138WE/L-12/25-26

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for laying of pipe etc and getting out in soft/loose soil, complete all as specified and/or directed .

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and/or directed . Note : Punned thickness will be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat of size 250mm x 150mm x 40mm, complete all as specified and directed .

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed .

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed and directed .

Materila and labour for PCC 1:4:8 type D2 ( using 40mm crushed graded stone aggregate) as in base for fouondation of the pole, complete all as specified and directed .

Material and labour for providing PCC 1:3:6 type C2 ( using 40mm crushed graded stone aggregate ) as in mass filling complete all as specified and directed .

Material and labour for providing PCC 1:2:4 type B1 ( using 20mm crushed graded stone aggregate) for plinth coping including form work complete all as specified and directed .

Supply and fix in replacement of pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified and directed .

Supply and fixing in repair of damaged/unserviceable steel tubular swaged street light poles & cast iron base plate,finial taper plug,bolts,nuts and screws as specified type 410 SP-31 9.0 mtr long and painting with two coats of aluminium paint over one coat of primer on exposed surface of pole complete all as specified and directed .

Supply and laying in repair of XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 50 Sqmm 3.5 core laid in trenches or passing through pipes,ducts or fixed to walls/poles complete all as specified and directed.

Supply and laying in repair of XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 95 Sqmm 3.5 core laid in trenches or passing through pipes,ducts or fixed to walls/poles complete all as specified and directed .

Supply and laying in repair of XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 25 Sqmm 4.0 core laid in trenches or passing through pipes,ducts or fixed to walls/poles complete all as specified and directed .

Supply and fixing in repairs off load change over switch 415 Volts in sheet metal enclosure 4 pole of capacity 400 Amps complete all as specified and directed .

Supply and fixing of cross arms bracing support clamps, back plates fabricated from steel section made out of Fe-0-310/Fe-0-410 including nuts, bolts and washers welding, drilling hole complete including two coats of aluminium paint over one coat of primer complete all as specifed and directed .

M&L in replacement of ACSR conductor drawn straight horizontal on over head lines on existing/new poles including binding with insulators. Weight of conductor shall be measured straight horizontal distance between centre of two adjacent poles and calculating weight of conductor of size and length by adding 3% extra for sag, jointing jumpers,etc complete all as specified and directed .

M&L in replacement of galvanized steel wire 4mm dia for continuous earth wire complete all as specified and directed .

Material and labour for painting of 11 mtr steel pole and cross arm, clamp of any length and shape for HT overhead line with rwo coat of aluminium paint including preparation of the existing surface and marking pole numbers in a 15cm dia yellow circle & making three bands width 30cm by enamel paint from bottom of pole to 1.5 mtr height completet all as specified and directed .

Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed .

Taking down old unserviceable DB & supply and fix in replacement MCB distribution board single pole and neutral 4 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete all as specified and directed .

Taking down old unserviceable DB & supply and fix in replacement MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door completecomplete all as specified and directed .

Taking down old unserviceable DB & supply and fix in replacement MCB distribution board single pole and neutral 12 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete complete all as specified and directed .

Supply and fixing MCB single pole and neutral 63 Amps, 10 KA rating , 240 Volts.

Supply and fixing MCB single pole and neutral 40 Amps, 10 KA rating , 240 Volts.

Supply and fixing MCB single pole and neutral 32 Amps, 10 KA rating , 240 Volts.

Supply and fixing and fix MCB Single Pole 05 to 30 Amps 10 KA rating , 240 Volts.

Supply and fixing MCB Triple pole and neutral 63 Amps 10 KA rating , 415 Volts

Supply and fixing in repairs submain wiring with two single core FRLS cable of size 2.5 sqmm 1100 volts grade drawn in concealed conduit including 2.5 sqmm copper multi-stranded conductor PVC insulated FRLS earth wire connected to main board complete all as specified and directed .(Two Number of cable and one number earth wire shall measured together as unit length)

Supply and fixing in repairs submain wiring with two single core FRLS cable of size 4 sqmm 1100 volts grade drawn in concealed conduit including 4.0 sqmm copper multi-stranded conductor PVC insulated FRLS earth wire connected to main board complete all as specified and directed .(Two Number of cable and one number earth wire shall measured together as unit length)

Supply and fixing in repairs submain wiring with two single core FRLS cable of size 6 sqmm 1100 volts grade drawn in concealed conduit including 6.0 sqmm copper multi-stranded conductor PVC insulated FRLS earth wire connected to main board complete all as specified and directed . .(Two Number of cable and one number earth wire shall measured together as unit length)

Taking out old unserviceable submain of any size and supply and fix in replacement submain wiring with two single core FRLS cable of size 10 sqmm 1100 volts grade drawn in concealed conduit including 10.00 sqmm copper multi-stranded conductor PVC insulated FRLS earth wire connected to main board complete all as specified and/or directed by Engineer-in-Charge. (Two Number of cable and one number earth wire shall measured together as unit length)

Disconnecting HT/LT cable and Earthing connections of burnt/defective transformers of capacity of 250 KVA , 11 kv/433 volts 3 phase from pole/floor mounted, taking down from site of installation carefully with the help of crane and transportation of the same to workshop for repairs, draining out the transformer oil, dismantling complete and taking out the core assembly and removing brunt out windings, dehydrating the core assembly, reassembling transformer after repair, filtred/ dehydrated, topping up oil, carrying out routine tests, including transportation back to site, testing on full load after making cable and earthing connections complete all as specified and directed . (Note :- New transformer oil, Dehydration of old transformer oil shall be measured and paid separately.)

Supply and fixing PVC conduit medium grade 25 mm external dia ISI marked with accessories such as tees,bends,junction box,bell mouth tube ends,including fixing accessories locks as couplers,lock-nuts,pipe hook etc in walls ceiling etc including necessary cutting ,chases etc and making good as per existing surface complete all as specified and directed .

Supply and fixing 433 volt procelain bushing insulators for LT side of out door/ indoor type transformer of capacity 250 KVA complete all as specified and directed .

Supply and fixing in repairs 11 KV procelain bushing insulators for HT side of out door/ indoor type transformer of capacity capacity upto 250 KVA complete all as specified and/or directed by Engineer-in-Charge.

Supply and fixing in repairs worn out LT bush assembly made out of brass with heavy duty brass complete with brass spindle, nuts, bolts, washers etc without bushing insulators all as per existing size, shape and length, suitable for capacity upto 250 KVA capacity transformers complete all as specified and as directed

Supply and fixing in repairs worn out HT bush assembly made out of brass with heavy duty brass complete with brass spindle, nuts, bolts, washers etc without bushing insulators all as per existing size, shape and length, suitable for capacity upto 250 KVA capacity transformers complete all as specified and as directed

Supply and fixing in repairs new cork sheet gasket, 6 mm thick, superior quality, on top cover plate of the transformer 250 KVA after taking down/out gasket as existing at site complete all as specified and as directed.

M&L for rewinding of LT winding with copper strip of suitable size/gauge, fixing the coil in the position in core assembly and making connection as per original pattern including providing insulation, complete all as specified and as directed.

M&L for rewinding of HT side coil with super enameled copper wire of suitable size/gauge, fixing the coil in the position in core assembly and making connection as per original pattern including providing insulation, complete all as specified and as directed.

Supply and fixing in replacement Tap changer switch suitable for suitable for Transformer of capacity 250 KVA complete all as specified and as directed.

Supply and filling of transformer oil for transformers installed at various locations for topping up complete as per IS 335-1993 complete all as specified and directed.Make :Power link, Savita Power Oil

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanised Iron strip 32 x 6 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.

Supply and fix in repairs feeder pillar box of suitable size with incommer MCCB of capacity 160 Amps 25 KAa, four pole ,415 V with 4 Nos aluminium bus bar strip along with 14 Nos MCB SPN 63 Amps, 240 Volts, C type with Din rail for mounting and necessary wiring for MCB,s complete size all as specified and directed.

M/S SHEYSHAN ENTERPRISES (BID ID -3297744)

SUMEET TRADING CORPORATION (BID ID -3299135)