Construction of 1LLPD capacity Dairy at Thiruvarur.

Amount

Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excabvated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications. From 0.0m to 2.00 m Depth

From 2.00m to 3.00 m Depth

Open excavation

Supply and filling with M sand for foundation and basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.

Supplying and filling with conveyed Gravel from approved source of supply with a lead of 0 to 50 km for foundation and basement to required thickness and in layers on not more than 30 cm thick, watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications.

Plain Cement Concrete 1:5:10 using 40 mm size HBG stones for foundation including de-watering if found necessary and laid in layers of not more than 15 cm thick for flooring including rendering the top surface rough to take floor finish including side shuttering if required and compaction ,curing etc., complete as directed by the Federation officers and as per the technical Specifications

Supplying, erecting steel centering using M.S. Sheet of size 90X60cm and BG 10 gauge stiffened welded with M.S. angel of size 25X25X3mm laid over silver osk/country wood joist of size 10X6.5cm spaced at about 90cm centre to centre and supported by casurinaprops of 10 to 13cm dia spaced at 75cm center to centre for all type of RCC roof slab, lintel beam,T,L,beam landing slab plinth beam, grade beam, column footing, column , sunshade, facia, sloped roof, waist slab, etc., Including necessary supports with all cross bracings filling slits and holes in the surfaces(the retrieved materials should be taken back by the contractor) and side shuttering etc., complete as directed by the Federation officers and as per standard specification. Upto Basement Column Surface

From Basement to 3.30 m Column Surface

From 3.30 m to 4.30 m Column Surface

Upto Basement Plain Surface

From Basement to 3.30 m Plain Surface

From 3.30 m to 4.30 m Plain Surface

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification. Upto Basement

Above Basement upto 4.50 m Height

Reinforced Cement Concrete 1:2:4 (One Cement, Two M sand and Four hard broken stone jelly) using 20 mm gauge machine crushed hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. complete complying with standard specification and as directed by the departmental officers. Upto Basement

Supply, fabricating and placing in position of reinforcement grills for all RCC works including cost of steel rods, binding wires, labour for bending, cutting and tying etc., complete as as directed by the federation officers and as per standard specifications.

Brick work in CM 1:5 (one cement & five M sand) using II class ground moulded bricks of size 9"X4½"X3" including finishing, curing, etc., complete complying with standard specification Building works. Upto Basement

Above Basement upto 4.50 m Height

From 4.50 m to 9.00 m Height

Brick partition walls of 11.15 cm thickness using best quality country bricks of size complying in Cement Mortar 1:3 (One Cement and Three M Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid separately). Ground Floor

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five M sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. (Inner Plastering)

Plastering the surface of walls with Cement Mortar 1:3 (One cement and Five sand), 12 mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete as directed by the departmental officials.

Manufacturing supplying and fixing of Aluminium glazed door with standard specification ,standard section with door shutter partlly pre laminated bioard, plain glass with furniture fittings finishing etc. complete.

Manufacturing supplying and fixing of Aluminium glazed window slidding type with standard specification ,standard section , plain glass with furniture fittings finishing etc. complete.

Manufacturing supplying and fixing of Aluminium glazed ventilator with standard specification ,standard section , plain glass with furniture fittings finishing etc. complete.

Supply & fixing of steel rolling shutter ( Pull and push type with ISI monogram ) of approved quality with MS laths 75mm wide and 18 gauge thick to different sizes including all accessories like sliding grooves, shafts, spring, bearings, hood & locking arrangements and grouting the sides & top assembly with walls & beams, one coat of red oxide primer etc., complete as directed by the federation officers. and as per standard specifications

supplying and fixing 20 mm thick granite stone slab with base cement mortar 1:3 30mm thick, cement grouting and pointing etc complete

Supplying and fixing in position of Powder coated G.I roofing sheet of 0.47mm thick with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers.

supplying and fabricating in position of structuralm steel work (MS angle, channel , plates) cost including welding and cutting,/bolts and nuts including one coat of red oxide primming coat etc complete

supplying,fabricating in fixing in position of MS grill with outer frame of angle cost including cutting and welding etc completed

supplying and laying of 20mm thick shahabad stone slab with base cement mortar 1:3 30 mm thick, cement grouting and top finishing etc complete

Dadooing walls with following best approved quality, white / colour glazed tiles of 150 x 150 x 6mm set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best quality double charged Virtified Tiles of size 600 x 600 x 10mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three M sand) 20 mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand or M Sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three M Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

supplying and laying wet mix mecadem using 6mm to 40mm grade HBG stone jelly with stone dust mixing with water, consolidation with power roller etc complete

Supplying and laying of Interlocking Paver Block Stone 83 mm the Over a base layer of sand filling incl. Cost of materials laying and Labour charges etc., as directed by the departmental officials.

supply and fixing chain link fencing with M.S angle of size 65x65x6mm with 1.50m height etc complete

Construction of Inspection Chamber following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Mould Bricks of size 9" x 4 1/2" x 3" with Plastering with Cement Mortar 1:3 [One Cement and Three M Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. (0.45 m×0.45 m)

Construction of manhole chamber 1.00 x 1.00 x 1.00 to 2.00 m depth including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Ground Mould Bricks of size 9" x 4 1/2" x 3" with Plastering with Cement Mortar 1:3 [One Cement and Three M Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification

supplying and fixing S.S sink of size 0.6x 0.45x0.20m with all accessories etc complete

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed. 110 mm dia PVC Pipe [4 Kg/SqCm]

Over Head PVC Water Tank 2000 Lts capacity

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter and should have provision to fix aldrops, tower bolt hinges and lock plates inclusive of cost of all materials etc complete complying with thew standard specifications.(sor p.no:49, S.No:2828)

Providing & fixing open uPVC SCH-80 class water pipeline of ISI mark and approved make of following diameters at all levels, including all necessary heavy duty specials and fittings of ISI mark and of approved make, fixing witharrangement viz. standard pattern holders bat clamps made out of Galvanised Steel (GI) flat carrier fixed with GI bolts in the RCC or brick masonry and GI "C" clamp fixed to secure the pipe with GI bolts / screws / washers of required shape and size so as to fit tightly on the pipes when tightened with screwed, making holes, cutting floors, making good the walls and floors etc. complete as directed - for providing and laying 65mm dia uPVC Pipeline.(Below Ground Level). 40 mm UPVC Pipe

Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. 25 mm CPVC Pipe

supplying and fixing 50mm dia PVC pipe line 10kg/cm with specials.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) .Gate Valve 40 mm

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position of Indian make water closet of orissa pan 1st quality of size 584mm including flushing valve system with necessary pipe arrangement fixed over sand cushion and forming flooring alround etc.complete.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level. 110 mm Dia

160 mm Dia

Supplying and fixing position CI Nahini Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Electrical-Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (12 ways SP DB with IP54 Protection) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 40 A DP - 1 Nos Outgoing 6 / 10A SP - 6 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board ( 4 way Vertical Industrial Type TPMCB DB with IP54 Protection ) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 100 A 4P Isolator - 1 Nos Outgoing 32A SP MCB - 6 Nos.

Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable MS box to house 5A control switch 16A fuse unit (500V) etc with suitable angle iron frame work with door and with lock and key arrangements and with supply and fixing of 70W Single Arm street light fluorescent fitting with copper chokes and condenser with 32mm dia GI pipe (Class 'B') complete with necessary clamps on the above post with PVC unsheathed leads with painting of suitable colours. Single Arm with Pole

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board ( 4 way Vertical Industrial Type TPMCB DB with IP54 Protection ) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 100 A 4P Isolator - 1 Nos Outgoing 32A SP MCB - 6 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (12 ways SP DB with IP54 Protection) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 40 A DP - 1 Nos Outgoing 6 / 10A SP - 8 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (8 ways SP DB with IP54 Protection) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch gear given below inter connection as per detailed specification enclosed, along with powder coating . All MB & RRCB / ELCB shall be of min 10 KA rupturing capacity, RCCB / ElCB shall have sensitivity of 100 MA Details of INCOMER : 40 A DP - 1 Nos Outgoing 6 / 10A SP - 4 Nos.

Supply, Instalation & commisioning of fabricated/readymade MCCB type electrical distribution board (4 ways TPN DB OUT GOING) Flush Type, Indoor enclosure, hinged front cover, dust & vermin proof complete with switch geargoven below interconnection as per detailed specification enclosed, along with powder coating . All MB & RRCB/ELCB shall be of min 10 KA rupturing capacity, RCCB/ElCB shall have sensitivity of 100MA Details of INCOMER : 63 A 4P - Isolator Outgoing 6 / 10 A SP - 4 Nos. LT Cable

Supply and Laying XLPE insulated outer and inner PVC sheath, 1100 V grade. armoured Copper conductor cable size of cable 3-1/2 x 50 sq mm.

Supply and run of 2 of 4 sqmm (84 / 0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection 2.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Copper conductor of 1100 V grade and making good of the concealed portion with suitable colour.Termination

3 x 6 sqmm (56/0.3) PVC armoured SC cu.conductorCable

Supply & run of 2 of 2.5sqmm (36/0.3) PVC insulated SC unsheathed cu. conductor of 1100V grade in suitable PVC rigid pipe on conceled & ceiling with continuous earth wire connection of 1.5sqmm (22/0.3) PVC insulated SC unsheathed cu. conductor of 1100V grade and making good (For LDB to Switch Board)

Light Points Wiring with 2x1.5Sqmm. (22/0.3) PVC insulated unsheathed SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall & ceiling with PVC accessories with 1No. 1 Module metal flush type box with suitable cover plate and 1 No. 6A one way SP 1 Module switch in flush with wall for making good of the concealed portion with suitable colour for PVC concealed light point. (Box, cover plate and switch should be Legrand) (5 Points Per Coil)

Supply & fixing of 1 No. of 12 module metal flush type box with suitable cover plate comprising of 2 Nos. 10 A one way SP 1 module switch with 2Nos.16/ 6A 2/3 pin combined socket shuttered in flush with wall with necessary connections (Box, cover plate and switch should be Legrand )

Supplying and fixing of 24W LED Fitting (Havells or Equivalent) with LED including cost of material, labour etc,

Supplying and fixing of 36W LED Square Surface Fitting (Havells or Equivalent) including cost of material, labour etc,

Supply and fixing of 11 W LED Fittings as per Direction of the Fedration Officer

Supply and fixing of AC high speed Ceiling fan complete 1200 mm (48") with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of 300mm sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

GST(Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.)

CONTINENTAL CONSTRUCTION COMPANY