ZILA PANCHAYAT ME TYPE 4 OFFICERS QURTER ME BRICK KOBA V ANYA KARYA

Providing & laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a)Applying a slurry CoatOfNeat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 & approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 & approved by Engineer -in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming toIS: 2645& approved by Engineer-in-charge to required slope & treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 & approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/ Sqm including grouting the joints with white cement and matching pigments etc., The tile must be cut with zero chipping diamond cutter only, laying of tile will be done with the notch trowel, plier, wedge, clips of required thickness, Levelling system and rubber mallet for placing the tiles gently and easily.

Providing and fixing ISI marked Stainless Steel sliding door bolts with nuts and screws etc. complete.

Providing and fixing ISI marked Stainless Steel sliding tower bolts with nuts and screws etc. complete.

Providing and fixing ISI marked Stainless Steel sliding Handle with nuts and screws etc. complete.

plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

PLUMBING WORK Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.

Providing and fixing 10 litre P.V.C. low level flushing White cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean & Wall moutain type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ( for sink)

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931

Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 100 mm diameter

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

ELECTRICALWORK Supply&wiring of submains with 2 nos.1.5 sq.mm FRLSHPVC insulated1100Vgrademultistrandsinglecorecopperconductor cablein 20mm dia heavy gauge rigid steel conduit partly concealedin walland partly laidin slab along with therein for cement before concreting ,with1no.1.5sqmm .FRLSH PVCinsulatedmultistrandcopper conductor cable as earth continuity wirein cludin gmatching colour wash etc.completeinall respect.

Supply & wiring of submains with 2nos .4sq. mm FRLSH PVC insulated 1100V grade multi strand single core copper conductor cable in 20 mmdia heavy guage rigid steel conduit partly concealedin wall and partly laid in slab along with there in force ment before concreting ,with 1no. 2.5sq mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wirein cluding matching colour wash etc. complete in all respect

Supply & wiring of submains with 4 nos.10 sq.mm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 40 mm dia heavy guage rigidsteel conduit partly conceale din wall and partly laid in slab along with there in for cement before concreting ,with 2no .6sq mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wirein cluding matching colour washetc .complete in all respect

Supply and fixing of water tight oblong 10Watt LED bulk head luminaire having die cast housing with driver set confirming to IP65 and above Protection. Complete in all respect. CAT. - AAA

Round off