06/SE/2019-20 LOT-01

Amount

Providing laying spreading and compaction stone aggregates of 45-90 mm specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100 KN in stages to proper grade and comber,applying and brooming stone sceeing/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-1 as per technical specification clause 405

Providing laying spreading and compaction stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing,rolling with smooth wheel roller 80-100 KN in stages to proper grade and comber, applying and brooming stone screening/binding materials to fill up the interstices of coarse aggregate, watering interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per technical specification clause 405 (45mm to 63mm)

Providing laying spreading and compaction stone aggregates of specification sizes to water bound macadam specification including spreading in uniform thickness, ,hand packing,rolling with smooth wheel roller 80-100 KN in stages to proper grade and comber, applying and brooming stone Screening/binding materials to fill up the interstices of coarse aggregate, watering interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause 405(22.4 mm to 53 mm)

Providing and applying primer coat with slow setting bitumen emulsion on prepared surface of Granular base including cleaning of road surface and spraying primer@ 0.70 kg. per Sqm. On the prepared bituminous surface as per technicaal specification clause 502

Providing and applying Tack Coat With VG-10 using emulsion distributor @ 0.25 Kg Pre Sqm. On the perepares bituminous surface cleaned with Hydrolic as per technical specification Clause 503

Providing Laying and rolling of open-graded premix surfacing of 20 mm thickness compossed of 13.2 mm to 5.6 mm agregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant laying and rolling with a smooth wheeled roller 80-100 KN static roller capacity, finished to required level and grades to be followed by seal using Type 'C' as per technical specification clause 510

Providing and laying seal coat sealling the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification clauses 510

Providing and fixing brick edging on one side of road with first class brick 8 Cm wide and 12 Cm deep laid with mud mortar including all material labour T&P complete.

E/w in patries one side of road excavatin to be in ordinary black with moorum soil from Borow Area not exccrding 0.5 m. in depth and earth work in embankment cotten soil 0.5 m. in depth and earth work in embankment in 20 Cm layers including ramming and dressing the surface to required lavels and by power transport within 1.00 Km lead including all labour T&P etc complete as per direction on Engineer-in-charge

M/s Maruti Supplyer & Constructions

LALMANI MAURYA

ALGOO SINGH

Maa Vindhyawasini Construction

M/S HAZRAT ALI