Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC CAMP INS CHILKA CHHATRAGARH PO NB CHILKA ODISHA 752037 | CHILKA | KHORDHA | ODISHA | 752037 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹8.4 L+₹88,876.10 (11.8%)Rejected-Finance AT DUNGAMAL NH 5 PO INS CHILKA DISTT KHORDHA ODISHA 752030 | KHORDHA | ODISHA | 752030 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹8.8 L+₹1.2 L (16.1%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹9.1 L+₹1.6 L (20.5%)Rejected-Finance | L4 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹14,000
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Chilka
Garrison Engineer Chilka PO INS Chilka Distt Khordha Odihsa 752037
REPAIRS TO JOINERY, CUPBOARD AND PELMET BOX IN ZONE-II AREA AT INS CHILKA UNDER GE CHILKA
2022_MES_550379_1
GE/CHL/8817 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer Chilka
MES Enlisted Contractor of Class E category a i
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Chilka
₹14,000
Yes
5 Nov 2022
6 Sept 2022
22 Oct 2022
6 Sept 2022
15 Oct 2022
22 Sept 2022
6 Sept 2022 - 15 Sept 2022
Amount
Taking down shutters of any descrption not exceeding 1 sqm each complete all as specified and as directed.
Taking down shutters of any description, exceeding 1.0 sqm but not exceeding 2 sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) not exceeding 1.5 sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and as directed.
Taking down shutters of any descrption not exceeding 1 sqm each and re-fixing in same opening including easing and adjusting complete all as specified and as directed.
Taking down shutters of any descrption exceeding 1 sqm and not exceeding 2 sqm each and re-fixing in same opening including easing and adjusting complete all as specified and as directed.
Resecuring,easing and adjusting without taking down shutters of any description not exceeding 1.00 sqm each, complete all as specified and as directed.
Resecuring,easing and adjusting without taking down shutters of any description t exceeding 1.00 sqm but not exceeding 2 Sqm each, complete all as specified and as directed.
S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.
S&F 2nd class hard wood, 35 mm thick, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowklats complete all as specified and as directed.
S&F 40mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.
S&F 2nd class hard wood, 35 mm thick Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I , 2009, section 8, clause 8.24 (a) complete all as specified and as directed.
All as per item No 13 above but 30 mm thick window or ventilator shutters (with sash bar) size of members of shutters as specifed in SSR Part-I, 2009 , section 8 clause 8.24 (b) complete all as specified and as directed.
S&F 300 mm long , mild steel , ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed.
S&F in repair 300 mm long , mild steel , ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed.
S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.
S&F in repair 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.
S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.
S&F in repair 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.
S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F in repair 100 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
S&F in repair aluminium plate type II, gate and shutter, hooks and eyes 150 mm size complete all as specified and as directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 2nd class hard wood, 25 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.
S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F in repair 75 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F aluminium anodised 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F in repair aluminium anodised 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed
S&F in repair stainless steel (SS-304 grade) type A, 200x 19x 1.9 mm friction hinges to the side/top hung windows, of approved quality with necessary stainless steel screws etc complete all as specified and as directed.
S&F in repair stainless steel (SS-304 grade) type B, 250x 19x 1.9 mm friction hinges to the side/top hung ventilator of approved quality, with necessary stainless steel screws etc complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
S&F in repair 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
S&F 5.5 mm thick, sheet glass, ordinary quality and glazing with oil putty or with beads in squares not exceeding 0.5 sqm each pane complete all as specified and as directed. Make:- Hindustan Pilkigton glass Works Ltd/ Modiguard/ Saint Gobain.
S&F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty or with beads in squares not exceeding 0.5 sqm each pane complete all as specified and as directed. Make:- Hindustan Pilkigton glass Works Ltd/ Modiguard/ Saint Gobain.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including second class hard wood beads straight of sectional area not exceding 3 sqcm for glazed or gauged joinery including mitred etc complete all as specified and as directed.
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including second class hard wood beads straight of sectional area not exceding 3 sqcm for glazed or gauged joinery including mitred etc complete all as specified and as directed.
S&Fmild steel work as in holdfast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
M&L applying two coats of synthetic enamel paint over a coat of pink primer including preperation of new surface of wood and wood based material of any description, not otherwise described over 10cm width or girth complete all as specified and as directed.
M&L applying one coats of synthetic enamel paint including preperation of old painted surface of wood and wood based material of any description , not otherwise described over 10cm width or girth complete all as specified and as directed.
S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F in repair floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished all as specified and directed.
M&L french polishing on wooden surfaces of any description , width or girth including cleaning and preparing the surface including applying with one or more coats on old work complete all as specified and as directed.
Cutting holes in brick walls, exceeding half but not exceeding one brick wall built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3, or in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.
S&F Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening as per specification and drawing given in SSR part-II complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and as directed.
Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key,scrubbing down with water etc complete all as specified and as directed.
M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6 , surface finished even and fair complete all as specified and as directed.
M&L applying two coat of oil bound distemper over a coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete complete all as specified and as directed.
M&L applying three coats of white on wall including preparation of newly plastered surface of walls complete all as specified and as directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
S&F in repair 25mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.
S&F in repair 0.56 mm thick ,Plain aluminium sheeting, Alloy 31000 H4 in door shutter and straight flashing (length and girth as fixed) , fixed with screw complete all as specified and as directed.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws in aluminium door complete all as specified and directed .
S&F 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. Make:-Jindal/Hindalco/Ajit India Ltd
S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type with aluminium sections minimum weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminium fittings such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed. Note :- Glass and paticle board shall be measured and paid seperately under respective item as considered therein
S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window or ventilator shutters of sliding type without sash bar, aluminium sections minimum weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, screws, rollers, holding and with locking arrangements complete all as specified and as directed. Make of Aluminimum section:-Jindal/Hindalco/Ajit India Ltd Note :- Glass or stainless steel wire cloth shall be measured and paid seperately under respective item as considered therein.
S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window or ventilator shutters side hung type without sash bars, aluminium section minimum weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stay 150 mm long -01 No, 100 mm long aluminium hinge type B-21 -02 No,aluminium handle of suitable size -02 No and other accessories complete all as specified and as directed. Make of Aluminimum section:-Jindal/Hindalco/Ajit India Ltd Note :- Glass or stainless steel wire cloth shall be measured and paid seperately under respective item as considered therein
S&F 18 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws in timber frame work in cup board shelves complete all as specified and as directed.
S&F 3 mm thick sheet glass,ordinary quality, ground or obstructed or frosted, one side and glazing with oil putty or with beads in squares exceeding 0.5 sqm each pane complete all as specified and as directed. Make:- Hindustan Pilkigton glass Works Ltd/ Modiguard/Saint Gobain.
S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of Make "Deco grill" and DG-202 model with aperature size 60 mmx45mm fixed with suitable channel complete all as specified and as directed
S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed
S&F in repair continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed
S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.
UDAYA BHANU NAYAK
D RAVICHANDRAN
M/S JAGANNATH SASMAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .