Supply, Installation and Commissioning of Sports equipment at IIM, Sambalpur, Odisha.

7 BOQ Sports IIM

NBCC(India) Ltd.

(A Govt. of India Enterprise)

BOQ for“Supply, Installation & Commissioning of Sports equipment at

IIM, Sambalpur, Odisha”.

Sl No Description

DSR NDSR

Digitally signed by NEELESH

NBCC(India) Ltd.

(A Govt. of India Enterprise)

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

1 SQUASH COURT - Providing, installing & commisioning of Squash cout of following specification- Court

Supply, Dimensions: A standard squash court is approximately 32 feet (9.75 meters) in length, 21 feet

Installation, (6.4 meters) in width, and 15.5 feet (4.72 meters) in height.

Application, Lines and Markings:

Commissioning Service Box: The area where the server stands to serve the ball. It is marked on the front wall

and finishing of and floor.

the squash court Out Line: A line on the front wall that marks the upper boundary of the playable area.

project with all Tin: A metal strip or plate running across the bottom of the front wall. It marks the lower

complete for boundary of the playable area.

SQUASH Court. Service Line: A line on the floor, parallel to the front wall, that divides the service box into two

Half Court Line: A line on the floor that divides the court into two halves, each for one player.

Squash Court Wall Specifications:

Material: Typically constructed using high-density particleboard, plywood, or gypsum board.

Dimensions: The front wall is 21 feet (6.4 meters) wide and 15.5 feet (4.72 meters) tall.

Features: The front wall includes a tin, which is a metal strip or plate located at the bottom 17

inches (432 mm) of the wall.

Material: Similar to the front wall, constructed using high-density particleboard, plywood, or

Dimensions: Side walls are typically 32 feet (9.75 meters) long and 15.5 feet (4.72 meters)

Back Wall (Optional Glass Wall):

Material: Glass panels designed for safety and impact resistance.

Dimensions: The back wall is typically 21 feet (6.4 meters) wide and 15.5 feet (4.72 meters)

tall. Glass panels should be appropriately sized and secured.

Note: The glass wall provides visibility for spectators but should meet safety standards.

Squash Court Floor Specifications:

Material: Sturdy and level subfloor made of concrete, wood, or other suitable materials.

Preparation: Ensure the subfloor is well-leveled, smooth, and free from debris.

2. Vapor Barrier:

Material: Moisture-resistant material, such as plastic sheeting.

Purpose: Prevent moisture from seeping into the playing surface.

Flooring Material-Hardwood Flooring:

- Material: Typically maple or beech wood.

- Thickness: Generally around 21-33 mm.

- Installation: Nail-down or floating installation methods.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

Detailed Specifications for all:

Technical Parameters: The complete wooden flooring should base on Shock Absorption, Vertical

Deformation and Friction for Indoor Surface for multi-sports use according to the requirements

of EN 14904 (06/2006). The Shock Absorption should be between 45% and 50%. The Vertical

Deformation should be between 1.0mm and 1.5mm. The Friction should be between 94 and

A) The Surface Board: Imported Maple Wood surface board finished with 21 mm thick, 50 to

110 mm width and in random length in machined tongue and groove shape on four sides. The

boards will have bottom side with air pass groove.

B) The Under Frame: Made of European Fir/Spruce/Pine wood runners of 70 mm X 45 mm

fixed on the bottom side with 10 mm / 18 mm EPDM thick air-cushioning pads by nails at 350

mm c/c in one direction.

C) The Installation: A vapour barrier will be placed on the leveled IPS sub-floor before laying

the under frame. The runners having air cell cushioning pads will be placed on the vapour

barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to

the runners through the tongue only and will lock the screwed tongue by the groove of the

adjoining boards. The ends of the boards will be locked by inserting the wooden fingers

through the edge grooves and fixed with suitable adhesive. An expansion gap of 6 to 8 mm will Each 1 7,55,624.00 7,55,624.00

be left open between the wooden flooring and the surrounding tiled area/wall.

D) The Finishing: After construction of the floor will be machine sanded in uniform level and

finished with non-skid water based lacquer. Game line marking will be carried out in required

colors before applying the finish coat.

BASE PREPARATION HAS BEEN CONSTRUCTED.

1) The timber used for surface boards shall be as per the approval of the Institute.

2) The surface board will be free from bee or borer holes splits, cracks and fungal attack.

3) All timber will be kiln seasoned with moisture content of approximately 14 %. and

dimensions will have a tolerance of ± 1mm

SPECIFICATION FOR HARD PLASTER SYSTEM TO THE WALLS OF SQUASH COURT: -

Supply and application of cement based Hard Plaster system confirming the requirement of

WSF (World Squash Federation) consisting of a Base Coat and a Finish Coat of a total thickness

of approx. 15 mm (Base coat 12mm Need to be done Cemented or Silica Plaster, should be

provide from client and top coat hard plaster 3-4mm) and coated with washable paint system.

Thickness – 3-4mm for Hard Plaster and Base coat 12mm

Due to the extremely hard nature of the plaster a slight uneven color distribution and micro

porous surface checks may be seen once the plaster has dried. This does not affect the

strength or the integrity of the plaster and is not to be considered as a defect.

WALLS: The dimensions of the court are 9750 X 6400 mm between plaster face:

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

You will provide us with walls in proper plumb, level and at right angles. In order to bring the

court to the required dimensions the walls should provide for a plaster thickness of app. 15 mm

AREA: One front wall and two sidewalls, playing area only below red lines as per the standard

dimensions of the WSF standard of Court.

SPECIFICATION FOR GLASS BACK WALL:

Supply and Installation, fixture and fitting of free standing glass back wall system made of 12

mm and 2130mm height toughened glass back wall with four panels, one door, locks, four full

height glass support fines, and all fixtures & fittings and all material required for erecting the

glass wall with all complete.

Skilled team trained under the official installers of international squash tournament will erect

the glass wall completely with panels, fins, door lock etc. and finished with suitable sealant.

Supply and installation of 6400 mm width X 480 mm height with wall mounting thickness of 25

mm sound Board made out of powder coated galvanized sheet of 18 gauge thickness, fixed

with wooden frame work and fitting etc., all complete for Squash Courts.

Squash Court Paint: Paint should be done for Squash Court as per the WSF standards of area

1065 SQFT or more.

Floor Markings:

Game Line Marking will be carried out in Red Colour as per WSF Standards. (We may choose

the color based on the requirements of Institute) for Service box, center line, half-court line,

out line, and tin area.

1) Wooden Sports Flooring System of Squash Court - 5 years

2) Hard Plaster system to the walls of Squash Court - 2 years

3) Squash Glass Hardware – 2 year

The complete work for Supply, Installation, Fittings and Commissioning should be included in

the quoted amount. No extra payment shall be made for Scaffolding, Transportation etc.

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

2 Table Tennis Providing, installing & commisioning of Table Tennis Table of following specification- Standard

Table: table tennis tables, also known as ping pong tables, have specific technical specifications that

are regulated by international organizations like the International Table Tennis Federation

(ITTF) Certifications and Approved by ITTF. Here are some of the key technical specifications

for a standard table tennis table:

Length: 274 cm (9 feet)

Width: 152.5 cm (5 feet)

Height: 76 cm (2 feet 6 inches)

Package Includes - 1 TT Table (1 Clamp Net Set. 1 Table Top Cover, 2 Stag rackets and 6 stag

The playing surface of the table must be rectangular and made of a smooth, low-reflectance

material (usually wood or wood-based material).

The playing surface is divided into two halves by a net that is suspended across the width of

The net is suspended 15.25 cm (6 inches) above the playing surface.

The net is 15.25 cm (6 inches) high and extends over the entire width of the table, 183 cm (6

Table Thickness:

The playing surface should have a minimum thickness of 25 mm. Each 3 45,000.00 1,35,000.00

The playing surface must have a dark color, usually green or blue, and it must have clearly

visible white lines marking the boundary and the centerline.

Edge and Side Lines:

The table has edge lines along its length, which are used to determine the in-bounds area.

The table also has side lines along its width, which help determine the in-bounds area for the

Sides and Ends:

The sides and ends of the table are considered part of the playing surface.

The table must be supported by four legs, one at each corner, made of a sturdy material.

Should have 4 wheels with locks, 4 without locks. Wheel Size - 100 mm. Should have heavy

duty adjustable nylon shoes on the leg bottom.

The ball must bounce at least 23 cm (9 inches) when dropped from a height of 30.5 cm (12

inches) above the table.

Coating and Finish:

The playing surface should have a uniform coating that provides a consistent bounce and

playing experience. UNIFORM CONSISTENT SURFACE: Paint DuPont Polyurethane Anti-Glare.

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

3 Table Tennis Bat Providing, installing & commisioning of Table Tennis Bat of following specification- Make -

The blade of the table tennis bat is typically made of wood. It can be composed of multiple

layers of wood or a combination of wood and other materials such as carbon fiber.

The blade must be flat and rigid, with a minimum of 85% natural wood (for most competition

The thickness and size of the blade can vary, but it must conform to ITTF regulations.

Each side of the table tennis bat must be covered with a layer of rubber.

The rubber can be pimpled (with outward-facing pimples, known as pips) or smooth (with

inward-facing pimples). The rubber must be ITTF-approved and adhere to their specifications

regarding thickness and characteristics. The rubber can have different levels of grip, sponge

thickness, and hardness, allowing players to choose a style that suits their playing style.

The rubber layer on the blade is often attached to a sponge layer, which provides varying

degrees of speed and spin.

The thickness of the sponge can vary, but it must adhere to ITTF regulations. Each 5 1,000.00 5,000.00

Color: The color of the rubber on one side of the bat must be black, and the color on the other

side must be red.

The overall dimensions of the table tennis bat are regulated by the ITTF.

The blade must be rectangular with a maximum length of 6.77 inches (17.2 cm) and a

maximum width of 6.3 inches (16 cm). The total thickness of the blade and rubber together

must not exceed 0.866 inches (2.2 cm).

The weight of the table tennis bat is not explicitly regulated by the ITTF, but it must be

reasonable and not provide an unfair advantage to the player.

Other Considerations:

Some players may choose to use specialized edge tape to protect the edges of the bat and

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

4 Providing, installing & commisioning of Table Tennis Net of following specification- Net

TABLE TENNIS Material: The net is usually made from a fine mesh fabric, commonly polyester or nylon, to

NET ensure that the ball doesn't get caught in the net.

Net Dimensions: The net should be 6 feet (1.83 meters) long, spanning the width of the table,

and it should be positioned in the center of the table's width.

Net Height: The net's height should be 6 inches (15.25 centimeters) above the playing surface

of the table. This is measured from the top of the table to the bottom of the net.

Net Attachment: The net should be attached to the posts securely and should not sag in the

middle. The posts are typically made of metal or plastic and are designed to clip onto the

Post Height: The posts that hold the net should be tall enough to achieve the proper net

height. They should be designed to securely fasten to the table's surface without wobbling or

falling off during play.

Adjustability: Some table tennis nets come with adjustable posts, allowing players to fine-tune

the net's tension and height.

Color: The net is usually dark in color (often black) to provide contrast against the white table

and ball, making it easier for players to see the net during fast-paced matches.

Durability: The net material and attachment mechanisms should be durable enough to

withstand regular use and potential contact with the ball.The work should be completed as per

direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

5 TABLE TENNIS Providing, installing & commisioning of Table Tennis Ball of following specification- Table tennis

BALL balls have specific technical specifications outlined by the International Table Tennis Federation

(ITTF) to ensure consistent performance and fair play. As of my last knowledge update in

September 2021, here are the general technical specifications for table tennis balls:

Size: The ball must have a diameter of 40mm (1.57 inches).

Weight: The ball must weigh 2.7 grams (0.095 ounces).

Material: The ball is typically made of celluloid or a similar plastic material. The ITTF had plans

to transition to non-celluloid materials due to safety and environmental concerns, so there

might have been updates in the material requirements since then.

Color: The ball can be white or orange. The color must be uniform and matte, without any

Bounce: The ball's bounce must be consistent. When dropped from a height of 30.5 cm (12

inches) onto a standard steel block, the ball should bounce to a height of approximately 23 cm

Roundness and Symmetry: The ball must be perfectly spherical and symmetrical.

Approval: Balls used in official competitions must bear the ITTF logo or approval stamp,

indicating that they meet the required specifications. The work should be completed as per

direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

6 Billiards Table Providing, installing & commisioning of Billiards Table of following specification- A standard

billiards table, also known as a pool table, has specific technical specifications that are widely

recognized and used in various billiards organizations and leagues. The most common size for

a standard pool table is the 9-foot table, which is commonly used for professional and

competitive play. However, there are also other sizes available for recreational and smaller

spaces. Here are the technical specifications for a standard 9-foot billiards table:

Standard 9-Feet Billiards Table Specifications:

Playing Surface Dimensions: The playing surface of a standard 9-foot billiards table measures

approximately 100 inches (254 cm) in length by 50 inches (127 cm) in width.

Rail Height: The top of the rail (cushion) should measure around 63.5% of the diameter of the

cue ball. This ensures consistent and accurate ball rebound angles.

Pocket Openings: The openings (pockets) on a standard 9-foot billiards table should have a

width that ranges between 4.5 inches (11.43 cm) and 4.625 inches (11.75 cm). The corners

typically have larger pockets, while the side pockets are slightly smaller.

Pocket Angle: The angle of the pocket cut is typically around 142° - 145°, measured from the

cushion to the center of the pocket.

Rail Cushions: The rail cushions are typically made of a rubber material and are required to

have a specific profile shape to ensure consistent ball rebound angles.

Cloth: The playing surface of the table is covered with a specialized billiards cloth. The cloth

should be tightly stretched and properly adhered to the slate playing surface. The most

common colors for the cloth are green and blue.

Slate Thickness: The playing surface of a standard pool table is typically made of three pieces

of slate. The slate should have a thickness of around 1 inch (2.54 cm) to 1.25 inches (3.175

Table Frame: The table frame supports the slate and playing surface. It is constructed to

provide stability and ensure the proper level of the playing surface.

Table Dimensions: The overall dimensions of a standard 9-foot billiards table can vary, but a

common size is approximately 9 feet (2.74 meters) in length by 4.5 feet (1.37 meters) in

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

7 CUE STICK FOR Providing, installing & commisioning of Cue stick for Billiards of following specification- A cue

BILLIARDS stick, also known as a pool cue or billiards cue, is an essential tool used in cue sports like pool,

billiards, and snooker. While there can be variations in design and materials, here are some

common specifications and features of a cue stick:

Length: Cue sticks typically range from 57 to 59 inches (145 to 150 cm) in length. The length

affects the player's reach and stroke control.

Weight: Cue sticks can vary in weight, usually ranging from 18 to 21 ounces (510 to 595

grams). The weight influences the power and finesse of shots.

Tip: The tip of the cue stick is usually made of leather and comes in various diameters,

commonly between 11 to 14 millimeters. Smaller tips offer more precision, while larger tips

provide better cue ball control.

Ferrule: The ferrule is the white collar just below the tip. It's usually made of materials like

fiber or ivory. The ferrule's purpose is to protect the cue shaft and enhance the energy transfer

between the tip and the cue ball.

Shaft: The shaft of a cue stick is typically made from hardwood, often maple. It's important for

the shaft to be straight and smooth to ensure accurate shots. Some shafts have varying levels

Joint: The joint is the point where the cue stick's shaft and butt come together. There are

various types of joints, such as the 5/16x18, 3/8x10, and Uni-Loc, which affect how the cue

breaks down for transport and the feel of the hit.

Wrap: The wrap is the grip section of the cue stick. It can be made from materials like leather,

linen, or rubber. Wraps provide a comfortable and secure grip for the player.

Butt Design: The butt of the cue stick comes in various designs and can include inlays,

engravings, and other decorative elements. Some cues also have adjustable weights in the butt

to allow players to fine-tune the balance.

Balance Point: The balance point of a cue stick refers to where it naturally balances when

placed horizontally on a finger. Different balance points can affect the cue's feel and balance

Material and Construction: Cue sticks can be made from various materials, including wood,

fiberglass, and carbon fiber. High-quality cues often feature layered construction for improved

stability and performance.The work should be completed as per direction of Engineer Incharge

in all respect.

8 BILLARDS BALL Providing, installing & commisioning of Billiards Ball & Equipments of following specification-

AND Billiards Balls Specifications (Standard Pool Balls):

EQUIPMENTS Size: Standard pool balls are typically 2.25 inches (57.15 mm) in diameter. This size is used

for both American pool (such as eight-ball and nine-ball) and British pool (such as blackball and

Material: Pool balls are traditionally made from phenolic resin or polyester. High-quality balls

are made from a high-grade phenolic resin that provides durability, consistency, and a smooth

Colors and Numbers: A standard set of pool balls includes 15 numbered object balls (1 to 15)

and a white cue ball (also known as the cue ball). The object balls are usually solid-colored,

with balls 1 to 7 being solids and balls 9 to 15 being stripes. The cue ball is typically white.

Weight: Pool balls are generally standardized to have a weight of around 5.5 to 6 ounces (156

Billiards Tools Specifications:

Cue Stick: The cue stick, or simply "cue," is used to strike the cue ball and move the object

balls around the table. Cue sticks vary in length, usually between 57 to 59 inches (145 to 150

cm). They are made from various materials, such as wood (maple is common), fiberglass, or

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

Pool Table: Billiards tables come in different sizes, with the most common being 7-foot, 8-foot,

and 9-foot tables. The dimensions and specifications of a pool table include the playing surface,

cushions, and pockets. The cloth covering the playing surface is typically made from a wool and

Rack: The rack is used to arrange the pool balls in a triangle formation at the beginning of a

game. The triangle rack is usually made of plastic or wood and is available in various sizes to

accommodate different game variations.

Bridge Stick: The bridge stick (or simply "bridge") is a tool used to support the cue when the

player's hand cannot comfortably reach the desired position. It consists of a handle and a

mechanical or sliding bridge head.

Chalk: Chalk is applied to the cue tip to improve friction and enhance ball control. High-quality

cue chalk is usually made of fine abrasive materials mixed with a binder.Brushes and Cleaners:

Brushes and cleaners are used to maintain the pool table's cloth and keep it free from dust and

debris. Soft brushes and specialized pool table cleaners are commonly used.

Cue Tip Shaper/Scuffer: This tool is used to reshape and scuff the cue tip, helping maintain

optimal contact between the cue tip and the cue ball. The work should be completed as per

direction of Engineer Incharge in all respect.

9 BADMINTON Providing, installing & commisioning of Badminton Racket of following specification-

RACKET The standard specifications for a badminton racket are not rigidly defined but there are general

guidelines that manufacturers and players often follow. Here's an overview of the standard size

and specifications for a badminton racket:

Length: The overall length of a standard badminton racket is typically around 26.77 inches (68

cm) to 27.17 inches (69 cm). This includes both the head and the handle.

Head Shape: The most common head shape is isometric, which has a square or slightly

rectangular shape. This design provides a larger sweet spot and better forgiveness for off-

Balance: The balance of a standard badminton racket can vary, but many rackets are designed

to have a slightly head-light balance. This balance provides a good combination of power and

Flexibility: Standard rackets often have a medium flex. This means the shaft has a moderate

level of flexibility, offering a balance between power and control. Each 10 3,000.00 30,000.00

Weight: Standard badminton rackets typically weigh between 80 grams to 100 grams

(unstrung). The weight can vary based on the materials used and the design of the racket.

String Tension: String tension for a standard badminton racket usually falls within the range of

20 lbs to 30 lbs. However, players may choose different tensions based on their preferences

and playing style.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

Standard rackets are often made from materials like graphite, carbon fiber, and other

composites, which provide a good balance of strength, stiffness, and weight.

String Pattern: The string pattern can vary, but a common pattern is around 22 main strings

and 22 cross strings. The string pattern affects the playability and feel of the racket.

Shaft Length: The length of the racket's shaft is usually around 10.5 to 11 inches, contributing

to the overall balance and feel of the racket. The work should be completed in all respect as

per direction of Engineer Incharge.

10 SHUTTLECOCKS Providing, installing & commisioning of Shuttlecocks of following specification- Badminton

shuttlecocks, commonly referred to as "shuttles," have specific technical specifications that

govern their design and performance in the sport of badminton. The two main types of

shuttlecocks are feathered and synthetic. Here are the technical specifications for each type:

Feathered Shuttlecock:

Materials: Feathered shuttlecocks are typically made from the feathers of ducks or geese. The

feathers used are typically goose feathers, which are selected for their durability and

Speed Categories: Feathered shuttlecocks are categorized into different speed classes: slow,

medium, and fast. These categories indicate the shuttlecock's flight characteristics and are

usually denoted by different color codes on the cork.

Cork Base: The base of a feathered shuttlecock is made from natural cork. The cork is typically

covered with a thin layer of leather or a synthetic material.

Feather Arrangement: A feathered shuttlecock has 16 feathers arranged in a circular pattern

around the cork base. The feathers are evenly distributed to ensure stability and balance

Weight: A regulation feathered shuttlecock typically weighs between 4.74 to 5.50 grams.

Synthetic Shuttlecock:

Materials: Synthetic shuttlecocks are made from materials such as nylon or other synthetic each 50 100.00 5,000.00

polymers. These shuttlecocks are designed to be more durable and consistent than feathered

Skirt Design: The skirt of a synthetic shuttlecock is typically made of several layers of synthetic

material, which are engineered to replicate the flight characteristics of feathered shuttlecocks.

Speed Categories: Like feathered shuttlecocks, synthetic shuttlecocks are also categorized into

different speed classes: slow, medium, and fast. These categories help players choose

shuttlecocks that match their playing style and court conditions.

Weight: A regulation synthetic shuttlecock typically weighs between 4.74 to 5.50 grams,

similar to a feathered shuttlecock.

It's important to note that the specific technical specifications for shuttlecocks can vary based

on international badminton governing bodies (such as the Badminton World Federation) and

local regulations. These specifications ensure a consistent and fair playing experience for all

players, regardless of skill level or location. The work should be completed as per direction of

Engineer Incharge in all respect

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

11 BADMINTON NET Providing, installing & commisioning of Badminton Net of following specification- Badminton

Material: The net is usually made from nylon or other durable synthetic materials.

Color: The standard net color is usually dark (usually black) mesh with a white or contrasting

Dimensions: The net should measure 20 feet (6.1 meters) in width and 2.5 feet (0.76 meters)

in depth. The net is divided into two equal halves by a centerline.

Mesh Size: The mesh size of the net should be small enough to prevent the shuttlecock from Each 10 5,000.00 50,000.00

passing through while allowing good visibility.

Border Tape: The top of the net should have a white or contrasting border tape that is

approximately 75 mm (3 inches) wide.

Height: The net should be suspended at a height of 5 feet (1.524 meters) at the center. The

work should be completed as per direction of Engineer Incharge in all respect.

12 BADMINTON Providing, installing & commisioning of Badminton Pillars of following specification- Materials:

PILLARS Metal: Badminton poles are commonly made of metal, such as steel or aluminum. These

materials provide the necessary strength and durability required for the game.

Aluminum: Aluminum is a popular choice due to its lightweight nature, corrosion resistance,

and ease of transportation.

Specifications:

Height: The badminton poles should be 1.55 meters (5 feet 1 inch) in height from the ground

to the top of the pole. This height is measured from the playing surface (the floor) to the top of

Width: The distance between the inner edges of the two badminton poles should be 6.1 meters

(20 feet). This measurement determines the width of the badminton court.

Pole Diameter: The diameter of the badminton poles is typically around 40 millimeters (1.57 PAIR 4 21,000.00 84,000.00

inches). This size ensures stability and support for the net.

Net Attachment: The top of the poles should have a mechanism or attachment point for

securing the badminton net. This is usually a hook or a clamp that holds the net securely in

place at the correct height.

Ground Fixing: The bottom of the badminton poles should be designed for secure anchoring to

the ground. This can be accomplished using various methods, such as stakes, bases, or sleeves

set in concrete.

Color: Badminton poles are often painted in a contrasting color to the net and court

boundaries, making them easily visible to players and officials. Common colors include white or

Weight: While there is no specific weight requirement for badminton poles, they should be

sturdy enough to withstand wind and player contact without falling over. This often means that

they are relatively heavy.

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

13 SQUASH Providing, installing & commisioning of Squash Rackets of following specification- Squash

RACKETS rackets are an essential piece of equipment for playing squash, a fast-paced racquet sport.

Here are some key specifications and features to consider when looking for a squash racket:

Weight: Squash rackets typically range in weight from 110 grams to 190 grams. The weight

affects the racket's maneuverability and power. Heavier rackets can generate more power but

might be harder to control, while lighter rackets offer better control and quick maneuverability.

Balance: Rackets can be categorized as head-heavy, head-light, or balanced. Head-heavy

rackets provide more power, especially for players with a shorter swing. Head-light rackets

offer better control and are favored by players with a longer, more controlled swing.

Head Size: Squash rackets come in various head sizes, usually measured in square centimeters Each 10 4,000.00 40,000.00

(cm²). Larger head sizes provide a larger sweet spot, which can be forgiving for off-center hits,

while smaller head sizes offer better control.

String Pattern: The string pattern refers to the number of main and cross strings on the racket.

A more open string pattern (e.g., 14x18) can provide more power and spin, while a denser

pattern (e.g., 16x19) offers more control.

Grip Size: Grip size is important for comfort and control. Players with smaller hands might

prefer a smaller grip, while those with larger hands might opt for a larger grip size. A

comfortable grip can help prevent injuries and improve performance.

Material and Construction: Squash rackets are typically made from materials like graphite,

carbon fiber, or composite materials. High-quality materials can enhance the racket's

durability, power, and control.

Stiffness/Flex: The stiffness or flexibility of a racket affects the feel and power of your shots. A

stiffer racket provides more power but can be less forgiving on off-center hits. A more flexible

racket offers better control but may sacrifice some power.

Length: Squash rackets are usually around 27 inches (68.6 cm) in length. Unlike in tennis,

where racket length can vary, squash racket lengths are fairly standardized.

Brand and Model: Different brands offer a variety of racket models with unique features. Some

popular squash racket brands include Head, Tecnifibre, Dunlop, Prince, and Wilson, among

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

14 SQUASH BALL Providing, installing & commisioning of Squash ball of following specification- Squash balls are

standardized based on their size, weight, and bounce characteristics. The World Squash

Federation (WSF) sets the specifications for squash balls. As of my last knowledge update in

September 2021, here are the technical specifications for squash balls:

Size: Squash balls are small and have a specific diameter. The standard size for a squash ball

is approximately 40 mm (1.57 inches) in diameter.

Weight: Squash balls are categorized by their weight, which is measured in grams. The weight

of a squash ball varies based on its type or "dot" marking, indicating its level of play:

Single Yellow Dot: Approximately 24 grams

Red Dot: Approximately 39-41 grams

Blue Dot: Approximately 41-44 grams

Bounce Characteristics: Squash balls are also categorized based on their bounce

characteristics, which is closely related to their level of play and compression. The compression

of a squash ball affects its bounce. The higher the compression, the lower the bounce.

Single Yellow Dot: Very low bounce, highest compression

Double Yellow Dot: Low bounce, high compression

Red Dot: Moderate bounce, medium compression

Blue Dot: Higher bounce than red dot, lower compression

The work should be completed as per direction of Engineer Incharge in all respect.

15 VOLLEYBALL NET Providing, installing & commisioning of Volleyball net of following specification- Height: The top

of the net should be positioned at a specific height above the center of the playing court.

Indoor Volleyball: The top of the net should be 2.43 meters (7 feet 11 5/8 inches) for men and

2.24 meters (7 feet 4 1/4 inches) for women.

Beach Volleyball: The top of the net should be 2.43 meters (7 feet 11 5/8 inches) for both men

Width: The width of the net should be the same as the width of the court, which is typically 9

meters (29 feet 6 1/2 inches) for indoor volleyball and 8 meters (26 feet 3 inches) for beach

Mesh Size: The mesh of the net should be made of a fine, durable material that prevents the

ball from passing through. The exact specifications for mesh size may vary, but it's generally a

small, square pattern.

Tension: The net should be tensioned properly to ensure it remains at the correct height and

does not sag excessively.The work should be completed as per direction of Engineer Incharge

in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

16 VOLLEYBALL Providing, installing & commisioning of Volley Ball Pillarse of following specification- Materials:

PILLARS Metal: Volleyball posts are typically made of metal, such as steel or aluminum, to provide the

necessary strength and stability.

Specifications:

Height: The official height of the volleyball net, measured from the center of the court, is 2.43

meters (7 feet 11 5/8 inches) for men's volleyball and 2.24 meters (7 feet 4 1/4 inches) for

women's volleyball.

Width: The distance between the inner edges of the two volleyball posts should be 9.15 meters

Post Diameter: The diameter of the volleyball posts is typically around 8 centimeters (3 inches)

to ensure stability.

Net Attachment: The volleyball posts have mechanisms or attachment points at the top to

secure the net at the correct height. These attachment points often include a hook and PAIR 3 21,000.00 63,000.00

tensioning device to maintain proper net tension.

Antennas: Antennas are usually attached to the top of the volleyball posts to establish the

boundaries of the playing area. The antennas extend vertically from the net and are used to

determine whether a ball is in or out of bounds.

Base Support: The bottom of the volleyball posts may be designed with a baseplate that can be

secured to the ground using anchors or weights for stability. In some cases, especially for

portable or beach volleyball setups, the posts may have a support system that digs into the

Padding: For safety reasons, some volleyball posts may have padding or covers to protect

players from accidentally colliding with the posts during play.

The work should be completed as per direction of Engineer Incharge in all respect.

17 VOLLEYBALL Providing, installing & commisioning of Volleyballof following specification- The standard

specifications for a volleyball, including its size, weight, and material, are established by

international organizations like the Fédération Internationale de Volleyball (FIVB) and national

sports governing bodies. Here are the general standard specifications for a volleyball:

Size: The standard diameter of a volleyball is approximately 21-21.65 cm (8.3-8.5 inches).

Weight: The standard weight of a volleyball is approximately 260-280 grams (9.2-9.9 ounces).

Material: Volleyballs are typically made of leather or synthetic leather. Synthetic materials are

commonly used due to their durability and consistent performance characteristics. Each 7 2,500.00 17,500.00

Panels: Volleyballs typically consist of 18 rectangular panels, divided into six identical sections.

Color: Volleyballs are traditionally white or a combination of contrasting colors for better

visibility during play.

Pressure: Volleyballs are inflated to a standard pressure of 0.30-0.325 kg/cm² (4.26-4.61 psi).

Surface Texture: The surface of the ball may have a dimpled or textured pattern to improve

grip and control. The work should be completed as per direction of Engineer Incharge in all

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

18 LAWN TENNIS Providing, installing & commisioning of Lawn Tennis Racket of following specification- Length:

RACKET The standard length of a tennis racket is a maximum of 29 inches (73.66 cm).

Width: The width of the racket, measured across the head, must not exceed 12.5 inches

Head Size: The head of the racket (the stringed area) is typically measured in square inches or

square centimeters. The maximum head size allowed by the ITF is 115 square inches (741.94

Weight: The weight of a tennis racket is usually measured in ounces or grams. There is no

specific weight restriction, but most rackets fall within the range of 9 to 12.5 ounces (255 to

355 grams). The weight can affect a player's swing speed, power, and control.

Balance: The balance point of a racket refers to its distribution of weight. Rackets can be

classified as head-heavy, head-light, or balanced. This balance point affects how the racket

feels during play. There is no strict specification for balance, but different players may prefer Each 6 8,000.00 48,000.00

different balance points.

String Pattern: Rackets come with various string patterns, typically denoted as something like

"16x19" or "18x20." This indicates the number of main (vertical) and cross (horizontal) strings.

A denser string pattern generally provides more control, while an open pattern offers more

power and spin potential.

Grip Size: Grip size refers to the circumference of the handle. Players should choose a grip size

that allows them to comfortably hold the racket without straining their hand. Grip sizes are

usually denoted in whole or fractional numbers, such as 4, 4 1/4, 4 3/8, etc.

Material and Construction: Rackets are commonly made from graphite composites, carbon

fiber, or other advanced materials. The choice of material and construction can impact a

racket's stiffness, power, and feel. The work should be completed as per direction of Engineer

Incharge in all respect.

19 LAWN TENNIS Providing, installing & commisioning of Lawn Tennish Ball of following specification- Diameter:

BALL The standard diameter of a tennis ball is approximately 2.7 inches (6.86 cm).

Weight: A standard tennis ball should weigh between 2.57 to 2.63 ounces (about 57.7 to 59.4

Bounce: When dropped from a height of 100 inches (approximately 254 cm), a standard tennis

ball should bounce to a height between 53 to 58 inches (135 to 147 cm).

Pressure: Tennis balls are typically pressurized, which affects their bounce and playability. A

standard tennis ball should have an internal pressure of 12 to 16 psi (pounds per square inch).

Felt Cover: Tennis balls have a felt cover made of wool or a wool/nylon blend. The felt cover

provides grip, enhances spin, and helps regulate the ball's flight. The felt should be uniform, in

good condition, and free from cuts or nicks.

Color: The standard color of a tennis ball is bright yellow. However, white tennis balls are also

used for certain tournaments and events.

Durability: Tennis balls are expected to maintain their characteristics for a certain period of

play. The ITF has specific regulations regarding the durability and performance of tennis balls.

The work should be completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

20 LAWN TENNIS Providing, installing & commisioning of Lawn Tennish Net of following specification-

NET Dimensions:

Height: The net's height at the center should be 3 feet (0.914 meters) for singles play and 3

feet 6 inches (1.07 meters) for doubles play.

Width: The standard width of a tennis net is 42 feet (12.8 meters) for a singles court and 36

feet (10.97 meters) for a doubles court.

Mesh Size: The mesh size of the net should be such that a 2.5-inch (6.35 cm) ball cannot pass

2. Net Material:

Tennis nets are typically made from a durable, weather-resistant material. The most common

material used is polyester or polyethylene, which is coated with UV-resistant coatings to

withstand outdoor conditions.

3. Mesh Material:

The mesh portion of the net is often made from braided nylon or polyester. The mesh material

must be strong enough to withstand the impact of tennis balls and player contact.

4. Net Headband:

The top of the net features a headband, which is a reinforced section designed to provide

stability and prevent sagging. It is usually made from a stronger material than the rest of the

The top cable runs through the headband and is used to suspend the net. It's typically made of

steel or a high-strength synthetic material like Kevlar.

6. Net Posts and Center Strap:

While not part of the net itself, the net posts and center strap are essential components of the

tennis net setup. The net is attached to these posts, and the center strap helps maintain the

proper net tension. The net posts are usually made of steel or aluminum.

7. Tensioning System:

A tensioning system, often consisting of a winch or ratchet mechanism, is used to adjust and

maintain the proper tension of the net. This ensures that the net is taut and at the correct

The standard color for tennis nets is black or dark green. This provides good visibility for

players and spectators. The work should be completed as per direction of Engineer Incharge in

Digitally signed by NEELESH

BOQ for“Supply, Installation & Commissioning of Sports Equpiment at IIM, Sambalpur, Odisha”.

IMAGE UNIT QTY

21 LAWN TENNIS Providing, installing & commisioning of Lawn Tennis Pole of following specification- Material:

POLE Tennis poles are commonly made from durable materials like steel or aluminum. These

materials are chosen for their strength and resistance to corrosion, as tennis poles are usually

placed outdoors.

The diameter of the pole can vary but is typically around 3 inches (7.62 cm) for steel and

aluminum poles. The diameter can affect the stability and strength of the pole.

Tennis poles are usually 3 feet (0.91 meters) longer than the width of the court. For a standard

singles court, which is 27 feet (8.23 meters) wide, the poles would typically be around 30 feet

(9.14 meters) long.

The weight of the pole is important for stability. A heavier pole can withstand wind and other

external factors better. Typical weights range from 50 to 70 pounds (22.68 to 31.75 kg) per

Tennis poles are often coated with a weather-resistant finish, such as powder coating or

galvanization, to protect them from the elements and prevent rust.

6. Net Attachment:

Tennis poles should have a mechanism for attaching the tennis net securely. This often

includes hooks or clips that hold the net in place and allow for easy adjustment of net tension.

7. Ground Sleeve:

Many tennis poles come with ground sleeves. These are tubes that are installed in the ground

to hold the poles securely. They allow for easy removal of the poles when the tennis court is

8. Height Adjustment:Some tennis poles have a mechanism for adjusting the height of the net.

This is especially useful for ensuring the net is set at the correct height, which is 3 feet (0.91

meters) at the center and 3 feet 6 inches (1.07 meters) at the posts. The work should be

completed as per direction of Engineer Incharge in all respect.

Digitally signed by NEELESH