REPAIRS TO DRAIN COMPOUND WALL GATE PATH FENCING ETC AT JAK LI RC UNDER GE 970 EWS

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed

Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed

Preparing new surfaces of walls & applying two coats of cement base paint over a coat of primer complete all as specified & directed.

Excavating in Post holes (or for similar work) each n exc 0.50 cum, getting out, returing filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil, watering, and removing surplus soil to a distance n exc 50m and making good surface incl taking out old unserviceable RCC/steel fencing post complete all as specified & directed.

PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundations, filling and mass concrete complete all as specified & directed by Engr-in-Charge.

MS hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel bolts machine made with hexagonal or square head one end and screwed the other or screwed both ends each screw end to be fitted with washer and one hexagonal or square not nexc 5cm long, dia of neck 5 to 10mm complete all as specified & directed

S & F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and strainning and fixing to any type of strandred rails strainning bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins etc, as directed (each line wire to be measured) all as spd and directed

Restrainning resecuring incl making good with staples Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified & directed

Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified & directed

All as per srl item No 02 here-in-before but except stone complete all as specified & directed

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified & directed

All as per srl item No 4 above but except bricks complete all as specified & directed by Engr-in-Charge.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above Ground level) complete all as specified & directed

Cement concrete type B-2 1:2:4 (using 40mm graded aggregate) 100 mm thick as in hardstanding etc including spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green, complete all as specified & directed

Cement concrete type C-2 1:3:6 (using 40mm graded aggregate) 75 mm thick as in sub base etc finished surface even and smooth without using extra cement, complete all as specified & directed

S&F in repair factory made Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, incl sand cushioning 25 mm thick below paver block complete all as specified & directed

S&F in repair factory made Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade with grey cement and pigment, incl sand cushioning 25 mm thick below paver block complete all as specified & directed

S&F in repair factory made machine pressed precast chemical coated skid resistant chequred tiles made with white cement and color pigment, 300x300mm and 20-25 mm thickness M35 grade incl screed bed 20mm in CM (1:4) complete all as specified & directed

M&L johnson endura paving coloured tiles of technocommercial equivalent of size 300mmx300mmx10mm set and jointed in neat cement slurry pointed with white or coloured cement laid over and incl 15mm thick screed bed built in CM (1:4) after demolition old floor hearth or wall tiling complete all as specified & directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings complete all as specified and directed.

S&F 0.63mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed

All as per srl item No 4 above but except sheet complete all as specified & directed

Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed

PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregates) as in coping work complete all as specified & directed

Preparation of old plastered surfaces of wall and applying two coat of cement base paint complete all as specified & directed

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified & directed

Plain Cement Concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains, complete all as specified & directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc,complete all as specified & directed

Supply of Chain link MS galvanisd fencing, any size or type complete all as specified & directed

Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed

S&F in repair concertina coil punch type 450/600/900 mm fixed dia on top of walls/angles/on ground etc or laid and fixed in any position incl necessary acessories & arrangement to fix the coil complete all as specified & directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed

M&L for Providing precast cement concrete 1:2:4, type B1 (20 mm graded aggregate) set in CM 1:6, as in cover slabs (for manholes, drain cover etc) with plain fair facescomplete all as specified & directed

MS TMT Bar 10 mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strands for complete all as specified & directed

M&L Providing precast cement concrete louvers and jallies made out of cement concrete type B-0 1:2:4 (using 12.5mm graded aggregate) set in CM 1:4, 50mm thick (measured solid) Including all mouldings complete all as specified & directed

M & L for taking down rolling shutter gate of any description and size and re fixing in the same after repairing like anchoring rod , gear, hood, strips, springs any nos hinges, pivots, bearing, necessary welding, oiling , greasing, painting,to make the gate smooth and fully functional, incl replacing of unserviceable acessories , like MS handle, complete change of pivots into bearing complete, etc complete all as specified and directed.

M&L for flush pointing, to random rubble masonary uncoarsed or brought upto coarse in CM 1:4 complete all as specified & directed

M/S LATIF AHMAD BABA CONSTRUCTION

M/s Nasir Rasool Dar

M/S NEW JOHAN TRADERS

M/S B S CONSTRUCTIONS

M/S Thakur & Sons

M/S A.R.TANTARY

M/S MIR SAJAD ENTERPRISES

M/S BHAT AND CO

NAJAR ENTERPRISES

M/S maqsood enterprises

M/S ABDUL HAMID RATHER

M/S GHULAM HASSAN KUCHAY

M/S BASHIR AND SONS

M/s Bashir Enterprises

M/S ADIL CONSTRUCTIONS

M/S SUHEEL CONSTRUCTIONS