REPAIR TO COMPOUND WALL AND FENCING AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Demolition of reinforced cement concrete in beam,footing or of any description and in any position not other wise specifically provided for, and removal demolished materials and depositing the debris where directed complete all as directed by Eng-in-charge.

Material and labour for providing reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams ; bases for columnsetc complete all as specified and directed. Note:- Reinforcement & Form work will be measured & paid seperately.

Material and labour for providing reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded aggregate) as in column, pillar,piers etc complete all as specified and directed. Note:- Reinforcement & Form work will be measured & paid seperately.

Material and labour for providing reinforced cement concrete (nominal mix) 1:2:4 type B-1 (using 20mm graded aggregate) as in Beam,cantilever beams etc complete all as specified and directed. Note:- Reinforcement & Form work will be measured & paid seperately.

Material and Labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking bending spirally for hooping ends and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.

Material and Labour for reinforcement Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Use and waste of form work to sidees of concrete foundatioon, raft, footing, base of column, plinth beams etc rough finished surfaces all as specified and as directed.

Use and waste of formwork to sides of pillars, posts, struts, piles, columns and stanchions, etc to give rough finished to square, rectangular surfaces of concrete complete all as specified and as directed.

use and waste of Formwork to sides and soffits of Beams, cantilevers, lintels,including supports, overhangs, etc for flat rough finished surface of concrete complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all quoins,arches,pillers etc but excluding ashlar facings,dressed stone work and precast concrete articles.

Material and labour for walling of random rubble stone masonry, brought to coursed well bonded, bedded and solidly hearted built in CM 1:6 including through stone/bonders complete all as specified and as directed .

Material and labour for walling of random rubble stone masonry, brought to coursed well bonded, bedded and solidly hearted built in CM 1:6 except stone/boulder including removing of mortar and cleaning of stones , stack measurement ,extra handling and disposal off debris/rubbish complete all as specified and as directed .

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed.

Material and labour for Keyed pointing to random rubble stone masonry in cm 1:4 all as specified and as directed.

Dismantling of wrought iron or mild steel work in any description and in any position complete all as specified and directed

Supply and Fix mild steel Framed work such as grills etc. with ends of bars shouldered and/or riveted, framed guard bars and similar work conforming to Fe-290, Gde-E-165 all as specified and directed.

Supply and fix mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only of mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F in repairs Galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spaings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc a directed (each line of wire to be measured)

Dismantling of concertina coil dia 850mm to 1200mm or any size or description complete all as specified and directed.

Supply and Fix razor blade galvanised concertina coil of 1050mm diametre made out of 2.59mm thick galvanised wire having weight of each coil @ 15.2Kg+/-5%, stretched to a length of 10 to 12 M to achieve 950mm dia as in fencing to steel posts and to another coil/MS ribs including fixing with special galvanised fastners such as J clips, U clips C clips etc, fixed in position complete all as specified and as directed. NOTE: Linear measurement(per running metre of concertina coil of 1050mm dia) shall be measured and paid.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for unreinforced complete all as specified and directed

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in bed block for holding angle iron,string course,lacing course,copings,parapet,kerb etc including necessary form work complete all as specified and as directed.

Dismantling of fencing wire mesh any type and size complete all as specified and directed.

Dismantling Posts or struts (Steel or R.C.C) any section includiung taking out embedded portion and making good distrubed ground all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not ext 50m and making good surface in soft/loose soil complete all as specified and directed

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and each screwed end to be fitted with washers and one hexagonal or square not exceeding 5cm long & dia exc 5mm and n exc 10mm complete all as specified and as directed.

Supply only 4mm dia GI steel wire mesh of any size as in chain link fencing etc complete all as specified and as directed.

Fixing only GI steel wire mesh chain link fencing any size and type including straining and fixing to posts and to straining bolts including securing with and provision of galvanised iron, tying with wire etc complete all as specified and as directed

M&L mild steel round bars Fe 410W (Gde E-250) quality-A, 10mm dia and over cut to length, bent to shap required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Preparation of new untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Material and labour for preparation of old decorated surfaces of steel of any description exceeding 10 cm width or grith not otherwise specified and applying two coat of syntheic enemal paint over a coat of red oxide primer all as specified and as directed.

m/s m valasubramanian

SRI LAKSHMI GANESH ENGINEERING WORKS

JR ENTERPRISES