PROVN OF DRAINAGE SYSTEM (LENGTH 460 MTRS) IN MISSILE STORAGE FACILITY SITE-II OF 501 AD MSL REGT (MRSAM) AND ADDL ALTN TO BLDG NO P-171 AT AGNIBAZZ OFFR MESS OF 374 COMPOSITE ARTILLERY BRIGADE NASIRABAD

Amount

Surface excavation n.exc 30 CM deep and getting out soft/loose soil complete all as specified and directed.

Excavation over areas not exceeding 1.5m deep and getting out in any type of soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

Returning, filling in , including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete, all as specified and directed.

Removing excavated material exc 50 metre and not exc 250m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) type B-1 using 20mm graded aggregate as in flooring complete all as specified & directed.

M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified & directed.

M&L for formwork to slab and similar work with rough finised surface complete all as specified and as directed.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in roof slab/roof beam complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

M&L for reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete, all as specified & directed.

Mild Steel TMT bar 5mm dia and over upto and including 8mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 300mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished fair and even complete all as specified and directed

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies,ceiling and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

M & L for complete removal of existing treatment and Finishing walls with textured interior paint of required shade : (Two or more coat applied @ 3.28 ltr/10 Sqm) over and including priming coat of interior primer applied @ 2.20kg/10 Sqm over 1 mm thick wall care of putty complete all as specified and directed.

M&L for preparation of new plastered surfaces and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, ofrequired shade and colour complete, as permanufacturer's specification. Two or more coatson new work over 1 mm thick wall care putty complete all as specified and directed.

M&L for Finishing old walls with textured exterior paint of required shade : (Two or more coats applied @ 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 Sqm complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed.

M&L glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over and incl 10 mm thick screed plaster in CM 1:4 complete all as specified and directed

M&L for Non-skid ceramic coloured tiles 7 mm thick (jointless) (square/rectangular) area of Each tile exceeding 0.11 Sqm but n exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified & directed.

M&L for vitrified ceramic tiles light shade8-10mm thick (square / rectangular ) polished, area of Each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of Each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.

M&L Outdoor paving tiles of area of Each tiles exceeding 0.08 Sqm but not exceeding 0.36 Sqm, , scratch resistant, stain resistant, impact resistant & acid/alkali resistant , to withstand heavy loads and neutral to sun up effect, complete all as specified and as directed. Make - Johnson,Somany,kajaria and equivalent

M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length complete all as specified and directed.

Providing and fixing wall paper on wall with approved adhesive,complete all as specified and directed by Architect / Engineer-in- charge.

M & L for 20mm thick black/any colour granite on kitchen platform and similar work(size not less than 900 x 450mm over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

S & F water tubing 15 mm bore, medium grade, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

S & F water tubing 20 mm bore, medium grade, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S&F Soap dish any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

S&F in repairs PVC flexible waste pipe of approved quality 32mm bore, 65cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

S&F in repairs stop cock/angle cock 15 mm dia cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as spd & directed

S&F in repairs 125mm dia PTMT grating doom shape with centre or side hole (Mini Wt 40 grms) complete all as specified and directed.

S&F in repairs CI Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed.

S & F in repairs one piece wall hung extended EWCs with seat cover and twin flush fittings of wall mounded two piece EWC's with seat cover ( snow white or ivory or colour as approved by GE ) with Seat Cover and EWC size of 670 x 390 x 760 mm with all necessary fittings with fixing arrangements and connecting to existing water pipe etc in cluding necessary P or S trap fitting and fixed in repairs complete all as specified and directed by Engineer in charge. Make Cera New Cat Name :CERA -CLAIR ( S 1031102) OR Equallent make and model approved by GE

S & F in repairs Table top wash basin with 32 mm C.P. brass waste coupling (Model No ALD-709 of Jaquar or similar),OR Equallent with 15 mm nominal bore CP Single Lever Basin Mixer with pop up waste & 450 mm long braided Hoses(Model: no LYR-38051B of Jaquar or similar) make and model approved by GE. including cutting and making good the walls wherever require complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n .exc 1.50 Sqm Each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm Each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

S&F in 12 mm thick toughened glass for door of any size and side portions of toughened glass fixed to wall / floor, joints sealed with clear silicon silicate gel to make water tight, incl necessary cleats edges with diamond cut including taper drilling to flush the screws / all fitting as required, floor hinges, patch fitting top,bottom and sides,lock and handles, inluding fixing of floor spring /Floor Machine spider joint etc. all as specified, required at site by manufacturer instructions and as directed.

S&F in repair fancy type 20mm dia stainless steel curtain rods powder coated fixed to bracket completed all as specified & directed.

S&F decorative type knobs with bracket of ss powder coated fixing at end of Curtain rod complete al as specified & directed.

Taking out old un serviceable tubular towel rail & S&F tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as sped & directed.

Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but n. exc 1000 trs capacity Each complete all as specified and directed.

S& F rotational moulded synthetic (HDPE) water storage tank 1000litre capacity hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.

S&F ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed.

M&L 40 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank and M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm stone crushed agg (for providing bottom base of PVC tank) complete all as specified and directed.

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 25 mm dia, ISI marked complete all as specified & directed.

M & L for preparation of old Steel surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side baancing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only.

Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE.

Supply only soft close clip on hinge bright finish complete all as specified & directed.

Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed.

Supply only in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only in repair stainless steel plate basket of approved quality of size 520 X 485 X 150mm complete all as spepcified and directed. Make :- Godrej SS 304

Supply only basket / trolly channel 50cm long extruded MS galvanised over roller complete all as spepcified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with flyash bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: Make of wire: KEI/HPL/Havells, Conduit: Anchor/National/Bajaj Plast

One light point/bell point controlled by one way 5 Amps single pole switch complete all as specified and directed.

One ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch complete all as specified and directed.

One 5 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed.

One 5 Pin 5 Amps socket outlet on independent board with other switch complete all as specified and directed.

Ditto all as per item No 9 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed.

S&F of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. Make: Havells/Finolex/L&T

S&F of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. Make: Havells/Finolex/L&T

S&F of modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed. Make: Havells/Finolex/L&T

S&F of modular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. Make: Havells/Finolex/L&T

Supply and fixing of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed.

Taking down existing ceiling fan, exhaust fan & wall mounted fan and re use at site or carrying to the Each store(To be measured only when found serviceable in all respects complete for re use.) complete all as specified and directed

S&F exhaust fans AC single phase 230V of size 300mm sweep PVC body with louver including connecting with three core flexible copper wire from ceiling rose to connector of fan including opening for exhaust fan and making good complete all as specified and directed. Make Crompton/Havells/Philips

Supply and fixing LED box type tube light fitting 20 watt made up of CRCA sheet with pre wired Each double sided connections including 1x20 watt retrofit LED tube rod with extruded aluminium body PC diffuser and inbuilt driver, double sided connection, complete with all accessories internally prewired complete all as specified and directed. Make Crompton/Havells/Philips

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp in warm white and cold white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make Crompton/Havells/Philips

S&F LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. Make Crompton/Havells/Philips

M& L for TV Socket incl PVC conduit and co axial cable wire complete all as specified and directed.

M& L for Telephone socket incl PVC conduit and telephone wire complete all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP 'C' series for AC complete all as specified and directed

S&F LED 2 way ligh tfitting, 6 watt, in cool day/warm white IP 65 Aluminium Die cast complete with all Each accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. Make:Wipro cat part no. WIPRO GARNET 6W 1X2 WAY WALL LIGHT (DW40627) or equivalent Crompton /Philips

Supply and fixing wall mounted decorative luminarie fitting suitable up to 9/10 Watt LED lamp Each champagne gold finish fixture with plastic/glass body suitable for B22 Base in warm white or cold white complete all as specified and directed. Make: Havells, Model- LHFOECE1TZ1B014, LHFHANDBTN1K007, LHFOAJE2TZ11060 and LHFHANDBTN1M007 or equivalent model of Mepro/Philips

M/S Nexus Projects (BID ID -3164575)

PD GUPTA AND COMPANY (BID ID -3164385)

V K LAKWAL CONSTRUCTION (BID ID -3164392)