Construction of park with open gym at ward number 5 Mara near goran Mandir Pyt. Marapatti Block Mahanpur

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5 min - All kinds of soil.

Providing and laying in position dry stone aggregate excluding the cost of centring and shuttering. All work upto plinth level with: 40 mm nominal size crusher agg.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade ISI Marked,IS-15658 made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Knee Hip Raise (Chin Ups / Dips / Push Ups): CHIN UPS: Instrumental in building upper body muscles especially that of the back and shoulder. Wide and narrow grips provide for various permulations of popular exercise. DIPS: Soft handgrips for dipping using your own body weight. A very strong and robust exercise fortriceps, shoulders and back muscles. PUSH UPS: Appropriately heighted rolled bars that relieve unneces-sary stress from wrist and forearms. Allows user to dip lower for a more complete arm, chest, shoulder and back workout. Dimensions (LxWxH): 1400 x 1100 x 2100mm. Fabricated with base frame of NB 50mm (G.I.) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I.) ‘C’ Class Pipe. Leg support of NB 32mm (G.I.) ‘C’ Class Pipe and other support of NB 25mm (G.I.) 'C' Class Pipes (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters), All pipes shall be powder coated using Akzo Nobel or equivalent Paint of 80-120 micron thick. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs, Zinc primer paint is applied at all welding points prior to finishing,The equipment is fixed on ground with J shaped welded bolts of 18mm thickness,Once the concrete is set, the equipment is fixed on to it.High tensile steel with galvanized nut bolts shall be used for assembly, Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured.

ELLIPTICAL EXERCISER Providing and fixing of Elliptical exerciser with below specifications: Dimensions (LxWxH): 1200 x 550 x 1600 mm Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make. Main frame of NB 80mm (G.I.) ‘C’ Class Pipe. Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). All Pipes shall be powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. All joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint shall be applied at all the welding points prior to finishing. Handle bars shall be provided with high end quality rubber grips. Base plate of12 mm thickness have cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated shall be used in the equipment manufactured. The equipment shall be fixed on ground with J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts shall be covered with base plate cover. High tensile steel with galvanized nut bolts shall be used for assembly. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury.