PROVISION OF KLP FOR INI (PHASE ONE OF TWO PHASES) AT CME PUNE

Amount

SCH 'A' PART-I: BUILDING/STRUCTURES Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Construction of Block of Single living accn for 12 JCOs complete all as shown in drawings and as specified.

Construction of Block of Scooter Shed (for 06 Scooters) with ramp for Single living JCOs complete all as shown in drawings and as specified.

Construction of Block of Scooter Shed (for 05 Scooters) with ramp for Single living JCOs complete all as shown in drawings and as specified.

Construction of Block of JCO’s Mess for 50 JCOs with compound wall and wicket gate complete all as shown in drawings and as specified.

Construction of Block of Single living accn for 14 Hav and 36 ORs including Cook house and dining hall complete all as shown in drawings and as specified.

Construction of Block of Office and Administrative accn complete all as shown in drawings and as specified.

Construction of Block of Covered Parking for 06 No Cars with ramp complete all as shown in drawings and as specified.

Construction of Block of Scooter & Cycle Shed (for 27 Nos Scooter and 06 Nos cycle) with ramps complete all as shown in drawings and as specified.

Construction of Block of Education building complete all as shown in drawings and as specified.

Construction of Block of Heritage/Motivation hall complete all as shown in drawings and as specified.

Construction of Block of Covered Parking for 02 No Cars with ramp complete all as shown in drawings and as specified.

Construction of Block of Scooter & Cycle Shed (for 06 Nos Scooter and 20 Nos cycle) with ramps complete all as shown in drawings and as specified.

Construction of Block of Drying and Ironing shed complete all as shown in drawings and as specified.

Construction of Block of Storage accn complete all as shown in drawings and as specified.

Construction of Block of LPG Store complete all as shown in drawings and as specified.

Construction of Block of Tradesmen Shops complete all as shown in drawings and as specified.

Construction of Block of Pump House complete all as shown in drawings and as specified.

Construction of RCC Overhead Water tank of capacity 10000 Gallons with 18 metre high RCC vertical staging from ground level including the following items complete all as shown on drawing Nos CEPZ/2023/KK/01/STR sheet 30/33 & 31/33 and as specified :- (a) RCC tank including staging and foundation (b) Plinth protection around the tank . (c) Steel ladders and railing as per details shown in drawing (d) GI flanged end, medium grade 65 mm bore pipe for inlet pipe and CI flanged ends centrifugally cast class 'B' pipe 100 mm bore for outlet, overflow and wash out pipes including fittings etc irrespective of what is shown in drawings. Duck's foot bends shall be provided at the bottom for all inlet, outlet, overflow and wash out pipes. All the pipes shall be taken out 1m from outer faces of a column of overhead tank. (e) Sluice valves 100 mm bore PN-1 as per IS:14846 - 03 Nos. (f) Air terminal (multi spike air termination of cooper), Lightning conductor, earth strips, Test point and earthing. (g) Aviation obstruction light including point wiring and control switch all as specified and directed. (h) Water level indicator. (j) Testing of water tank.

Construction of RCC Underground Water tank of capacity 10000 Gallons including the following items complete all as shown on drawing Nos CEPZ/2023/KK/01/STR sheet 32/33 and as specified :- (a) Steel ladder. (b) 100mm dia Air vent pipes (c) CI flanged ends centrifugally cast class 'B' pipes 150mm bore for inlet, 63mm bore outlet (2 Nos) and 100mm bore overflow pipes including fittings etc. All the pipes shall be taken out 1m from outer faces of RCC wall of the tank.

Construction of Dhobi Ghat (for 2 Stones) complete all as shown in drawing No. CEPZ/2001/TD/04 Sheet 1/1 and as specified.

Construction of Sentry Box Type ‘A’ complete all as shown in drawing No. CEPZ/91/TD/21M sheet 1/1 and as specified.

Construction of Garbage Bin complete all as shown in drawing No. CEPZ/97/TD/4 sheet 1/1 and as specified.

Construction of Septic tank for 150 users all as shown on drawing No. CEPZ/88/TD/17M sheet 2/4, 3/4 & 4/4 and as specified.

Construction of Soakage well of size 1.80 m dia and 3.00 m deep all as shown in drawing No. CEPZ/2019/TD/03 sheet ½ & 2/2 and as specified.

NOTE: Schedule ‘A’ Part II to X items have been Prepriced by MES and the Bidders shall insert their lumpsum cost in green field under Column-6 only.

Total amount of Sch 'A' Part-II (Internal Water Supply)

Total amount of Sch 'A' Part-III (Internal Electric Supply)

Total amount of Sch 'A' Part-IV (Rain Water Harvesting)

Total amount of Sch 'A' Part-V (Road, Path and Culvert)

Total amount of Sch 'A' Part-VI (Area Drainage)

Total amount of Sch 'A' Part-VII (Sewage Disposal)

Total amount of Sch 'A' Part-VIII (Fencing and Gate)

Total amount of Sch 'A' Part-IX (External Water Supply)

Total amount of Sch 'A' Part-X (External Electric Supply)

Total amount of Sch 'A' Part-XI (Site Clearance, Excavation and Earthwork)

NOTE: Schedule ‘A’ Part II to XI items which are not Prepriced by MES are given in Sch 'A' Part-XII, Bidders shall insert their rate in Column-6 only and the Estimated rate indicated as "0.0" are for that purpose.

SCHEDULE 'A' PART-XII (MISC B/R AND E/M WORKS)

S&F Bib taps, cast copper alloy, with crutch or butterfly handle, chromium plated with long neck suitable for kitchen sink screwed down, screwed for iron pipes or for brass ferrule and fixed to 15 mm bore/dia of pipe, complete all as specified and directed.

S&F Two way cock of cast copper alloy, with crutch or butterfly handle, chromium plated with wall flange screwed down, screwed for iron pipes or for brass ferrule and fixed to 15 mm bore/dia of pipe, complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and acces, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current moter (BLDC) complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and acces, 230 1400 mm sweep min air delivery 250 CFM with service value 6.00 BEE, 5 star rated with brushless direct current moter (BLDC), complete all as specified and directed.

Supply & fixing Wall Mounted Fan, heavy duty, highly stable and durable, metalic industrial air circulator fan aerodynamically designed three blade aluminium die-cast impeller to give maximum air delivery with high velocity, of 450mm sweep, 1400 RPM, 230 V AC, , complete all as specified and directed. (Make: HALONIX Model No Turbon HD AC- 450 mm or equivalent in other makes as per Appx 'C').

Supply & fixing Exhaust fan made of heavy duty metal body complete with louvers shutter, volt 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed.

Supply & fixing Exhaust fan 300 mm sweep, steel body, single phase, AC 230 Volt heavy duty, with blade frame and louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed.

Supply & fixing Exhaust fan 380 mm sweep, steel body, single phase, AC 230 Volt heavy duty, with blade frame and louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/ connector to fan terminal, fixing the fan with suitable size of nut, bolt washer, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. (Make: HAVELLS Cat No LUMILINEPLUSNEOBS20WLED865SPCSSIND/ HALONIX Cat No HLB-03-20-CW-AL-SQ/ Bajaj Cat No BCLAB 20W LED P).

Supply and fixing LED Light fitting mirror type with high output diffuser 2 feet, 1 X 10 watt 220 V AC decorative type with driver holder and LED lamp, Alluminium housing, including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make: HAVELLS Cat No LUMILINE+BS10WLED865SPCSS/ HALONIX Cat No HLB-03-10-CW-ALSQ/ Bajaj Cat No BCLSB 10W WH).

Supply and fixing LED light fitting, round shape 15 watts 220 volt AC surface type with high efficiency PMMA diffuser soft glare free light moulded in engineering plastic complete with drivers, holders, LED lamp suitable for roof ceiling including connecting of with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. (porch light). (Make: CROMPTON Cat No LCRP-15-CDL/ HAVELLS Cat No LHEBABP61Z1W015/ Bajaj Cat No BPSLR Surface 15W LED WH RD SD)

Supply & fixing LED light fitting 1 X 10 Watt Bulk Head luminaires incl LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make: CROMPTON Cat No LBHP-10-CDL/ HAVELLS Cat No RUGBYGENXFTS10WLED865SSYMBOPC/ Bajaj Cat No BIBWP 10W LED).

Supply & fixing aesthetically designed LED Wall Bracket Light fitting with B22d lamp holder including 20 Watt LED lamp 230 V AC complete all as specified and directed. (Make: HALONIX, Model No HLWB-01-B22 or equivalent in other makes as per Appx 'C').. (Decorative wall fitting)

Supply and fixing LED luminaire 600 mm X 600 mm, 35/ 36 Watt, 220 V AC recessed/ surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling incl connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. (Make: HALONIX Cat No HLFPS22-02-36-CW-R-HL1/ Bajaj Cat No BPRF 36W WH SL LED/ HAVELLS Cat No VENUSNEO2X2PLR36WLED865G2).

S&F Sheet metal enclosures VTPN as MCCB incomer and MCB SP out going 4 way 415 V AC double door surface/ flush mounting made with CRCA sheet steel, powder coated, make Indo Asian Cat No 811888 or equivalent in other makes as per Appx 'C', IP 43 protection isolated neutral bar insulated bus bar assembly complete all as specified and directed.

S&F Sheet metal enclosures MCCB TPN for mounting of MCCB 415 V AC surface/ flush mounting made with CRCA sheet steel, powder coated, complete all as specified and directed. Makes: Indo Asian Cat Part No 811985 or equivalent in other makes as per Appx 'C'

Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 125 Amp 25 KA, suitable for VTPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed. Makes: Indo Asian Cat Part No 830273 or equivalent in other makes as per Appx 'C'

Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 100 Amp 25 KA, suitable for VTPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed. Makes: Indo Asian Cat Part No 830272 or equivalent in other makes as per Appx 'C'

Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 63 Amp 16 KA, suitable for TPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed. Makes: Indo Asian Cat Part No 830240 or equivalent in other makes as per Appx 'C'

Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 40 Amp 16 KA, suitable for TPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed. Makes: Indo Asian Cat Part No 830238 or equivalent in other makes as per Appx 'C'

Supply and Fix MCCB 4 Pole, 415 Volts 50 HZ, of capacity 25 Amp 16 KA, suitable for TPN DB as incomer with spreader terminal, Ics= 100% of Icu all as specified and directed. Makes: Indo Asian Cat Part No 830236 or equivalent in other makes as per Appx 'C'

S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) with current carrying capacity of 16/20 Amp in the MCB DB complete with connection testing and commissioning all as specified and directed. Makes: Indo Asian Cat Part No 811031 / 811032 or equivalent in other makes as per Appx 'C'

S&F 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. Makes: Indo Asian Cat Part No 811018 or equivalent in other makes as per Appx 'C'

Supply & fix LED fitting for Bldg security, 20 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including connecting with 1.5 sq mm copper conductor 3 core flexible cable from fitting connector to ceiling rose and fix on wall with clamps & nut bolts and necessary Gl bracket made of 32 mm light grade Gl pipe of 1 mtr length with necessary bending complete all as specified and directed. (Make: HALONIX Cat No HLSLD-14-20-CWDL-R/ Bajaj Cat No ENXT P 20L WH PO PC SD/HAVELLS Cat No ENDURASUNDOWNSL25WLED765PASYBOPCIHD).

Suply & fixing LED Bulb 0.5 W in Red & Green colour, pin type 230V, AC complete all as specified and directed.

Supplying, installing, connecting, testing and commissioning Hi wall Split AC unit electric driven of capacity 2 TR, 220 Volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 3 Star rating and EER 3.2 based on and incl eco friendly gas R-134A including connecting lead and suitable 3 pin plug top and factory made wall mounted stand for outdoor unit complete all as specified and directed.

Suppling, installing, connecting, testing and commissioning Hi wall Split AC unit electric driven of capacity 1.5 TR, 220 Volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 3 Star rating and EER 3.2 based on and incl eco friendly gas R-134A incl connecting lead and suitable 3 pin plug top and factory made wall mounted stand for outdoor unit complete all as specified and directed.

Supply, installtion ,commissioning of water cooler electric driven single phase, fully stainless steel body having approx storage capacity 80 Litres and cooling capacity 40 Litres complete all as specified and directed.

Supply and Fix refrigerator, electrically driven (single phase) AC-230 volts, 50 Hz of capacity of 310/ 320 litrs, Double door type, frost free,minimum BEE 3 star rated including connecting lead and suitable 3 pin plug top complete all as specified and directed.

