Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Pipple under JJM

Amount

THILLI TO PIPPLE

Providing, installation, testing and commissioning of 10000 GPH x 230 meter head HC pump coupled with suitable rating prime mover and allied works by way of surveying of site, designing of machinery in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of site 6’x3’x4’ by using TMT steel of 10mm dia steel mesh by using steel bar. The foundation block as per site of pump set having additional margin of 6” on all sides. The foundation block can be combined for all the pumps which must include space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 150 mm dia suction pipe line alongwith fabrication of common suction manifold with 150 mm dia pipe as per site requirement and connection with the pumping units including p/f of MS expanders / MS reducers/ MS dismantling joints/ MS saddles, MS flanges, CI sluice valve 150mm dia (separate for each suction line) alongwith nuts, bolts, washers, gaskets as per size and specification of suction line. Providing, fabrication and laying of delivery pipe line of 100 mm dia alongwith providing and fitting of MS pipe, bends, MS expanders / MS reducers/, MS dismantling joints/ MS saddles/ MS flanges, Cast steel (class 300) NRV 100mm and sluice valve 100mm dia alongwith providing and fitting of nuts, bolts, washer, gaskets, flanges etc. Making of inter connection of delivery lines with common rising main by providing and fabrication of 150mm dia pipe common delivery manifold. Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house. Job includes providing of maintenance tool kit as per enclosed annexure alongwith 3 phase welding set (1no), chain pulley block (1no.) 3 ton capacity , 01 no. folding bed, 04 no. chairs, one no. fan and 01 no. steel almirah. Job includes providing / fitting and laying of copper cable 50mm2 single core multi-strand from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 70mm2 copper cable single core multi-strand upto MCCB in four leads and further upto voltage stabilizer in four leads approximately 30 meters in length conforming to ISI standards complete with proper thimbling and insulation material. Job covers providing and fitting of 250 ampere MCCB of 50KA breaking strength. Proper earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc

Providing, carriage, installation, testing and commissioning of 3 phase, 150 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 12 gauge container chamber alongwith allied works at WSS Pipple. Job includes providing of 150 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of 3.5 core armoured Al. cable of 185mm2 from electric pole to main switch approximately 50 meters length and providing and fitting of copper cable single core multistrand 70mm2 approximately 20 meters from main switch to voltage stabilizer conforming to ISI standards complete with insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.

PIPPLE TO BADHOTA AND UPPER PIPPLE

Providing, installation, testing and commissioning of 5000 GPH x 100 meter head HC pump coupled with suitable rating prime mover and allied by way of surveying of site, designing of machinery in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of site 6’x3’x4’ by using TMT steel of 10mm dia steel mesh by using steel bar. The foundation block as per site of pump set having additional margin of 6” on all sides. The foundation block can be combined for all the pumps which must include space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 80 mm dia suction pipe line as per site requirement (separate suction line and valves for each pumping unit) including MS expanders / reducers, MS dismantling joints, MS saddles, MS flanges CI sluice valve 80mm dia and foot valve 80mm dia alongwith nuts, bolts, washers gaskets as per size and specification of suction line. Providing, fabrication and laying of delivery pipe line of 80 mm dia alongwith providing and fitting of MS pipe, bends, MS expenders / reducers, MS dismantling joints, MS saddles, MS flanges, cast steel (class 150) NRV 80mm and sluice valve 80mm dia alongwith providing and fitting of nuts, bolts, washer, gaskets, flanges etc. Making of inter connection of delivery lines with common rising main by providing and fabrication of 100mm dia pipe common delivery manifold. Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house. Job includes providing of maintenance tool kit as per enclosed annexure alongwith, chain pulley block (1no.) 3 ton capacity, alongwith ISMB-100 for lifting of pumping machinery 01 no. folding bed, 04 no. chairs, one no. fan and 01 no. steel almirah. Job includes providing / fitting and laying of copper cable single core multi-strand 16mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 25mm2 copper cable single core multi-strand upto MCCB in four leads and further upto voltage stabilizer in four leads approximately 30 meters in length conforming to ISI standards complete with proper thimbling and insulation material. Job covers providing and fitting of 63 ampere MCCB of 50KA breaking strength. Proper earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc.

Providing, carriage, installation, testing and commissioning of 3 phase, 63 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber alongwith allied works at WSS Pipple. Job includes providing of 63 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of 3.5 core armoured Al. cable of 50mm2 from electric pole to main switch approximately 50 meters length and providing and fitting of copper cable 25mm2 single core multi-strand approximately 20 meters from main switch to voltage stabilizer conforming to ISI standards completed with required insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc.