Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.5 LAccepted-AOC | L1 | Accepted-AOC AWARDED | |
| 2 | L2₹94.5 L+₹3.0 L (3.26%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹96.8 L+₹5.3 L (5.80%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹97.7 L+₹6.2 L (6.78%)Rejected-Finance VILLAGE TAJIZ KHERA POST OFFICE SAHUWALA II DISTT SIRSA HARYANA 125055 | SIRSA | SIRSA | HARYANA | 125055 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹98.9 L+₹7.4 L (8.06%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹91.2 L
EMD Value
₹1.8 L
Closing Date
8 Jan 2021, 3:00 pmClosed
Executive Engineer
PHE Divn. Mandi Dabwali, Ekta Nagri, Near Anaj Mandi, Dabwali
Providing and Laying of 300mm id RCC Pipe Channel 80 Mtrs., Construction of 1 No. S/S Tank of size 30.5m x30.5m x 3.66 Mtrs., 1 No. High Level Tank of size 10.36m x 6.70m., 1 No. Clear Water Tank of size 7.01m x 4.57m., 2 Nos. RCC filter Bed
2020_HRY_153603_1
SE, PHEC, Sirsa memo No. 11703-04 Dt. 17.12.2020
Open Limited
Civil Works
Works
270 days
EE, PHE Divn., Mandi Dabwali
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹1.8 L
5 Mar 2021
18 Dec 2020
8 Jan 2021
18 Dec 2020
8 Jan 2021
18 Dec 2020
Amount
N.S. Item
Supply & erection of Horizontal spindle split casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squarrel cage induction type motor with 1450 RPM, 3 Phase, 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. (a) Clear Water Pump Set 400 LPM with 25 Mtrs. Head.
(b) Clear Water Pump Set 400 LPM with 40 Mtrs. Head.
Supply and fixing following CI D/F pipe and specials/ bell mouth / including cost of Jointing materials, laying, jointing, refilling including making adequate supports of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of the pump chamber for all the raw water and clear water pumping sets at water works, as per specification given in schedule No. II for For Pumping Machinery (B) D.I. Pipes including cutting, threading & blank flange fitting (ii) 150mm i/d
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For raw water pump sets for 400 LPM x 25 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 400 LPM x 25 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For Clear water pump sets for 400 LPM x 40 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 400 LPM x 40 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.
Providing & fixing of LED outdoor light 100 Watt reputed make with wiring & switch etc. complete in all respects.
Supply erection testing of light fittings including wire in the pump chamber with material upto 10 points including switch button plug PVC conduit pipe & copper wire etc. as per approved specification complete in all respects.
Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable G.I. Sheet of approved make complete in all respects.
Providing & fixing ceiling fan 1400mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in all respects.
Water Works:- Supply & erection of Horizontal spindle split casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squarrel cage induction type motor with 1450 RPM, 3 Phase, 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. (a) Raw Water Pump Set 700 LPM with 12 Mtrs. Head.
(b) Clear Water Pump Set 700 LPM with 40 Mtrs. Head.
Supply and fixing following CI D/F pipe and specials/ bell mouth / including cost of Jointing materials, laying, jointing, refilling including making adequate supports of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of the pump chamber for all the raw water and clear water pumping sets at water works, as per specification given in schedule No. II for For Pumping Machinery (B) D.I. Pipes including cutting, threading & blank flange fitting (ii) 200mm i/d
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For raw water pump sets for 700 LPM x 12 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 700 LPM x 12 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.
Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For clear water pump sets for 700 LPM x 40 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 700 LPM x 40 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.
Providing & fixing of LED outdoor light 100 Watt reputed make with wiring & switch etc. complete in all respects.
Supply erection testing of light fittings including wire in the pump chamber with material upto 10 points including switch button plug PVC conduit pipe & copper wire etc. as per approved specification complete in all respects.
Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable G.I. Sheet of approved make complete in all respects.
Providing & fixing ceiling fan 1400mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in all respects.
Making and fixing of complete floating arm and floating drum fabricated of GI Sheet of 16 Gauge with M.S. Bolts Made of 16 M.S. Flat and CI flange welded on it with collar one side and other side wire base welded to prevent foreign elements to enter Bend with CI Base Plate fixed with CI swill Bend with CI Base plate fixed with anchor bolts in water tank Haudi complete in all respect. 8' i/d floating arm complete in all respect. / 200mm) at storage and sedimentation tank. 150mm
Taking out Top Layer Filter Media from Filter Beds & replacing the same after washing & cleaning.
Taking out Filter Media 2nd layer from Filter Beds & replacing the same after washing & cleaning.
Taking out filter media 3rd, IV & Bottom Layer from filter bed & replacing the same after washing and cleaning.
Drawing out RCC Bed Plates of size 16"x16"x2" from filter bed & placing the same after washing & cleaning.
Providing & fixing GI elbow 15mm complete in all respects.
Providing & fixing GI Nipple 15mm having length 150mm long 1/2"x6" complete in all respects.
Credit for old pumping machinery clear water complete job
Credit for old pumping machinery raw water complete job
Bidder Name
Amount
Lajpat Rai, Contractor(GSTN-06AFTPG5415K1Z6)
Lokesh Kumar, Contractor(GSTN-06AYAPK6590K1Z4)
MOHINDER SINGH SOLANKI(GSTN-NA)
Sant Lal Contractor(GSTN-NA)
VINOD KUMAR KHANNA(GSTN-NA)
VINOD KUMAR KHANNA
MOHINDER SINGH SOLANKI
Sant Lal Contractor
Lokesh Kumar, Contractor
Lokesh Kumar, Contractor
VINOD KUMAR KHANNA
Sant Lal Contractor
Lajpat Rai, Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .