Construction of transformer shed and providing barbed wire fencing on compound wall at Swimming pool at Sada, Vasco.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW, APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a)All Kinds of soil.

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a)All works upto plinth level

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge

Providing and fixing GI barbed wire fencing 0.75m high with angle iron post 40mmx 6mm to form Y section placed every 3m c/c grounded in M15 grade cement concrete 0.30x0.30x0.50 by demolishing laterine mass in compound wall. Providing barbed wire lengthwise in 5 rows and rounding barbed wire around the barbed wire provided length wise fixed with GI staples, turn buckles etc.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint. Using M.S. angles 40 mm x 40 mm x 6 mm for diagonal braces.