SPECIAL REPAIR TO BLDG NO 40/41 (COOK HOUSE), BOUNDARY WALL NEAR BLDG NO P-242 (RAM GASS AGENCY), BOUNDARY WALL INCLUDING BARBED WIRE (ARCOT LINE) AND CERTAIN MINORT WORK UNDER AGE B/R-IV OF GE(SOUTH) MEERUT CANTT

Amount

Surface dressing n. exc 15 cm deep including site clearance in soft/loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth in soft/ loose soil for foundation for manholes n.exc 10 Sqm on plan, including levelling of bottom surface to required level getting out complete all as specified and directed.

Removing excavated soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm thick in soft / loose soil complete all as specified and directed.

Material and labour for hardcore of broken bricks of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and Labour for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation fillings and mass concrete including necessary form work complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundation complete all as specified and directed.

Material and labour for use and waste formwork to sides of concrete foundation, footings, bases of column, rafts, plinth beams and similar work vertical or to batter for rough finished flat surface of concrete , complete all as specified and directed.

Material and labour for use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions to give rough finished flat surface of concrete complete all as specified and directed.

Material and labour for form work to sides and soffits of beams lintels etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour form work to the edge of concrete flat n.exc 200 mm thick , rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 13.00 above but 6mm to 8mm dia as in stirrups/rings complete all as specified and directed.

Material and labour for providing reinforced cement concrete , M-25 design mix (using 20 mm graded crushed stone aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete including necessary form work complete all as specified and directed.

Material and labour for providing reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for providing reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregates) as in beams, lintels over 1.5m span etc complete all as specified and directed.

Material and labour for providing reinforced cement concrete M-25 Design Mix , 1:2:4 (using 20 mm graded crushed stone aggregates) in roof slabs supported on wall, beams etc complete all as specified and directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 19.00 above but except brick complete all as specified and directed

Supply and fix bib taps, cast copper alloy chromium plated ,long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

Material & labour for 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

Material & labour for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work or stone masonry surfaces, finished even and smooth without using extra cement mixing with WPC complete all as specified & directed. Note- WPC shall be measured and paid separately.

Supply and fix 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed

Supply and fix reinforced concorete pipes, class NP3 600mm dia laid and jointed with coller complete all as specified and directed

Material and labour for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 20mm thick on fair faces of concrete surfaces, finished even and smooth on roof in cement mortar (1:4) complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base floor, finished even and rough to receive floor topping all as specified and directed.

Material & labour for plain cement concrete bed to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) for 150 mm bore pipe complete all as specified and directed.

Material and labour for coloured Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and and directed

Material and labour for cloured Glazed ceramic tiles in vertical surfaces 350x250x7mm / 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or cloured cement to match over and including 10mm thick rendering in CM (1:4) on fair faces of brick or concrete surface complete all as specified and directed.

Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) in path /plinth protection, finish cement concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying three coats of white washing complete all as specified and direcrted.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and direcrted.

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen, over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.60 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Material and labour for gauzed shutter made out from mild steel 'U' frame 35x35x5mm, 25x25x5mm and 1.5 mm thick as shown on drawing, the frame for shutter shall be of pressed steel and 10 mm square bars grill complete with fly proof wire mesh having 0.63mm nominal dia wire and 1.4 mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates, etc profile of frame 125x60mm made out of 1.25 MS sheet including one shop coat of primer complete all as specified and directed.

Material and labour for flat iron hold fast 25mmx6mm welded to iron door frame complete all as specified and directed.

Material and labour Mild Steel angle iron door frame 40mm x 40mm x 6mm conforming to Fe-410-0 incl 12mm dia deformed bars for strengthening at bottom of chowkhats complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC, ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles, cast type, anodised complete all as specified and directed.

Supply & fix 150mm long aluminium anodized tower bolts of extruded section complete all as specified and directed.

Supply & fix 200mm long aluminium anodized barrel tower bolts of 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

Supply and fix 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix MS 300mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer all as specified and directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply and fix 100/125mm dia CP grating complete all as specified and directed.

Supply & fix for 110 mm bore PVC floor traps plain with grating and 300 mm long out let inlcuding jointing with cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply & fix steel window box type using ERW 'P' section comprising double frame for gauged and glazed skeleton shutter jointed internally with flat iron 40x3mm all arround the complete frame including iron mongry etc complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit . (ii) Glazing and wire gauge shall be measured under respective item of BOQ

Supply & fix steel window or ventilators fixed with glazing bars complete all as specified and directed.

Supply & fixing mild steel framed work such as grills or framed guard bars with end of bars shouldered or reveted or forged into spike, and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.

Supply & fix 20 mm bore gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete all as specified & directed.

All as per item No 57.00 above but 15mm bore complete all as specified and directed.

Supply and fix vitreous china wash hand basin, white, flat back of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and CP brass waste coupling complete all as specified and directed.

Supply and fix angular valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tank triple layers(cylindrical, vertical with closed top) 500 litre capacity hoisted and fixed in position complete all as specified and directed.

Supply and fix PVC low level duel flushing cistern 9-10 Ltr capacity white with inlet, ball valve, float , handle ,brackets and 32 mm dia PVC flush pipe for low level cistern complete all as specified and directed.

Supply and fixing for 15mm bore, GI tubes medium grade, galvanised, with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply and fixing for 20mm bore, GI tubes medium grade, galvanised with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply and fix 3 mm thick plain sheet glass ordinary quality and glazing with oil putty / beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for 3mm thick sheet glass, pin headed and glazing with oil putty beading/rubber beading in squares not exceeding 0.50 sqm each pane complete all as specified and directed.

Supply and fix galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples including necessary beadings complete all as specified and directed.

Supply and fix butt hinges 100mm size, stainless steel heavy quality incl necessary screws complete all as specified and directed.

Supply and fixing PVC connections of 450mm long suitable for 15mm dia iron pipe incl PTMT nuts complete alll as specified & directed.

Supply and fix 20 mm bore, PVC ball valves, high pressure with polyethylene float and fly nut, including epoxy coated aluminium rod, screwed for iron pipe or for brass ferrule complete all as specified and directed. ( Min Wt:- 210 Gms).

Supply & fix vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest,Cast iron ‘P’ or ‘S’ trap, lime concrete bedding complete all as specified and directed.

Supply and fix 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe fixed complete all as specified and directed.

Supply and fix 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches/ laid under floor complete all as specified and directed

Supply and fix in repair galvanised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strainghting bolts including securing or typing at crossing with and provn of galvanised MS wire staple or steel pins etc as directed.

Supply & fix PVC (SWR), junction single, equal or unequal 110mm bore complete all as specified and directed.

Supply & fix tubular towel rail of 20mm dia of brass, chromium plated, ’D’ type, 600 mm long between flanges complete all as specified & directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 50mm thick PCC 1:2:4 type B-1 (20mm graded crushed stone aggregate) finish even without using extra cement complete all as specified and directed.

Material and labour for 50mm thick 1:2:4 type B-0 (12.5 graded crushed stone aggregate) as in copings including necessory form work etc complete all as specified and directed.

Material and labour extra forming fair finished drain or channel 30 Cm inner girth in cement concrete , using extrac cement complete all as specified and directed.

Material and labour for providing precast cement concrete 1:2:4 (20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah huuds, chajjs , water troughs, mangers, shelves and similar articles with pain faces complete all as specified and directed

Supply and fix rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including dismantling taking down old trues member conf to Fe-410-W (Gde-E-250) quality 'A' complete all as specified and directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

All as per item No 84.00 above but plaint sheet complete all as specified and directed.

Material & labour for 150 mm bore salt glazed stoneware drain pipes laid in trenches and jointed in cement mortar (1:1) using hemp yarn socked in thick cement slurry all as specified and directed.

Taking down of chowkhats or frame with shutters without taking off shutters from the frames exc 1.50 Sqm & n exc 4.00 Sqm each complete all as specified & directed.

Taking down of chowkhats or frame with shutters without taking off shutters from the frames n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutter of any description exe 2 Sqm each complete all as specified & directed.

Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, with overall length of cover plate as 140mm long, complete all as specified & as directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fix plain galvanised mild steel sheeting 0.63 mm thick in ridges, hips, valley gutters, drips and straight flashing class-VIII ( having zinc coating 180gm/Sqm) complete all as specified and directed

Supply and fix mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to Fe-410 Gde-310 complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Demolition of cement concrete in ground floors and paving n.exc. 15 cm thick (below or above ground level) complete all as specified & as directed by Engr-in-Charge.

Material and labour for Machine cut kota stone slab flooring incl 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete laid over and including screed bed or bedding layer of mortor 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed.

Material and labour kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including CM 1:4 all as specified and directed.

Material and labour for preparation of old surface of walls and applying two coats of cement base paint complete all as specified and directed.

Supply and fix 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Material and labour for writing letter or figures (block, italic or indian) not exc 30cm high complete all as specified and diriected.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed.

Supply and fix joist, channel, angle ,or tee sections, fixed independently including drilling holes, without connecting plates etc (cut to ordinary lenghts i.e. within 20mm of the length indicated) conforming to Fe-410-0 or 310-0 complete all as specified and directed

Material and labour for sub main wiring with 4.00 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS cable with and including continuous earth wire of size 4.00 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : One meter of conduit along with 2x4.00 sqmm wire and one 4.00 sqmm earth shall be measured as one unit length )

Supply and fix decorative LED batten 20 Watt aluminium housing integrated type compete with all accessories and fixing material all as specified and directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white/colour washing/distempering etc to match the existing surfaces complete all as directed .

Taking down carefully any type of battens or conduit point wiring with batten / conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly for One tube light/Bulb/Bell/ street light point controlled by one, one way switch 05/06 Amps complete all as specified and directed.

All as per serial item No 107.00 above but for one ceilling fan/exhaust point controlled by one, one way switch 05 / 06 Amps.

All as per serial item No 107 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 107.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per serial item No 107.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05/06 Amp single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fix socket outlet 3 pin, 05/06 Amp 240 volts complete all as specified and directed .

Supply and fix socket outlet 5 pin, 05/06 Amp flush type 240 volts complete all as specified and directed.

Supply and fix socket outlet 3 pin, 05/06 Amp and 3 pin 15/16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed .

Supply & fixing switch piano, flush type, 15 / 16 Amps, single pole, one way, 240 volts complete all as specified & directed.

Supply and fixing steped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts with and including connector complete all as specified & directed by Engineer-in-Charge

Supply and fix lamp holder (Angular/Straight), insulated body, with back plate for batten fitting all as specified and directed by Engineer-in-Charge.

Supply and fixing lamp holder, PVC /polycarboante type back plate suitable for batten fitting complet with 1xLED lamp 10 Watt complete all as specified and directed.

Supply and fixing LED lamp 9 watt.

Supply and fix decorative LED tube light fitting 1x10 Watt, surface mounting, wite powder coated CRCA sheet housing with opal diffuser and decorative end plates complete with rod and all acessories as specified and directed.

Supply and installed LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with PC cover in frame with high power LED white lampt type of capacity 45 Watt security light brackets of 32 mm dia GI pipe medium grade upto 0.8mtr long bend to shape at 100-120 degree including flat iron clamps and suitable nuts and bolts grouted n wall including al lmeterial required for fitting complete all as specified and directed

All as per item No 122.00 above but 30 Watt complete all as specified and directed.

Supply & fixing of ceiling rose 3 terminal PVC / poly carbonate, isolated body complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "C" curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

All as per item No 127.00 above but MCB SPN 32 Amp complete all as specified and directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc including taking out old LT cable any size complete all as specified and directed.

Supply/laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired result of earthing is not obtained the earthing shall be redone without any extra cost to Govt.)

Supply and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 Watt, complete with all acessoires all as specified and directed.

M/S YAVAV CONSTRUCTION CO.

vibha associates