Supply, installation, commissioning of Glass Top Deep Freezer single phase 240 Volts, 50 Hz, of capacity 320 Ltrs including connecting lead and suitable 3 pin plug top complete all as specified and directed.

Supply and Fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 280 V with out put voltage stabilized at 230 V with accuracy of (+/-) 2.5 % and of capacity 1 KVA ISI marked complete all as specified and directed.

Supply and Fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 280 V with out put voltage stabilized at 230 V with accuracy of (+/-) 2.5 % and of capacity 4 KVA ISI marked complete all as specified and directed.

Supply and Fix Voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 280 V with out put voltage stabilized at 230 V with accuracy of (+/-) 2.5 % and of capacity 5 KVA ISI marked complete all as specified and directed.

Supply & Fix electric water heater, storage type steel body with storage inner tank and heating element up to 2 KW capacity 25 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, hot and cold water connection pipe, three pin plug top 15 A capacity etc, all as specified and directed.

Supply & Fix electric water heater, storage type steel body with storage inner tank and heating element up to 2 KW capacity 50 Ltrs, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, hot and cold water connection pipe, three pin plug top 20 A capacity etc, all as specified and directed.

M&L D.I. Pipes (Ductile Iron) class K-7, 150 mm dia laid in trenches all as specified and directed.

Supply & fixing Gun metal gate valve with iron wheel head screwed both ends for iron pipes & fixing; conforming to IS 778 with ISI marked grade one complete with and including jointing and jointing material like rubber sheet, nuts and bolts for the following sizes :-

80 mm bore pipe Bronze type.

65 mm bore pipe Bronze type.

S&F Cast iron sluice valve PN-1 with flanged ends as per IS:14846, 200 mm nominal bore, ISI marked complete with body, wedge, bonnet, stuffing box made out from cast iron, stainless steel spindle and cast iron hand wheel including rubber /fiber board gasket nuts, washers etc as directed.

S&F Cast iron sluice valve PN-1 with flanged ends as per IS:14846, 150 mm nominal bore, ISI marked complete with body, wedge, bonnet, stuffing box made out from cast iron, stainless steel spindle and cast iron hand wheel including rubber /fiber board gasket nuts, washers etc as directed.

Supply and fix Cast Iron Non-Return Valve, PN 1.6 with by-pass Arrangement, flanged type ISI marked 65 mm dia, (NRV) for pumpset complete all as specified and as directed.

Supply and fix cast iron Foot Valve conforming to IS 4038, 80 mm dia complete all as specified and as directed.

Supply, installing, testing & commissioning of monoblock pump set with induction motor of suitable capacity working on 3 phase, 415 volts, 50 Hz, AC supply, coupled with pump having discharge not less than 7.5 LPS and Head not less than 24 Mtr, suction size 80mm, discharge size 65mm, provision of air release valve complete all as per model No. MIP52-27 of Make Crompton, fixed on common base frame, made out of MS structure with suitable PCC foundation etc all as specified and directed.

M&L Cutting existing C.I. Mains 200 mm dia for inserting Tee special of size 200 mm x 200 mm x 150 mm for branch connection of 150 mm size including necessary C.I. Special fittings, run lead joints, excavation and earthwork in any type of strata, returning filling and removal of surplus spoils complete all as specified and directed.

Incoming (a) MCCB TPN,of capacity 32 Amps, 16KA -01 No. Ics = 100% Icu

Outgoing (a) MCCB TP, of capacity 16 Amps, 16 KA -02 No

(b) Complete power and control panel wiring with single core PVC insulated FRLS, multistranded copper conductor cable of size 2.5 /4.0 sq mm for appropriate size for MCB TPN, Starter, volt meter, Amp meter and indicating lamp for phase indication of ON/OFF indication complete. -01 Set

(c) Phase indicator LED based lamp in R,Y,B colours - 1 Set.

(d) DOL starter with sheet metal enclosure complete with contactor and over load relay with range 6-12 Amp complete - 2 Nos including suitable size of single core, PVC insulated multi stranded Copper cable of size 4.0 sq mm in flexible conduit from starter panel to motor terminal box complete all as directed.

(e) MCB SPN 16 Amp 'B' curve 10KA - 02 No's

(f) Digital VAF meter including suitable CT's ratio ON/OFF Knob -01 No.

(g) Rate quoted shall be inclusive of complete excavation and earthwork in any kind of soil as per site requirement.

M&L Construction of Fly ash bricks masonry valve pit chamber of size 1200 x 1200 x 1200 mm (depth) internal dimensions with 15 cm thick foundation using PCC 1:4:8 type D-2 over 15 cm thick hard core, built in 23 cm thick fly ash brick wall in cement and sand mortar 1:4, 15mm thick internal plaster including 50 mm thick PCC 1:3:6 bedding, 3mm thick MS sheet cover with 40mm x 40mm x 6mm MS angle iron frame fixed in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) coping with 25mm x 6mm flat iron hold fast with handle and locking arrangement including necessary painting steel surfaces with two coats of synthetic enamel paine over a coat of red oxide primer, excavation, earth work, returning & filling in type of soil and disposal of surplus soil at a distance of not exc. 50 m, complete all as specified.

M&L Road cutting for laying GI Pipe for protection of cables upto depth of 90 cm including making good the disturbed road and redressing the disturbed surfaces of road with and including filling concrete PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) complete all as specified and directed.

Supply & Fixing Energy saving street light fitting of 35/36 W, 230 volt outdoor type with high pressure die cast aluminium housing and heat resistance with seal toughned glass cover, complete with driver, lamp bracket with impact and corrision resistant including thermal management in multiple optics complete with IP 65/66 protection complete with top opening driver cover of easy maintenance interchangeable driver, electronic driver high efficient longer life, protection against high surge, high/low voltage cutoff, open/ short circuit protection and high power factor LEDs as light source including fitting & connecting new street light on pole brackets and PVC insulated cable with multistranded copper conductor of size 1.5 sq mm three core round in shape drawn through pole from pole junction box to street light fitting connector complete all as specified and directed. (Make: Halonix Cat Part No.HLSLD-14-36CWDL-R / Havells Cat Part No. ENDURASUNDOWNSL35WLED765PASYBOPC / Bajaj Cat Part ENXT P 35L WH PO PC SD.

S&F Street light pole bracket made out of 40 mm dia light grade Gl pipe 1.5 Mtr long bend to shape including necessary fixing arrangement with clamp of suitable size made out of 35 x 4 mm MS flat suitable shape to pole including nut bolt 03 nos and washer complete all as specified and directed.

Supply and fix pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 250 X 200 X 105 mm (internal ) comprising one, one No SP MCB single pole of capacity 6 Amps 240 volts and one No heavy duty connector, polycorbonate body with 04 terminal for loop in & loop out suitable for three phase street light system including fixing arrangement with bracket made out of 25x3 mm MS flat and nuts and bolts etc. all as specified and directed.

Supply, installing, testing and commissioning distribution transformer step down of outdoor type, energy efficent level -III confirming to Amendment No 01 Aug 2016 to IS 1180 (Part-1) 2014, copper wounded capacity 400 KVA, 11/0.433 KV complete, AC, 3 phase 50 Hz, oil immersed, naturally cooled, delta connected on primary side (11 KV HV side ) and star connected on secondary side (433 V) in accordance with vector symbol DYN -11 (vector Group) with neutral brought out on secondary side (LV side ) with tapping at ± 2.5%,+ 5% ± 7.5% off load tap changer gear in steps of 2.5 % including initial oil filling to appropriate level having dielectric break down strength > 50 KV, and mounted on PCC platform, with fencing and steel gate as per TD Drg CEPZ/98/TD/6 complete with all standard fitting as per IS 1180 Part -1 2014,. The unit rate of transformer includes the following accessories/ fittings:-

(a) Non Detachable rating & terminal marking plates.

(b) Lifting lugs for main tank and top cover

(c) Earthing terminals with lugs -02 Nos

(d) Thermometer pocket with cap, alongwith dial type thermometer -01No

(e) Externally hand operated off circuit tap changing device with locking arrangement

(f) Oil conservator tank with oil filling hole & cap and oil level gauge.

(g) Silica gel dehydrating breather with first charged silica gel.

(h) Top filter Valve with plug.

(j) Drain cum bottom filter valve with plug.

(k) Air vent, Explosion vent, Fings etc.

(l) Unidirectional reversible roller -04 Nos

(m) HV bushing -03 Nos

(n) LV bushing -04 Nos

(o) First fill oil.

(p) Base channel 100x50xmm, 460 mm Long with hole to make them suitable for fixing on a platform or plinth including making locking arrangement.

(q) First fill of fresh oil confirming to relevent IS and tested upto 50KV dielectric stregth.

(r) Extra bushing for neutral outside the L.T cable box for providing independent earthing for neutral.

(s) Provision of 2 Nos danger boards 250x200 mm size made out of 1.6 mm thick M.S. plate, Vitreous enamelled white, with letters figure of voltage and conventional skull and bones in signal red colour, one at HT side and other on LT side.

(t) Any other fitting /accessories so as to confirm the whole transformer to IS 1180: 2014.

BLANK

Supply and fix Gang operated air break switch of load disconnecting switch, 11 KV, 200 Amp with 12 Insulators, triple pole ,each pole consisting of galvanised steel base HT insulator as per BSS/ISS non ferrous knife and screen loaded contact, arching arms of adquate section to break magnetising current tilting type complete with square shaft of GI, adequate length for phase separation, operating handle complete with locking arrangement with lock and key in both OFF and ON position, with suitable clamps, nuts bolts complete for fixing only channel, making all electrical connection /jumpers with bottle lugs, commissioning and testing complete along with supply and fix new drop out expulsion fuse HT 11 KV rating of upto 50 Amp mounted on insulator and steel frame complete all heavy fuse barrel with fuse element complete set confirming to IS: 1818 as specified and as directed.

Incoming

(i) ACB 4 pole 415 V, with Thermal Magnetic Ralease (Manual Drawout type) 630 Amp 50 KA - 01 No.

(ii) Astronomical time swith provided with 250 mA fuse unit externally at the input including power contactor ML 1.5, 3 pole with coil voltage 230 VAC for automatic street light ON/ OFF fitted inside steel enclosure - 01 No.

Outgoing

(i) MCCB,4 pole, 250 Amp adjustable Type, Ics =100 % Icu,415V, 50Hz with breaking capacity 36KA, - 01 No (Panel No-3).

(ii) MCCB,4 pole, 200 Amp adjustable Type ,Ics =100 % Icu, 415V, 50Hz with breaking capacity 36KA, 01 No (Panel No-1).

(iii) MCCB 4 pole 125 Amp adjustable Type, Ics = 100 % Icu, 415V, 50Hz with breaking capacity 25KA, 01 No (Panel No-2).

(iv) MCCB 4 pole 25 Amp adjustable Type,lcs =100% Icu, 415V, 50Hz with breaking capacity 16KA, - 01 No (For Pump House).

(v) MCB, 4 pole 16 Amp, 'B' curve 10 KA-01 No (Street Light).

(vi) MCB SPN 10 Amp, 'B' curve 10 KA-02 No (for Sentry Post).

(vii) Digital VAF meter including suitable CT ratio's ON/OFF Knob -01 No.

(viii) Phase indicator LED based lamp in R,Y,B colours.

(ix) Space for Mounting MCCB 4 pole 100 Amp (spare for phase II) - 01 No.

(x) Space for Mounting MCCB 4 pole 63 Amp (spare for phase II, foot ball ground load) - 01 No.

Incoming

(i) MCCB,4 pole, 200 Amp adjustable Type, Ics =100 % Icu, 415 V, 50 Hz with breaking capacity 36 KA, - 01 No.

Outgoing

(i) MCCB 4 pole 63 Amp adjustable Type, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 16 KA - 02 No (For Single JCO's Accn).

(ii) MCCB 4 pole 25 Amp adjustable Type, lcs =100% Icu, 415 V, 50 Hz with breaking capacity 16 KA, - 01 No (Tradesman Shop).

(iii) Digital VAF meter including suitable CT ratio's ON/OFF Knob -01 No.

(iv) Phase indicator LED based lamp in R,Y,B colours.

(v) Space for Mounting MCCB 4 pole 63 Amp (spare for phase II, Single JCO's Accn) - 01 No.

(vi) Space for Mounting MCCB 4 pole 40 Amp (spare for phase II, Single JCO's Accn) - 01 No.

Incoming

(i) MCCB,4 pole, 125 Amp adjustable Type, Ics =100 % Icu, 415 V, 50 Hz with breaking capacity 25 KA, - 01 No.

Outgoing

(i) MCCB 4 pole 63 Amp adjustable Type, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 25 KA - 02 No (For Single OR's Living & JCO Mess).

(ii) MCCB 4 pole 40 Amp adjustable Type, lcs =100% Icu, 415 V, 50 Hz with breaking capacity 16 KA, - 01 No (Single OR's cook house & Dining).

(iii) MCCB 4 pole 25 Amp adjustable Type, lcs =100% Icu, 415 V, 50 Hz with breaking capacity 16 KA, - 01 No (Drying and Ironing).

(iv) SPN MCB of capacity 16 Amp, 'B' Curve 10 KA - 01 No. (Storage Accn)

(v) Digital VAF meter including suitable CT ratio's ON/OFF Knob -01 No.

(vi) Phase indicator LED based lamp in R,Y,B colours.

Incoming

(i) MCCB,4 pole, 250 Amp adjustable Type, Ics =100 % Icu, 415 V, 50 Hz with breaking capacity 36 KA, - 01 No.

Outgoing

(i) MCCB 4 pole 125 Amp adjustable Type, Ics = 100 % Icu, 415 V, 50 Hz with breaking capacity 25 KA - 01 No (Office & Adm Block).

(ii) MCCB 4 pole 100 Amp adjustable Type, lcs =100% Icu, 415 V, 50 Hz with breaking capacity 25 KA, - 01 No (For Education Block).

(iii) MCCB 4 pole 63 Amp adjustable Type, lcs =100% Icu, 415 V, 50 Hz with breaking capacity 16 KA, - 01 No (Heritage & Motivation Hall).

(iv) SPN MCB of capacity 20 Amp, 'B' Curve 10 KA - 01 No. (Car parking shed for 06 cars)

(v) SPN MCB of capacity 10 Amp, 'B' Curve 10 KA - 01 No. (Car parking shed for 02 cars)

(vi) Digital VAF meter including suitable CT ratio's ON/OFF Knob -01 No.

(vii) Phase indicator LED based lamp in R,Y,B colours.

(viii) Space for Mounting MCCB 4 pole 100 Amp (spare for phase II load) - 01 No.

S&F Cable route indicator made out of RCC in M25 (Design Mix) of size 450 mm above ground level finished even and fair with and including 10 mm cement plaster in 1:6 embedded upto 350 mm in ground in PCC 1:4:8 Type D2 and marked / written for 'MES 11KV HT CABLE" including indicating direction with and including painting with two coats of syntetic enamel paint over a coat of primer to exposed surfaces complete all as specified and shown in drawing No. CEPZ/2023/TD/01 sheet 1/1.

S&F New generation LED Post-Top laltern, energy saving, environment friendly, long life asthetically designed with symetrical light distribution, spun aluminium landscape luminaire with IP-65 protection with and including 15/20 Watt LED as light source complete all as specified and directed. (Make: Havells Cat Part No. RUBYMINIPT15WLED757PSYMTOPC / Halonix Cat Part No. HLPT-S04-15-CW / Bajaj Cat Part No. BGCTNP 20W LED WH).

S&F sheet metal enclosure for mounting MCB TPN, 4 module, surface/ flush mounting made with CRCA sheet metal all as specified and directed. Makes: Indo Asian Cat Part No. 811982 or in other makes specified in Appx 'C'.

Providing and applying thermoplastic reflective paint of any colour as approved for traffic lane strips 100/150 mm wide & 2mm thick pigment 10% on clean dry and good road surface with 10% glass beads, 20% binder, 10% extender and 60% of filler materials all as per IRC specifications complete all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

S&F Cat eye solar reflective type of metal body alloy of size 10mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972 fixed with and incl MS stud of suitable size as per manufacturer's instructions complete all as specified and directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystafine solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions complete all as specified and directed. (Makes - Siddhi Vinayak Enterprises / Road Safety Mark / Dark Eye / Alaxius / 3M / Greenlite).

K R TRADERS

Garima Construction Co

United Sales Corporation