REPAIR TO CHAJJA, PLASTERING, MASONRY, ROOF SHEET, RWP AND CONNECTED WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 is to be finished even and smooth (with out using extra cement)using of all scaffolding, trestles, ladders, cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer & chalk whiting using of all scaffolding, trestles, ladders, cradles which are necessary for execution of work and protective measures including cleaning glass,joinery,electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy all as specified & directed by the Engr-in-Charge.

M&L Rendering 15 mm thick mixed with water proofing compound as per manufactures instruction on fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth (with out using extra cement) using of all scaffolding, trestles, ladders, cradles which are necessary for execution of work and protective measures including cleaning glass, joinery, electric fitting, wiring etc of drops and splashes and leaving premise, clean and tidy complete all as specified and directed Note :- Liquid water proofing compound to be measured under separate item as supply only.

Supply only integral water proofing compound.

M&L preparation of newly plastered surfaces of walls and finishing walls with two coats cement base paint over a coat of primer complete all as specified & directed.

M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar as in directed.

M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as in ceiling to be finished even and smooth (with out using extra cement) using of all scaffolding, trestles, ladders, cradles which necessary for execution of work & protective measures including cleaning glass, joinery, electric fitting etc of drops and splashes and leaving premise,clean and tidy complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and three coats white wash complete all as specified & directed.

Taking down plaster from chajja/facia etc including dismantling of damaged concrete and repair the same with RCC (1:2:4) type B1 concrete on chajja of any width n.exc 60 cms, applying 10mm thick plaster in CM 1:3 mixed with WPC @3% by weight of cement (WPC shall be measured and paid for separately) and applying two coat of cement base paint with primer to match the existing, finished even and smooth using extra cement with out extra cost all as specified and directed by Engr-in-charge.

M&L for pressure grouting. Treat the leakages by doing pressure grouting, forcing PVC nozzles along the length of cracks in zigzag manner, Inject non shrink cementitious grout through PVC Nozzle in the slab by a grout pressure pump, Allow it top cure as per standard practice, Cementious grout shall have a compressive strength of 50 Mpa at 7 days, 65 Mpa at 28 days confirming to ASTM C 109:99 all as specified and directed by Engr-in-charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards, slabs, blankets, any thickness, including cover fillets.

S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling including Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including 8mm thick gypsum ceiling tiles with front PVC laminated & back Aluminium foil, Ceiling board of dimension 595X595mm with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre grid complete all as specified and as directed. Make: Diamond or as equivalent as approved by GE.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid ,bedded and pointed in any mortar all as specified and directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick Screed bed or bedding layer of mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L 15-20 mm thick Sadarahalli Stones slab (of any type), any colour, Polished bedded over cement screed bed 10mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

Taking down Chowkhats or frames (without taking off shutters from the frame) n exc 1.5 sq. complete all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete as specified and directed by the Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

Supply and fix 75 mm size medium weight cold rolled sainless steel butt hinges complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 100 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 100 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix alluminium alloy, anodized sliding door bolts 150 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete of any description laid in any position and remove the debris out MOD land complete all as specified and directed.

M&L for 75 mm thick cement concrete type C2 (1:3:6) (using 20mm graded aggregate) as in plinth protection in alternate bays not more than 3.0 mtr length with joints between panels is 12mm wide will be filled with1 part of heated bitumen 85/25 grade and 3 parts of sand complete all as specified and directed.

M&L for PCC flooring work 40mm thick type B1 1:2:4 (20mm graded aggregate) finished even and smooth using extra cement as directed.

M&L 25 mm thick PCC (1:2:4 ) type B0 using 12.50 mm graded stone aggregate as in floor complete all as specified and directed.

M&L Double charged Vitrified Ceramic tiles of any shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm and n exc 1.00 Sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Double charged Vitrified Ceramic tiles of any shade 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm and n exc 1.00 Sqm with 10mm thick screed bed or bed layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles of light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Vitrified Ceramic tiles of light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling & terrazoo including cement mortar bedding (but not backing) and rubbish off the premises.

M&L Rendering 10 mm thick in cm 1:4 for dado / skirting on brick /stone massonry surface finished fair and even for receiving tiles in vertical surfaces complete all as specified and directed.

M &L Glazed Ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and directed.

Removing excavated/demolished material exc 500 m n.exc 1.5KM or out of MOD land and depositing where directed at a level n.exc 1.5 km above the starting point

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

All same as item above but 20 mm bore.

All same as item above but 25 mm bore.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

All same as per item above but 20 mm dia

S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and directed.

All as per item above but 20mm bore.

Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting of Stone/Brick massonry wall for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F Stop valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F Concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs complete all as specified and directed.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed.

S&F in repairs brass CP two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

S&F brass CP shower rose with arms 75 mm size fixed to pipe all as in repairs complete all as specified and directed.

S&F brass 3 way CP mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent

Dismantling of existing broken PVC 500-1000 ltrs water tank complete all as specified and directed.

S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks incl suitable nipple( cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and directed.

All as per item above but capacity of 1000 ltrs

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe complete all as specified and directed.

S&F Bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) and fixed in repairs complete all as specified and directed.

All as per item above but with long body. (Minimum weight 15mm-120gms)

Supply and fix 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) in repairs complete all as specified and directed.

S&F 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) and fixed in repairs complete all as specified and directed.

S&F 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) and fixed in repairs complete all as specified and directed.

Supply and fix vitreous china ware wash hand basin 550mm x 400 mm size, white, flat back or angle including removing the existing one complete and refixing with new bracket as in repairs and making good all connections.

Supply and fix 32 mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and directed.

Supply and fix vitreous china squatting pan orissa pattern size 580 mm x 440 mm white with integral foot rests complet in repairs, including provision of concrete bedding all as directed by Engineer-in-Charge.

Supply and fix vitreous china wash down water closet pan (Pedestal type), white including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F in repairs white /black plastic seat cover anglo indian type/ IWC type solid confirming to ISI any type complete all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm and fixed in repairs complete all as specified and directed.

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs complete all as specified and directed.

S&F in repair Vitreous china urinal,half stall type in white colour complete all as specified and as directed

S&F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) and fixed in repairs complete all as specified and directed.

S&F Swivel shower of PTMT any colour for fixing with 15mm pipe Shower arm 15mm, 195mm long and 45 degree bend (Min wt 40g) and fixed in repairs complete all as specified and directed.

S&F Towel Rail 600mm long fixed and including Chromium plated brass screws and wooden plastic cleats and fixed in repairs complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)and fixed in repairs complete all as specified and directed.

S&F 32mm Dia PVC waste pipe for urinal, sinks or wash basines etc,. in repairs complete all as directed by the Engr-in-Charge.

S&F PVC toilet cup board cabinet, with shutters having mirror on shutter of size 47cm x 35cm x 15cm complete all as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

S & F Sheet glass shelf for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and directed.

S & F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed.

Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S & F stainless steel kitchen sink 304 grade with draining board made of stainless steel 1mm thick,coupling plug , washers and waste pipes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 940 mm X 460 mm and bowl size 405X354X203 mm, including taking down old sink with dranage board complete all as specified and directed.

S&F sinks 304 grade without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings complete all as specified and directed.

S&F chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

S&F Soft close seat cover for EWC (wall/floor mounted) for any shape or size complete all as specified & directed by EIC

Demolition/Dismantling of drain or waste pipes on floor or in wall any dia complete all as specified and directed.

S&F 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and directed.

S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and directed.

S&F 75mm bore PVC(SWR) Pipes single socketed, bend in any length with rubber ring joints laid in trenches or in floor/ wall complete fittings (leakproof joints)complete all as specified and directed.

S&F 110mm bore PVC(SWR) Pipes sinle socketed, bend in any length with rubber ring joints laid in trenches or in floor/ wall complete fittings (leakproof joints)complete all as specified and directed.

S&F PVC (SWR) junction (Single T) 110mm equal or unequal in repairs complete all as specified and directed.

Ditto as item above but 75mm dia

S&F stack clamps for 110 mm dia PVC(SWR) pipes of 50mm x 5mm flat iron and 16mm dia round iron stay bolts and nuts and securing ends of stays to wall and roofs, fixed in repairs complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 all as in repairs complete all as specified and directed.

S&F PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement all as in repairs complete all as specified and directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm with 10mm thick screed bed or bedding layer in CM 1 : 4 for skirting in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

saradhi construction combines

K LAKSHMAN SINGH AND CO

M/S DIVIJA BUILDERS

VACON INFRASTRUCTURES

BHEEMRAO PATIL CONTRACTOR

M/S P.SWAROOP KUMAR

NEWS CONSTRUCTIONS