Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹28.8 L+₹8.7 L (43.0%)Rejected-Finance NEAR CIVIL HOSPITAL VILLAGE PO CHOWARI DISTT CHAMBA HP | CHOWARI | CHAMBA | HIMACHAL PRADESH | 176302 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹31.1 L+₹10.9 L (54.4%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L3 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
CERTAIN B/R REPAIRS TO MES INSTALLATIONS AND PERIODICAL SERVICES TO VARIOUS BUILDINGS AT MOTITBBA, BAKROTA AND DAINKUND UNDER AIR FORCE STATION DALHOUSIE
2023_MES_597514_1
8422/GE/PAF-12/2023-24
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹70,000
Yes
15 Jul 2023
22 May 2023
21 Jun 2023
22 May 2023
19 Jun 2023
5 Jun 2023
Amount
Dismantling plain corrugated asbestos /translucent sheet in roof covering incl redges complete all as specified and directed by Engr-in-Charge.
Supply and fixing of 0.63mm thick galvanised, corrugated mild steel sheeting with two corrrugations side lap, fixed with coach screws and washers, in roofs, wall etc. with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.
Supply and fixing of 0.63mm thick galvanised, plain mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.
Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in-Charge.
Taking down cement plaster on brick wall upto any height and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engr-in-Charge.
M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engr-in-Charge.
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engr-in-Charge.
Preparation new surface of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces complete all as specified and directed by Engr-in-Charge.
Preparation of old plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as perIS 15489:2004, Alkali and funggal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applieed @0.90litre/10sqm over new surfaces in camouflaged pattern complete all as specified and directed by Engr-in-Charge.
Preparation old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.
Preparation of old surfaces of ceilings and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.
Repair Steel rolling shutters system of any size and any description including reparing top cover, anchoring rod, hasp and staple, including necessary welding, greesing etc and making the shutters complete serviceable all as per existing pattern complete all as specified and directed by Engr-in-Charge.
Preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge
Preparation of new steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over a coat of moderant solution to remove zinc coating complete all as specified and directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.
M&L for Cement concrete M-10 (Nominal mix) using 40 mm graded crushed stone aggregates in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams complete all as specified and directed by Engr-in-Charge.
M&L for Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 design mix as in fdn, including raft, fooling foundation beams plinth beams bases for columns complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc complete all as specified and directed by Engr-in-Charge.
M&L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.
M&L for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed by Engr-in-Charge.
M&L for framed work such as steel doors, gates or other section or angle, Fe-410-W Gde E-250 of quality "A' complete all as specified and directed by Engr-in-Charge.
M&L for Plastering 10mm thick in cm 1:4 on fair face of brick work or concrete surfaces finished fair even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L painting with synthetic enamel paint two coats over a coat of red oxide promer including preparing the new untreated steel surfaces of any description over 10cm in width or girth complete all as specified and directed by Engr-in-Charge.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick screed bed or bedding layer of cement mortar 1:6 to laying floor finish complete all as specified and directed by Engr-in-Charge.
M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and directed by Engr-in-Charge.
M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and directed by Engr-in-Charge.
Supply and fixing ball bearing for rolling shutter including taking out u/s ball bearing all as directed complete all as specified and directed by Engr-in-Charge.
Supply and fix Springs for rolling shutter including taking out u/s springs all as directed complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames including shutter exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed by Engr-in-Charge.
Taking down chowkats or frames including shutter n.exc 1.5 Sqm complete all as specified and directed by Engr-in-Charge.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Doortransmission gear made of mild sleel with multi point locking system with strikes. SS Hinges heavy duty complete all as specified and directed by Engr-in-Charge. Note:- The rate shall also include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing doors,windows and ventelators and , shall deemed to have been included in the quoted rate and no extra shall be admitted at a laterdate in this respect.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. and of approved quality with 6 mm thick figured glass and ss wire mesh of 0.36 mm nominal dia and average width of aperture 1.40 mm, complete all as specified and directed by Engineer-in-Charge. Note:- The rate shall also include making all damages/plastering repair, leveling and making good in plumb all the cills and jambs of opening before fixing windows and , shall deemed to have been included in the quoted rate and no extra shall be admitted at a laterdate in this respect.
M&L screed bed or bedding layer of mortar 15mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
M & L for coloured chequered cement concrete tiles 22 to 25mm thick, set jointed and pointed in neat cement slurry in floors, with grey cement and pigment complete all as specified and as directed by the Engineer-in-Charge
Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer in Charge.
M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate), spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green as in floors complete all as specified by Engr-in-charge.
M & L PCC 1:3:6, type C-2, 50 mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-Charge. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor
Demolition of stone/ boulder masonary complete all as specified and directed by Engr-in-Charge.
M&L PCC Type D-2 (1:4:8) in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:3:6 Type C-1 (using 20 mm graded crushed stone aggregate) as in wall or retaining wall, any thickness, size or shape including pilasters buttresses columns, pillars boundary pillars andposts (including caps and bases) complete all as spefcified and as directed by the Engineer-in-Charge.
M&L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc, verical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engneer-in-Charge
Supply and fixing of PVC (SWR) pipes single socketed, in any length of 110mm bore with rubber ring joints, laid in wall & trenches, complete all as specified and directed by Engr-in-Charge.
M&L for boulder filling dry, hand packed tightly, guage exc 80mm and n exc 150mm as in backfilling of retaining wall complete all as specified and directed by Engr-in-Charge.
M&L for 5.5 mm thick plain glass fixing and glazing with aluminium beading and rubber gasket including haking out old broken glass in aluminium door and window frame complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and directed by Engr-in-Charge.
Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w (Gde-E-250) quality A complete all as specified and directed by Engr-in-Charge.
M&L 5 mm thick cement plaster in cement mortar 1:3 on ceilings, surfaces finished even and smooth without using extra cement complete all as specified and as directed by the Engneer-in-Charge
Preparation new surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engr-in-Charge.
Preparation new surfaces of ceilings and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engr-in-Charge.
Preparation old surfaces of wall and applying two coats of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engr-in-Charge.
Preparation old surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.
Preparation old surfaces of wall and applying one coats of oil emulsion distemper complete all as specified and directed by Engr-in-Charge.
Complete removal of existing treatment and applying two coats of oil emulsion distemper on old decorated wall surfaces complete all as specified and directed by Engr-in-Charge.
Preparation of old painted steel and iron surfaces of any description over 10 Cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge
Complete removal of existing treatment and applying three coats of white wash on old decorated plastered surfaces of ceilings complete all as specified and directed by Engr-in-Charge.
Complete removal of existing treatment and applying three coats of white wash on old decorated surfaces of walls complete all as specified and directed by Engineer-in-Charge
Preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying One coat of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of Synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
m/S Varun Gupta
Vijay Kumar Contractor and Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .