PROVN OF ADDN AND ALTN TO T-1, T-2 AND T-6 BLDGS AT INS KARDIP, KAMORTA UNDER GE(I) CAMPBELL BAY

Amount

B/R PORTION Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.

S & F pre-painted corrugated galvalume (55% aluminium + 43.5% Zinc+ 1.5% Silicon) steel sheets as in roofing /wall cladding, 0.50mm thick (total coated thickness), conforming to AS-1397/ASTM A-792 and having yield strength minimum 550 MPa fixed with self drilling metal coated screw of appropriate size, self taping bolts and fixed as per manufacturers instructions complete all as specified and directed. (Note: The sheet shall be laid with one corrugation side lap and one end lap minimum 150mm all as per manufacturers instructions alongwith wind ties).

S & F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F Rolled steel sections Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S & F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S & F wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessay drilling bolting or riveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and as directed.

M & L for preparation of new surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of precast cement concrete block waling as in manhole, septic tank and drains etc built in cement mortor all quoins, arches pillars etc but excluding ashlar facings dressed stone etc all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:4) complete all as specified and directed.

Taking down of cement plaster of any description or thickness/ chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to receive new plaster complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in CM (1:4) complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar(1:6) on fair faces of solid block or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparing new plastered surfaces of wall and applying two coats of OBD over primer over a thin layer of wall care putty on decorated wall surfaces of any description, complete all as specified and as directed.

M & L for preparing old plastered surfaces of wall and applying two coat of OBD over a thin layer of wall care putty, complete all as specified and as directed.

M & L for preparing new plastered surfaces of wall and applying two coats of anti fungal exterior acrylic emulsion on wall surfaces of any description complete all as specified and as directed.

M & L for two coats of antifungal exterior acrylic emulsion on old plastered wall surfaces of any description complete all as specified and as directed.

M & L for applying wall care putty, in two coats over wall surfaces & smoothening the surfaces with sand papers etc (preparatory to OBD/ plastic emulsion /interior /exterior emulsion paints) complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame), n.exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame), exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1 Sqm each all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2.0 Sqm each all as specified and as directed.

S & F for second class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

S & F 30mm thick, second class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers ; supplied and fitted to chowkat all as specified and as directed.

S & F 35mm thick second class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M & L for preparation of new or previously untreated wood surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over one coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed.

S & F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed.

S & F Stainless Steel butt hinges 100mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and as directed.

S & F Stainless Steel butt hinges 75mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and as directed.

S & F extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and directed.

S & F extruded aluminium alloy handles 100mm, fabricated type, anodized complete all as specified and directed.

S & F aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and directed.

S & F aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and directed.

S & F for aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed all as specified and as directed.

S & F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed with aluminium wire staples all as specified and directed.

Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or errecting stand complete all as specified and directed.

S & F in repairs, vitreous china squatting pan, Orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush type) with and including connection to trap, set in and including concrete but connection to flushing pipe, anti syphonage pipe etc., complete inlcuding making good to floor, connection to drain (or out going pipe) etc., complete all as specified and as directed by Engineer-in-Charge Make : Cera/Johnson/Parry Ware or equivalent as approved by GE.

S & F in repairs European type WC (Pedestal Pattern) complete inlcuding pedestal pan and trap inlcuding connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and as directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern, 10 litres, low level, white with inlet ball valve, float and handle inlcuding brackets complete all as specified and as directed.

Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed.

S & F steel tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down steel water tubing and connection 20mm dia complete all as specified and as directed.

S & F steel tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 32mm bore low density polythylene pipes (LDPE) of pressure rating 6 Kgf/cm2 laid in trenches complete all as specified and as directed.

S & F in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

S & F in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and directed.

S & F in repairs pillar taps fancy type, cast copper alloy, with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and ply nuts screwed for iron pipes and fixed complete all as specified and directed.

S & F in repairs 32mm size waste couplings of PTMT (half or full threaded) (minimum weight 32mm- 45gms) complete all as specified and directed.

S & F in repairs towel rail 450mm long of Stainless Steel fixed with and inlcuding chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed.

S & F in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and as directed.

S & F in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

S & F in repairs PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed.

M & L for cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using splited bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings exc 15 cm thickness above ground floors complete all as specified and as directed.

M & L for providing 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set in floors etc., laid over and including 20mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and as directed.

M & L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in flooring and rounded or chamfered on edges complete all as specified and as directed.

M & L for providing cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

M & L for providing cement concrete (1:3:6) type C-1, 1:3:6 (20mm graded stone aggregate) as in coping benching, bed plate, including necessary form work complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not hacking), removing serviceable tiles away from site and rubbish off the premises complete all as specified and as directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer of mortar 15mm thick in cement plaster 1:4 for laying floor finishes complete all as specified and as directed.

S & F glazed ceramic tiles 300mm x 200mm x 6 to 7mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat of 10mm thick cement plastered as bedding layer / screed bed on fair surfaces of brick in cement mortar (1:3) to receive wall tiles complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M & L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Dismantling of wall panelling/ceilling (fibre, pulp, insulation etc) of any description of any thickness including cover fillets complete all as specified and as directed.

S & F aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 x 600 mm consisting of Tee/ Angle section, size 40 x 40 x2 mm thick as approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass /stainless shunk screws., aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6 mm dia GI wire hook in Tee members at 1.5 m Centre to Centre fixed to steel truss or roof complete all as specified and as directed.

M & L for fixing in position 4 mm thick Non Asbestos designer ceiling board of size 595 x 595 mm as per manufacturer's specification complete all as specified and directed.

E/M PORTION Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/ white wash complete all as specified and as directed.

M & L for point wiring concealed with 1.5 Sq mm single core copper conductor FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through PVC rigid conduit and its accessories of suitable size, heavy grade ISI marked concealed on walls /roof and MS pressed steel terminal boxes modular type of 1.0 mm thick of suitable size duly painted with red oxide metal primer including fixing/ grouting sunken and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular cover plates for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm multistranded copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light point controlled by one, one way switch 5 Amps complete all as specified and as directed. Make of Wires : Polycab / Havells / Finolex

Description all as per Item No 76.00 but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

Description all as per Item No 76.00 but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

Description all as per Item No 76.00 but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

Description all as per item No 76.00 but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point incl running of 2.5 sq mm multistranded copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed. Make of Wires : Polycab / Havells / Finolex or equivalent

S & F Modular switch 1 way 6 A, 1 module complete all as specified and as directed.

S & F Modular Socket 6A-2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular switch 1 way 16 A, 1 module complete all as specified and as directed.

S & F Modular Socket 6/16 Amps, 2/3 pin combined 2 module complete all as specified and as directed.

S & F Modular Fan step regulator, 80W-2 Module complete all as specified and as directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.

S & F ceiling fan complete with blades, down rod, and all accessories, 230 V, 1200mm sweep Min Air Delivery 210 CFM with Five star rated with Brushless direct current motor (BLDC) complete all as specified and as directed.

S & F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed.

M & L for submain wiring with single core PVC insulated FRLSH multistranded copper conductor cable of size 2 x 4.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking out old wire complete all as specified and as directed. Make of Wires : Polycab / Havells / Finolex Make of Conduit & its accessories : Modi / Prince / Sudhakar / Prestoplast

M & L for submain wiring with single core PVC insulated FRLSH multistranded copper conductor cable of size 4 x 6.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire including taking out old wire complete all as specified and as directed. Make of Wires : Polycab / Havells / Finolex Make of Conduit & its accessories : Modi / Prince / Sudhakar / Prestoplast

S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified and as directed. Make : L&T / Legrand / Havells

S & F in replacement sheet metal enclosure verticle MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified and as directed. Make : L&T / Legrand / Havells

Supply & Fixing MCBs of following rating Make : L&T / Legrand / Havells (a) MCB SP 6 to 32 Amps 240V 10 KA. "C" Series

(b) MCB SPN 32 Amps 240V 10 KA. "C" Series

(c) MCB TP 32 Amps 415V 10 KA. "C" Series

(d) MCB TPN 63 Amps 415V 16 KA. "C" Series

S & F wall mounted LED 18/20 watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts including removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaquar

S & F LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F light emitting diode 20 W builing security light luminaire compressing pressure, die cast housing for better aesthetics and thermal management comprises of extruded aluminium housing with pre-wired gear tray with LED’s & drive, heat resistant flat glass suitable gasketed for IP 66 protection, high grade power coating and fitted with toughened glass with high power LED’s of 25 watt and pipe mounting arrangement for end mounting on bracket made out of 25mm dia GI pipe light grade, 1.0m long bent to shape with two sets of clamps made out of flat iron 40 x 5mm, bolts, nuts and washers and applying two coats of aluminium paint over one coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size including taking down existing fittings complete all as specified and directed Make: Bajaj, Philips, Wipro, Havells, Syska, Jaquar, CG

Dismantling and taking out old unserviceable earthing and M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried earth pit not less than 2.25m depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth wire 4 Sqmm by mean of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR-2020 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc. complete all as specified and directed. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI wire 4.0mm dia & GI protection pipe upto 7.5 m length will be measured under this item.

Govinda Swamy Construction (BID ID -3294350)

M/s Gurunath Construction (BID ID -3294386)