Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.9 LAccepted-AOC | L1 | Accepted-AOC L1 and reasonable | |
| 2 | L2₹25.1 L+₹2.2 L (9.77%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹23.2 L
EMD Value
₹46,400
Closing Date
5 Mar 2020, 6:00 pmClosed
CWE Shimla Hills Jutogh
CWE Shimla Hills Jutogh Jutogh Cantt Shimla - 171 008
SPECIAL REPAIRS TO ROAD FROM MH-09 GATE No.2 TO CHARRING CROSS AT DAGSHAI CANTT AND TO INTERNAL ROAD OF MIL HOSPITAL AND MH OFFICERS MESS AT KASAULI CANTT UNDER GE KASAULI.
2020_MES_318713_1
CA NO CWE/KAS-55 OF 2019-20
Open Tender
Civil Works - Roads
Item Rate
180 days
Kasauli
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE kasauli
₹46,400
Yes
11 Apr 2020
28 Jan 2020
13 Mar 2020
28 Jan 2020
5 Mar 2020
20 Feb 2020
Amount
Repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edge to at least 25mm in depth making good by applying tack coat @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, blinded with 0.09 cum of stone chippings 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mm complete all as specified.
Repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edge to at least 25mm in depth making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified.
Applying evenly a priming coat of paving bitumen of grade VG-10 @ 10Kg /10 Sqm complete all as specified.
Preparing surface of black top by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified.
Applying evenly a priming/tack coat of paving bitumen of grade VG-10 @ 5Kg /10 Sqm on black top surface complete all as specified.
Premix bituminous macadam (consolidated thickness 75mm or less) with binder content 4% by weight of total mix, rolled with 8 to 12 ton power road roller and compacted to required camber, gradient complete all as specified and as directed.
Bituminous pre-mixed asphaltic dense concrete 40mm consolidated thickness, with 6% binder content by weight of total mix, using paving bitumen of VG 10, spread,rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified. Note : (i) Automatic hot mixing plant of adequate capacity shall be used for heating and mixing of aggregate, bitumen etc for premix dense asphaltic concrete and mix for both items shall be laid with mechanical pavers. (ii) Quantity of bitumen in dense asphaltic concrete shall be used as per design mix and shall be approved by the GE. Any variation in quantity of bitumen in desigm mix shall be priced as specified in the particular specification through deviation order. Unit rate quoted shall deemed to include the cost of design mix.
Solar road studs having 3 LEDs of colours red/yellow to a side (total 6 Nos) housed in a tough pressure die cast aluminium alloy of size 125x125x20 mm with built in stem nail 37x37x55 mm long for fixing with epoxy, LED solar cells, battery and light sensor well protected inside under tough unbreakable transparent sheet roof system workable for 2-3 days (nights) after full charge of 8-10 hours fixed in repair complete all as specified. Make : Greenlite / 3M / Darkeye / Suneyez/ Sparkeye
Acrylic directional delinator having 100 mm dia cube corner high intensity reflector (signal red/yellow/white) holded in strong plastic ABS body mounted over CRS steel tube 47 mm dia of 16 gauge sheet support, total height 600 mm having flared/welded foot for firm grip to base, acrylic reflector & ABS body protected in a weld mesh cage, all parts stove enamelled and baked to 120 degree C to make all weather resistant, vertical support tube to have a plastic sheet reflector all around complete all as specified. Make : Greenlite / 3M / Darkeye / Suneyez/ Sparkeye
2.5mm thick road marking strips (reflective) of specified shade colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, gum beds dispenser propane tank healers and profile shoe heater drivern by skilled operator on road surfaces including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc as per applicator specifications complete all as specified.
Rajesh Agencies
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .