CC construction work from behind the temple to Sukhveer Singhs house in Diamond City, Gwalior Road.

Excavation in foundation in ordinary Soil (Loam, Clay or sand) including, lift upto 1.50 M and lead Upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as per directed by the Engineer-in-charge up to a distance of 30 M from the foundation trenches.(CH-4 Item No. 251 PWD SOR-2023-24)

Providing and laying cement concrete in 1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work in foundation and floors. (DSR No. 4.1.8/2023)

Class-150 (Non Modular) brick work in 1:4 (1 Part Cement : 4 Part Coarse Sand) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. (DSR-2023/6.1.1)

12mm Thick cement plaster 1 cement : 4 Coarse sand (Item No. 13.4.1 DSR-2023)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with mortar grader surface, mixing by mix in place method with rotavator at OMC, & compacting with vibratory power roller to achieve the desired density, complete as per clause Table - 400-2 S.N. 4.2 (C) MORT&H specification no- 401 grading size 53.00-26.50 mm @ 35 %, 26.50 - 4.75 mm @ 45 % and 2.36 mm & below @ 20 %.(PSR)

RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone (DSR 2023 5.1.2)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (DSR 2023 5.22.6)

Supply & Laying of I shaped (Zigzag) precast lnterlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50k9) lncluding 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.80 mm (Rubber molded Grey)