Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC | L1 | Accepted-AOC Accepting being lowest | |
| 2 | L2₹35.5 L+₹1.1 L (3.15%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | L3₹38.0 L+₹3.7 L (10.7%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest | |
| 4 | L4₹39.0 L+₹4.6 L (13.4%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest | |
| 5 | L5₹39.9 L+₹5.5 L (15.9%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than lowest |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Krithika S, Offg GE
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
COMPREHENSIVE REPAIRS TO MES OFFICE COMPLEX, ASSAYE LINE, UMRAO ENCLAVE, MH, MDC, MES COLONY, NCC AND BDE HQ AT AURANGABAD UNDER GE (S) AHMEDNAGAR
2023_MES_601870_1
8984/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Aurangabad
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹1 L
Yes
10 Jul 2023
7 Jun 2023
7 Jul 2023
7 Jun 2023
5 Jul 2023
21 Jun 2023
7 Jun 2023 - 14 Jun 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified and as directed..
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.
Dismantling of kota stone slab, granite stone slab, interlocking blocks, Cudappah stone slab, chequered tiles etc of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.
Taking down cement plaster on brick/ stone/ concrete wallls including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed.
Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf complete all as specified & as directed.
Taking down aluminium frame and shutters of doors, windows & ventilators any type all as specified and as directed.
Taking up or down 15mm bore existing steel tubing and connections complete all as specified and as directed
Taking up or down 20mm bore existing steel tubing and connections complete all as specified and as directed
M&L for PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in roof kerbs/mud stops, rounded or chamfered on edge/bed blocks for hold fasts including necessary formwork complete all as specified and as directed.
M&L for factory made precast solid blocks of PCC 1:2:4, type B1, using 20 mm graded stone aggregates as in kerb stones of size 300mmx150mmx 300mm, setting in cement mortar 1:6 complete all as specified and as directed.
M&L for precast reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregates in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately.
M&L in repairs, for precast cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregates as in louvers and jallies, 25mm thick (measured solid), including all mouldings, mild steel wire in reinforcement, set in cement mortar 1:4 all as specified and as directed.
M&L for precast cement concrete, 1:2:4, type B1 using 20mm graded stone aggregates as in window or door cills, lintels, bressumers, steps, string courses, copings, kneelers, apex stones, pier caps, columns, posts, bed plates, pintle blocks, anchorage blocks, corbels, brackets, etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match all as specified and as directed.
M&L for brickwork with old size, sub class ‘B’ bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.
All as per serial item No 20 but except bricks Note : Old bricks obtained from demolition shall be used.
S&F second class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed
M&L for second class hardwood , 35 mm thick, factory made, plain framed , panelled shutters (two panels ) with panel of 9 mm thick BWP plywood bonded with high quality phenol-formal-dehyde synthetic resin adhesive, confirming to IS-710, the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & as directed.
S&F 35 mm thick, second class hard wood, glazed and and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.
M&L for 30mm thick, flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.
S&F factory made, solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet, reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing given in SSR 2009 Part I complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed. .
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
S&F 100 mm size mild steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.
S&F 100 mm butt hinges medium weight stainless steel , ISI marked, fixed to PVC chowkats with screws complete all as specified and as directed.
S&F 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.
S&F 150 mm size aluminium handles, cast type, anodised complete all as specified and as directed.
S&F mortice lock, vertical type, 65mm, brass, four lever, complete all as specified and as directed .
S&F in repairs, Harrison curtain rails, 20mm dia, mild steel, plastic coated, fancy type, fixing with and including brackets, stops etc complete wooden or PVC plug all as specified and as directed.
S&F window venetian blinds of approved colour imported cloth blinds, horizontal, including stainless steel channels, sliding nylone rope & all necessary fittings and fixtures all as directed by Engineer-in-Charge including taking down old venation blinds all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame, complete all as specified and as directed.
S&F in repairs, galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame, complete all as specified and as directed.
S&F in repairs, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundaion box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed .
M&L for framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.
S&F mild steel TMT bars, 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
All as per serial item No 41 above but 6mm to 8mm dia.
M&L for rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames including cutting to required length, welding, etc, including hold fasts complete all as specified & as directed.
S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.
S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete without glazing bars, complete all as specified and as directed.
S&F anodised aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.
S&F anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc and locking arrangement complete all as specified and as directed .
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc cmplete all as specified and as directed .
S&F anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and as directed .
Supply and fixing three track sliding window with two shutters with 4mm thick tinted or plain glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18 mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc; fabricated using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and as directed. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. (Note:- Cost of Tinted glass & wire cloth shall be included in the quoted rate of the item).
M&L for repairing existing steel window with 'Z' section, area of window n exc1.50 sqm each including box type hinges, steel handle, tower bolts (75mm long ) and peg stay including welding or riveted complete all as specified and as directed.
M&L for repairing aluminium doors and windows including provision of new screws, nut bolts, rubber gasket, lock, handle, tower bolt, peg stay etc complete and making the door/window fully functional all as specified and as directed.
S&F in repairs, 40mm thick insulated PVC wall lining consisting of PVC insulated panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall all as specified and as directed.
S&F 9mm thick premium quality laminated PVC tiles 600mm x 600 mm in ceilling fixed with screws, including GI frame work for false ceiling, comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to center/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm seuspended from soffit at approx 900 mm center to center GI cleat and steel expansion fasteners with and including ceilling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to center frame work including hanger 6 mm dia GI wire upto 1200 mm length adjustable level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long including dismantling existing false ceiling boards,hangers & framework complete all as specified and as directed.
S&F 6mm thick, asbestos cement corrugated or semi corrugated sheets in roofs, walls etc, fixed with L or J type or cranked hook bolts all as specified and as directed.
S&F 6mm thick, asbestos cement, two piece, serrated ridge for corrugated or semi corrugated asbestos roof sheets, fixed with L or J type or cranked hook bolts all as specified and as directed.
S&F prepainted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, all as specified and as directed.
S&F in repairs, asbestos cement plain building boards, 4mm thick, fixed to mild steel frame work with screws including preparing new surfaces of Asbestos Cement ceiling boards and applying three coats of white wash in ceiling complete all as specified and as directed.
M&L for water proofing treatment to RCC roof slab, parapet, chajja etc comprising with the following treatment/specifications from bottom to top including taking down/demolition existing decayed water proofing treatment with PCC padding if any on roof:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point. (ii) 25mm thick(average) PCC type B-0,(1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cementmixed with WPC @ 3% by weight of cement. (iii) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement, finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (iv) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (v) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (vi) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.
Supply only water proofing compound complete, ISI mark all as specified and as directed.
M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4, type B0, using 12.5mm graded stone aggregates in subbase, finished even & rough to receive cement mortar bedding complete all as specified and as directed. Note : This item shall not be executed alongwith item No 61
M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4, type B1, using 20mm graded stone aggregates, laid in panel, finished even & smooth with using extra cement as in flooring complete all as specified and as directed.
S&F glass dividing strips, 3mm thick and 38mm wide, inserted in position, conform to design of flooring complete all as specified and as directed
M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.
All as per serial item No. 66 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.
M&L for 18 to 20mm thick granite(of any type) work (table rubbed & polished ) in window door cills/jambs ,steps, pillars, cooking platform like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade with granite laid over & including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
Rounding, mirror polishing the edges of stone slab provided in steps, cooking platform and similar work all as specified and as directed.
M&L for 20-25 mm thick machine cut Cudappah stone slab, laid over and including 20 mm thick screed bed in cement mortar 1:6, including roughening of old concrete floor surfaces by hacking, picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and polishing complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc, laid over & including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm as in floors etc. laid over & including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.
M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm as in floors etc, laid over & including 15 mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and as directed.
M&L for light colour vitrified tiles, 10 mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, complete all as specified and a directed.
All as per serial item No 74 above but in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement mortar 1:4 .
M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 300mm x 200mm x 6 to 7mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.
M&L for glazed coloured ceramic tiles(shade as approved by GE) of size 350mm x 250mm x 7mm/450mm x 350mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.
M&L for chequered cement concrete tiles 25cm x 25cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors, over and including 20mm thick screed bed in cement mortar 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed.
M&L for machine pressed precast concrete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M -35 grade with grey cement and pigment, laid over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick surface/ concrete surfaces, finished even and fair complete all as specified and as directed.
M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick surface/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement all as specified and as directed.
M & L for preparation of newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over one coat of chalk whitining complete all as specified and as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over one coat of primer all as specified and as directed.
Hacking out of old broken glass (any thickness ,size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.
S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete.
S&F tinted glass, 4.8 mm thick as in glazing to aluminium door, window & partition including pad/gasket complete all as specified and as directed .
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
M&L for 15 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, concealed in wall or laid in floors etc complete all as specified and as directed.
Refixing old steel tubing 15mm bore, with and including provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
M&L for 20 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings, or laid in floors etc complete all as specified and as directed.
Refixing old steel tubing 20mm bore, with and including provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.
S&F in repairs, ball valves high pressure, PTMT with epoxy coated aluminium ball rod and high density plastic ball screwed for 20mm bore iron pipe (Minimum weight 210 gms) complete all as specified and as directed.
S&F in repairs, bib tap, 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repairs, stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, stop valve, 20mm dia, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.
S&F in repairs, 15mm bore, fancy type chromium plated pillar tap (quarter turn), cast copper alloy, with capstan head, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts etc complete all as specified and directed. Make : Jaquar Cat Part No OPL-15001 or equivalent of Parryware/ Kolher/ Johnsons/ Hindware/Prayag
S&F in repairs, 15mm bore, Brass Chromium Plated wall mixer with telephonic shower arrangement for mixing hot & cold water, screwed down for iron pipe etc complete all as specified and as directed Make : Jaquar Cat Part No QQT-7217 or equivalent of Parryware/ Kolher/ Johnsons/ Hindware/Prayag
S&F in repairs, PVC connections 15 mm dia, 450mm long with PTMT nuts all as specified and as directed.
S&F in repairs, grating doom round 140 mm size of PTMT (Minimum weight 50 gms) all as specified and as directed.
S&F in repairs, swivel shower of PTMT (Minimum weight 40 gms), any colour fixed with and including shower arm 15 mm size (Minimum weight 40 gms), 195 mm long with bend of 45 degree with flange of PTMT any colour all as specified and as directed.
S&F in repairs, 110mm dia, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified and as directed.
S&F in repairs, 110mm dia PVC (SWR) bends any radius all as specified and as directed.
S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.
S&F in repairs, vitreous china wash down water closet (pedestal pattern), white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.
S&F in repairs, snow white one piece EWC floor mounted, glossy finish with soft close seat cover, S/P trap etc complete all as specified and as directed. Make : Parryware cat part No C847K Ceramic Single Piece Closet Entice(White ,One Piece) or equivalent of Jaquar/Kolher/Johnsons/Hindware
S&F in repairs, toilet paper holder on the wall complete all as specified and as directed. Make : Jaquar cat Part No AQN-7751 or equivalent of Parryware/ Kolher/ Johnsons/ Hindware/Prayag
S&F in repairs, PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32mm bore PVC flush pipe, all as specified and as directed.
S&F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed.
M&L in repairs, vitrerous China urinal, half stall (back to corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including brass chromium plated urinal spreader, flush pipe, grating and Union for discharge pipe and PVC waste pipe 32mm dia all as specified and as directed.
S&F in repairs, vitreous china urinal (with integrated sensor) including all necessary fitiings all as specified and as directed. Make : Hindware cat part No: 60018 Pastels in colour or equivalent of Parryware/ Jaquar/Kolher/Johnsons
S&F in repairs, 12mm thick glass for partition wall exc 0.50 sqm but n. exc 1.5 sqm etc fixed with brackets complete all as specified and as directed.
S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12 cm wide and 60 cm long with chromium plated bracket guard and railing complete all as specified and as directed
S&F in repairs, 32 mm dia, standard PVC waste pipe for wash hand besin all as specified and as directed.
S&F in repairs, 40 mm dia, standard PVC waste pipe for sink all as specified and as directed.
S&F in repairs, jet spray, chromium plated with 1 mtr, heavy PVC hose butterfly type, with chromium plated nuts, suitable for 15mm pipe, complete all as specified and as directed. Make : Prayag cat No BEA-17 or equivalent of Jaquar/ Cera/ Hindware/ Parryware/ Kolher
S&F in repairs, plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.
S&F in repairs, chromium plated health faucet with 1 meter flexible tube & hook complete all as specified and as directed. Make : Prayag cat No BEA-41 or equivalent of Jaquar/ Cera/ Hindware/ Parryware/ Kolher
S&F in repairs, mirror cabinet PTMT of size 400mm x 500mm (or nearest size) with magnetic locking arrangements, fixed with and inclduling chromium plated brass screws and PVC rawl plugs complete all as specified and as directed. Make : Cat No. 554 of Prayag or of equivalent model in other makes specified in approved list of makes.
S&F in repairs, sinks with drainage board, made of stainless steel 1mm thick, glossy, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm, bowl size 410mm x 352mm x 200mm {or nearest size} all as specified and as directed. Make : Cat part No. SBSD 05(RR) of Jayna or of equivalent model in other makes specified in list of approved makes.
M/S Tirupati Goroba Shendge
sonu enterprises
M/s S.R lahoti
M/s.M G Kulkarni
M/S. M.A. Sharief engineers and contractors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .