fixed, complete all as specified and as directed.

Supply and fix 180mm size powder coated (any tint) aluminium "American Handle" fixed to aluminium door with suitable screws, complete all as specified and as directed.

Supply and fix in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy 12mm dia, complete all as specified and as directed.

Supply and fix in repair Brass mortice lock vertical type 100mm size, 4 lever fixed in aluminium shutter, complete all as specified and as directed.

Supply and fix Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed.

Supply and fix in repair extruded brass handles, fabricated type polished 150mm long fixing with screws etc complete all as specified and as directed.

Supply and fix in repair for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fix in repair, powder coated door seal fixed with screws to any type of shutter, complete all as specified and as direccted.

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fix in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

Supply and fix plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to aluminium door/window and steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed.

Supply and fix in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed.

Supply and fix in repair brackets brass cromium plated fixed with Harrison rails, anodised aluminium alloy complete all as specified and as directed.

Supply and fix in repair brackets Aluminium anodised fixed with Harrison rails, anodised aluminium alloy complete all as specified and as directed.

Material and labour for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nails around the partical board etc in repair complete all as specified and as directed.

Supply and fix 40mm Width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Supply and fix 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as direccted.

Material and labour for vitrified tiles light shade 10mm thick (square/rectangular) polished area of each tile 600mm x 600mm/605mm x 605mm over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 63 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Description all as per Ser item No 65 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing including dismantiling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Material and labour for Glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.

Material and labour for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall and like laid over and including 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed.

Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concealed including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concealed including taking down old steel tubing etc complete all as specified and as directed.

Supply and fix in repairs for 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor etc complete all as specified and as directed.

Supply and fix for 75mm bore PVC bends, branch piece or similar fitting as reqd to make the system functional complete all as specified and as direced.

Supply and fix for PVC floor trap 75mm complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed on wall etc complete all as specified and as directed.

Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting as required to make the system functional complete all as specified and as directed.

Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.

Material and labour for disconnecting of existing PVC tank of capacity exc 250 Ltr & n. exc 500 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specified and directed. (a) Dewatering & removing all settled silt,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Material and labour for disconnecting of existing PVC tank of capacity exc 500 Ltr & n. exc 1000 Ltrs for cleaning including setting aside temporarily and refixing later in same position for water supply to enable water proofing treatement of roof slab beneath the tank in following laid down process all as specified and directed. (a) Dewatering & removing all settled silt,scale & dust from inside from tanks using coconut brush manually and applying bleaching powder and allowed to rest 1 hour. (b) Cleaning & rinsing the tank using fresh water to wash out complete and allowed to dry for 30 mins. (c) Writing letters of 7 cm height using synthetic enamel paint (white colour) to mention date of cleaning incl rubbing out old letters written over the tank. (d) Re-fixing the tank with fitting as required in same position or raised/lower height after cleaning of water (as may necessary) complete all as specified and as directed.

Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern complete all as specified and as directed.

Supply and fix in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed.

Supply and fix in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specified and as directed.

Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified.

Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed.

Supply and fix in repairs PVC symphon with complete set any type/any size as per site requirement) for low level PVC cistern of 10 Ltr capacity as per sample complete all as specified and as directed.

Supply and fix in repairs for PVC flush pipe/Bend (long/short) for low level PVC flushing cistern 40mm bore etc complete all as specified and as directed.

Supply and fix in repair for 15mm bore stop valve, Cromium plated, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

Supply and fix in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed.

Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repairs for PVC connection 15mm dia and 90 cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.

Supply and fix in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.

Supply and fix in repairs for fancy pillar taps, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Supply and fix in repair Sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and waste ; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x355mm x165mm complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside defence land complete all as specified and as directed.

Material and labour for filling broken brick bats not exc 63mm as in sunken portion including grouting in CM (1:6) complete all as specified and directed.

Material and labour for water proofing treatment to sunken floor with the following course of treatment/ specification: (a) First layer of slurry of cement at the rate of 0.488 kg/sqm mixed with acrylic based polymer, modified cementitous composite compound at the rate 0.253 kg/sqm. This layer will be allowed to air cure for 04 hours. (b) Second layer of slurry of cement at the rate of 0.242 kg/sqm mixed with acrylic based polymer, modified cementitous composite compound at the rate of 0.126 Kg/sqm. This layer will be allowed to air cure for 04 hours followed with water curing for 48 hours. (c) The rate include aration of surface, treatment and sealing of all joints, corners, junctions of pipe and masonry within polymer mixed slurry. (d) This treatment shall be provided after provision of cement plaster mixed with WPC and synthetic fibres while concrete is still green. (e) 200 micron thick polythene film pasted with the help of adhesive shall be provided over above treatment.

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in flooring including finishing the surface complete all as specified and as directed.

Material and labour 50mm thick PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) Finished even & smooth using extra cement complete all as specified and as directed.

Supply and fix in repairs Central hold basin Mixer chromium plated Hot and cold with copper pipe complete all as specified and as directed.

Supply and fix in repair wall mounted pull it aluminium clothes drying system with L angle 31" for 4 pipe system with length of each pipe 5 ft (1.53m). i.e total lenth is 20ft (6.12m) complete all as specified and as directed by Engineer-in-charge. MAKE :- Easy Dry or technocommercially equivalent.

Suraj Sukhdev More (BID ID -3364793)

S M MISHRA (BID ID -3364431)

V.R.PRAJAPATI AND CO. (BID ID -3364344)

MAHESH DADAJI BACHHAV (BID ID -3364877)

Srinivas G Civil Contractor (BID ID -3364325)

M/S KISHAN CONSTRUCTION (BID ID -3364634)

A B S ENTERPRISES (BID ID -3364485)

Shri Sant Cosntruction (BID ID -3364446)