Purchase of Furniture

Amount

Furniture specification

Computer Table : Computer table with steel frame pull out tray for keyboard & collecting tray for printout & lockable drawers. Overall size : W-90×D-60×4-75 (cm) (36’’×24’’) 1. The top will be banded with high quantity 2 mm PVC edge beading by hot melt glue process in 180 oc. 2. All steel parts in powder coated finished with standard quality powder after 10 tanks antirust treatment.

Computer Chair : Low back revolving and push back with round PU handle or PP Arm moulded foam cushioned seat and back covered with ABS shell Seat height adjustment with pneumatic gas lift and tilt lock mechanism. Overall size : H-88-98×wW-60×D-70 (cm), H-970×D : 650 ×W: 560 mm.

Office Table : For Staff Overall size : 54’’L×30’’W×30’’H. Office table tubular frame, 3 drawer unit in one side & box type locker with one/two shelf on other side with footrest Main Top :18 mm thick wood base pre laminated Partical board 2 mm PVC bidding by hot melt glue process frame of the table are made up of MS square/round tube of 18/20 SWG. Three drawer and box type locker are made of CRCA sheet of 22/23 SWG with good locking system. All steel parts are powder coated finished after 10 tank antirust system.

Chair for staff : Office chair molded foam seat & back. Up holstered in high quality tapestry S type frame from ERW prime quality tube of 16 swg, reinforced at all bends by additional pipe for static & impact load with cushioning effect powder coated finish after 10 tanks anti rust treatment.

Almirah/office store well : Overall size : 78’’H×36’’W×18’’ D with four adjustable shelves making 5 compartments, All steel parts are made up of CRCA sheet of 22/22 SWG with standard powder coating 10 tank antirust treatment. Best quality lock with 6-12 lever inbuilt locking system with brass or harden material & non interchangeable S.S. keys in duplicate.

Almirah/Office Storewell with locks : Overall size : 78’’H×36’’W×18’’ D with four adjustable shelves making 5 compartments, All steel parts are made up of CRCA sheet of 22/22 SWG with standard powder coating 10 tank antirust treatment. Best quality lock with 6-12 lever inbuilt locking system with brass or harden material & non interchangeable S.S. keys in duplicate. Locker in one compartments with 2 Shelves

Book case 4 door : Overall size : 66’’H×33’’W×12’’ D 1. Having 4 glass door compartments. 2. All the sheets are made from CRCA sheet with 20 & 22 gauge (swg) with powder coated with 10 tank antirust treatment. 3. With precision lock and common key.

Book case 5 door : Overall size : 78’’H×33’’W×15’’ D 1. Having 5 glass door compartments. 2. All the sheet are made from CRCA sheet with 20 & 22 gauge (swg) with powder coated with 10 tank antirust treatment. 3. With precision lock and common key.

Filing Cabinets (4 drawers) : 4 drawer filing cabinet with automatic locking arrangement. Each drawer will be mounted on derlin ball bearings with double extension telescopic channel. Overall Size : H-1320 x W- 470 x D- 623 (mm) (H-51.9’ x W- 18.5” x D- 24.5”) Clear inside dimension of each drawer size : H-250 x W-385 x D-560 (mm). All steel parts in powder coated finished with superior quality powder after 10 tanks antirust treatment.

Sofa-Set : S.S. 3 seater Cluster chair (perforted) with handle Overall size : L -71 x D - 28 x H 30 (inches)

Desk cum bench for senior students : M.S. Round Pipe with 16 SWG powder coated after 10 tank antirust treatment frame with wood based high quality branded laminated practical board with PVC bidding with lower book shelf. Over all size for two seater : H : 760 × W: 1040 ×D-1000 (in mm). Over all size for three seater : H : 760 × W: 1560 ×D-1000 (in mm).

Classroom Chair with writing pad : 1. foldable writing pad on one side and are mount on other side type of seat and back rest perforated M S Sheet 0.71 mm thickness frame material M S pipe of diameter 19 mm & wall thickness 16 SWG. Writing pad material 18 mm, preliminated particle board, writing pad size : L : 560 × W : 295 in mm chair size : Depth of seat 400 mm × height of seat 440 mm × width of seat 440 mm Overall chair height 830 mm, height of back rest 440 mm.

Seminar room chair without writing pad : Arm on both side, type of seat and back rest perforated M S sheet 0.71 mm thickness frame material M. S. pipe of diameter 19 mm & wall thickness 16 SWG. Chair size : depth at seat 400 mm × height at seat 440 mm × width of seat 440 mm. Over all chair height 830 mm, height of back rest 440 mm

Sofa set (3 seater/2 seater/1 seater) material specification : 1. frame : seasoned soalwood frame, frame structure of 2”× 1½’’ with support & combination 18 mm & 6 mm ISI BWR plywood. 2. Cushion : not less than 40 density, 4’’ U foam + 1’’ recron fabric (5’’) in seat & not less than 32 density 3’’ U foam + 1’’ recron fibre (4’’) in black fixed. 3. fabric : Branded fabric/leatherette up holstey. 4. The hardware used will be of branded quality size :- Size : 1 Seater 2 Seater 3 Seater L : 800 1350 1800 W : 800 800 800 H : 800 800 800

Slotted angle steel Rack : (Open type) 1.frame : seasoned angle : 40 ×40×2 mm of HR sheet Shelves : 20/22 SWG MS corner plates of 20 SWG All nuts & Bolts of standard with galvanized good quality PVC shoes. All steel parts in powder coated finished with standard quality powder after 10 tanks antirust treatment. Over all size : 1. 96×36×18 (6 shelves) 2. 78×36×15 (6 shelves) 3. 78×36×15 (6 shelves) 4. 72×36×15 (6 shelves)

Steel Cot: 1.single bed for Hostel, bed frame Structure made up of prime quality MS rectangular tube25×50×1.2 (mm) (18 SWG) 3 Support panel for placement of mattress of above specification, material of mattress of panel of waterproof plywood of 12 mm. All steel parts in powder coated finished with 10 tank antirust treatment.

Plastic Chair : Plastic chair with arms in virgin material chair should be sturdy enough.

Study table : Study table should be made up of rectangular tabular section of size 24’’×36’’x 30’’ Top of pre-laminated board 18 mm thick with PVC edge bidding on all side frame 30×30×1.5 mm. ERW tube.

Dinning Table : Canteen Table With S.S. Top and Powder Coated M.S. Frame along with colapsable SS Top Stool Size : Stool Height 500 mm, Stool Top 18 SWG With 18mm Thick Table Main Top at 18 swg Water Proof Plywood With 10 mm thick With Water Proof Ply for Top below Side. Frame: Top Of Frame 25 x 25 x 3mm Ms Angle Legs, Footrest & Stool Frame 30 x 30 x 1.2mm (18 swg) With Good quality Of Pvc Shoes. 1). Eight Seater L: 2400,W: 900, H: 760. 2). Six Seater L : 1800 W : 900 H: 760

Stool : Stool Frame Of 25 x 25 x 1.2mm(18swg Thick) in ms Square Pipe With Good Quality Of PVC Shoes. Top Size: 15 x 15 x 18 Stool Frame is ms Square Pipe 25 x 25 x 18 Square With Power Coating & Good Quality PVC Shoes. Stool Top Size: 15 x 15 (Wooden Top Thickness 18 mm With beading & Finishing Stool Height : 18mm

Executive Table : Size : 60 L x 36 W x 30 H Executive Table With One Side Storage Unit of 3 Drawers And Central Drawer mounted On Telescopic Channel Material Description : Main Top With 18 mm Thick, Wood Base High Quality Pre-Laminated Practical Board Of Tesa & All edges are Sealed With 2 mm Thick PVC Edge Band By Hot Melt Glue Process all Around

Executive Table : Size : 72 L x 36 W x 30 H Executive Table With One Side Storage Unit of 3 Drawers And Central Drawer mounted On Telescopic Chanel Material Description : Main Top With 18 mm Thick, Wood Base High Quality Pre-Laminated Practical Board Of Tesa & All edges are Sealed With 2 mm Thick PVC Edge Band By Hot Melt Glue Process all Around.

Side Table : Main Top and Leg of 25mm. thick MDF Board with 0.6 mm laminated & side edge sealed with lapping. Back Panel of 18 mm thick MDF Board with 0.6 mm laminated All Drawer on Telescopic Channel with SS handle & locking arrangement. Size Return Table – 4 X 3

Executive Chair : Premium Executive High Back Chair in Rexin/ Tested approved BIFMA Standard Lab. Overall size – H: 103X76.3X76.3 cm Centre Tilt Mechanism Seat & Back from hot mould plywood of minimum 12 mm Thickness of ergonomics design to avoid back pain. Seat Height adjustment with pneumatic gas lift with 300 N force stroke length of 12.5 cm. Cushion – PU from having 40 kg/ m3 for back and 50 kg/ m3 for seat. Avg. thickness of foam not less than 50mm 10mm Polly foam. Arm Single Piece round soft virgin quality PU handle reinforced within built steel Rib.

Executive Chair : Trademark Registered Brand Executive High Back Revolving Chair, Tested by BIFMA (As per A.R) Finish in High quality leatherette. Size H- 101.5-117.5X W:76X76 (cm.) Seat Height – 46.5 – 55.5 (cm.) 5 Position Locking system with swivel Mechanism Moulded foam – The seat & backrest are made up of moulded polyurethine foam of the right density & Thickness. Cushion PU from having 40 Kg/m3 for back and 50 Kg/m3 for seat. Avg. Thickness of foam not less than 50 m 10 mm polly foam. Arm Single Piece round soft virgin quality PU handle reinforced within built steel Rib. Synchro Mechanisam.

METHODEX SYSTEMS PVT LTD

GEEKEN SEATING COLLECTION PVT LTD

Jalaram Steel Furniture Pvt. Ltd.