SPECIAL REPAIR TO BLDG NO T-13 AND S-1 AT INS KARDIP, KAMORTA UNDER GE (I) CAMPBELL BAY

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings of any type complete all as specified and as directed

S&F pre-painted aluminium zinc corrugated steel sheet (galvalume base) of thickness 0.5mm, in colour and profile having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as approved by GE and to be factory moulded and fixed with hot dipped galvanised with high durable protective triple coated self tapping screws/self drilling screws, to suit the roofing in customized colour matching with the colour of roof covering / cladding to wall and screws are to be fixed using Torque adjustable electronic gun screws driller of suitable capacity complete all as specified (Make - JSW STEEL / BHUSHAN STEEL/COLOUR ROOF INDIA LTD/TATA BLUESCOPE).

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

S & F 16 to 20mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and secured the other or screwed the both ends each screwed ends to be fitted with washer and one hexagonal or square nuts exc 22.5 cm and n.exc 30cm long complete all as directed

Taking down roof trusses,coupled rafters etc.for renewal of any defective members all as specified and as directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410 W (Gde-E-250) quality A complete all as specified and as directed.

Taking down cement or cement lime plaster on brick walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finishing fair and even without using extra cement complete all as specified and as directed.

M & L applying two coats of cement based paint on newly plastered wall surface including preparation of surfaces, complete all as specified and as directed.

Material and Labour for two coats of dry distemper on newly decorated plastered surfaces of walls of any description complete all as specified and as directed.

M&L preparation of new plastered surfaces of wall and applying two coats of antifungal interior acrylic emulsion paint of any description complete all as specified and as directed.

M&L preparation of new plastered surfaces of wall and applying two coats of antifungal exterior acrylic emulsion paint of any description complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified.

M&L applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer including preparation of new steel surface n.exc, 10cm width or girth complete all as specified.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) and removal to store complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 Sqm each with shutters (without taking off shutters from the frames) and removal to store complete all as specified and directed.

Taking down shutters of any description n. exc. 1.00 Sqm each and removing from the site, complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sqm but n. exc. 2.00 Sqm each and removing from the site, complete all as specified and as directed.

S & F 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density ,wood particle board with commercial face venerrs supplied and fixed to chowkats complete all as specified and directed.

Supply and fixing of Anodised aluminium frame for Partitions, doors, windows ventilators and grill with one or more rebates including joining cleat for fixing etc. Complete all as specified complete all as specified and directed.

Supply and Fixing of Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, mortice lock ,hinges, anodized aluminium snap beading, screws etc .complete all as specified and directed.

Supply and Fixing of Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and Fixing of Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed.

Supply and Fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and directed.

S&F 100mm long stainless steel butt hinges with mild steel hinge pin ,fixed to timber frame work. complete all as specified.

S&F 75mm long stainless steel butt hinges with mild steel hinge pin ,fixed to timber frame work. complete all as specified.

Supply and Fixing of aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and Fixing of 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and Fixing of 150 mm long Aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and Fixing of 100 mm long Aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Hacking out old broken glass any thickness size quality or description from metal/wooden frame including punching or drilling out old glazing pins complete all as directed.

Supply and fix 3mm thick figured glass pin headed type and glazing with oil putty in square not exceeding 0.5sqm each fixed to steel frame complete all as specified.

Taking up or down steel water tubings of 15mm bore and fittings etc complete and making good distrubed surfaces of walls/ceillings etc complete all as specified and as directed of following bore

Supply and Fixing of GI water tubing of 15 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

Refixing old steel tubing and connecting in new or old position (walls, ceiling, floor etc) of pipe 15mm bore complete all as specified and as directed

Taking up or down steel water tubings of 20mm bore and fittings etc complete and making good distrubed surfaces of walls/ceillings etc complete all as specified and as directed of following bore

Supply and Fixing of GI water tubing of 20 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

Refixing old steel tubing and connecting in new or old position (walls, ceiling, floor etc) of pipe 20mm bore complete all as specified and as directed

S & F 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 laid in trenches complete etc complete all as specified and as directed.

S&F in repair 15 mm bore angle stop cocks, cast copper alloy (fancy type) chromium plated screwed down high pressure screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and Fix in repairs of 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and Fixing of 15 mm bore pillar taps fancy type, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs 32mm dia waste couplings of half or full treaded PTMT,minimum weight 32mm ,45gms complete all as specified and directed.

S&F in repairs towel rail 450mm long of Stainless steel fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170gms complete all as specified and as directed

S&F in repair 15 mm bore swivel shower of PTMT any colour with shower arm of size 195 mm long with bend of 45 degree and flange complete all as specified and as directed.

Supply and Fixing of PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Demolition of precast concrete block walling as in manhole,septic tank and drains etc built in cement mortor and removing materials from site of work complete all as directed.

M&L precast cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm in width and set in cement mortar 1:4 complete all as specified.

M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, etc. including necessary formwork (as/if required), complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises complete all as directed.

M & L 15mm thick screed bed or bedding layer of cement mortar (1:4 for laying floor finishes complete all as specified and as directed.

M & L for Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 (Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and as directed.

M & L rendering 10mm thick cement plaster as bedding layer / screed bed on fair faces of brick in cement mortar 1:3 to receive wall tiles complete all as specified

S&F glazed ceramic coloured tiles of size 300x200x7mm thick in vertical surfaces of wall conforming to IS-13712 grade B-III set and jointed in neat cement slurry and pointed in white or coloured cement to match over and receiving tiles on vertical surface complete all as specified.

M&L for 75 mm thick PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in plinth protection & finishing the surface even & smooth, without using extra cement complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water and remove dust and brushing with neat cement slurry @ 3 Kg of cement per sqm complete all as specified and as directed.

Material and Labour for 100 mm thick PCC, 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base of floorings complete all as specified and as directed.

M&L plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in flooring and rounded or chamfered on edgescoping including weathering slightly rounded or chamfered angle and throating including necessary form work complete all as specified.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing materials from site of work complete all as directed.

S&F aluminium anodised snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 X Sam 600 mm consisting of Tee/Angle section, size 40X40X2 mm thick as approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass/stainless shunk screws. aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6 mm dia Gl wire hook in Tee members at 1.5 m Centre to Centre fixed to steel truss or roof complete all as specified and directed

M&L for fixing in position 4 mm thick Non Asbestos designer ceiling board of size 595X595 mm as per manufacturer's specification complete all as specified and directed. Make: Everest/Ramco/Charminar; texture, oceanic, lake and hill, electra

M & L For cleaning of blocked CI pipe line 100mm bore,carefully in between manholes using splited bamboo, cleaning rod,binding wire etc and flush with fresh water and disposed off the sludge .complete all as specified

Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and directed by Engineer- in-charge.

Material and Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch.

(b) One fan/exhaust point controlled by one switch.

One 3 pin socket outlet point, 5/6 Amps on the same board complete all as specified.

One 3 pin socket outlet point, 5/6 Amps on the independent board complete all as specified.

Supply and Fixing of Switch piano, flush type single pole, one way 6 Amp

One bell point controlled by one, one way bell switch 5 Amps

S&F Switch socket combination, 3 and 5 Pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type white/ ivory finish complete all as specified.

S&F in repairs Bell, Ding Dong AC 230 volts, single pole all as specified and directed .

M&L electronic fan regulator step type with five steps complete all as specified and as directed.

Supply and Fixing of Ceiling rose PVC/ Polycarbonate insulated body with three terminals all as specified and as directed.

S & F Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting including taking down old unserviceable fittings any type complete all as specified and as directed .

Supply and fix surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed.

Taking down the ceiling / Exhaust fans of any model, size & sweep carefully from its original position and dismantling motor and over hauling complete by cleaning all dust / grease with kerosene or petrol, & replacement of unserviceable bearings, bushes, split pins and nut and bolts and applying new grease for bearings, reassembling the motor and fixing the blades, preparation old surfaces of fan of any sweep & model and painting the with synthetic enamelled paint by spraying including filling cavities and testing and refixing the same complete as directed by Engr in Charge, Note for Item (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoted against this Item. (ii). Any unforeseen minor repair and minor parts like Rubber bush, MS Clamps, split pins, base frames, nuts, bolts etc that are covered under this and required to complete the repair work / smooth functioning of Fan Motor shall be deemed to be included with the unit rate .Transportation of Stator / Rotor parts for machining & rewinding, shaft / bushing for machining , welding , turning at lathe shop at Port Blair are also deemed to be included with unit rate. iii). Rewinding of stator / rotor of motor, any machine work where involved shall be measured and paid separetely against relevant item of this schedule.

Supply only following spares of ceiling / exhaust fan of any model, size & sweep to incorporate against each Item of Schedule 'A' here-in-above complete all as specifed & directed (a) Supply only ball bearing suitable for ceiling fan upto 1400 mm sweep

(b) Supply only ball bearing suitable for Exhuast fan upto 450 mm sweep

(d) M&L for rewinding the motor of ceiling Fan 1200mm/1400mm Sweep by unscrewing without damaging any parts, rewinding the same with fine quality of super enamelled copper winding wire of suitable size & Capacity including,varnishing,drying etc,and refixing the stator and rotor perfectly to rotate smoothly and connection alongwith fixing of 2.5 MFD fan capacitor complete including taking out burned unserviceable copper winding wire all as directed.

(e) M&L for rewinding the motor of Exhaust Fan 300 / 450 mm Sweep by unscrewing without damaging any parts, rewinding the same with fine quality of super enamelled copper winding wire of suitable size & Capacity including,varnishing,drying etc,and refixing the stator and rotor perfectly to rotate smoothly and connection alongwith fixing of suitable fan capacitor complete including taking out burned unserviceable copper winding wire all as directed. Note for item (d) & (e):- Rates for incorporation of new fan capacitor of suitable capacities for smooth runinng of fans are deemed to be inclusive in the quoted rates

Supply&Fixing LED Bldg Security light Luminaries compressing pressure, die cast housing for better aesthetics and thermal management. with LED’s & drive, heat resistant flat glass suitable gasketed for IP65 protection, high grade power coating and fitted with toughened glass with high power LED’s of 45 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete fittings all as specified and directed Make: Bajaj, Havells, Phillps, Wipro,Crompton

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaguar

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire completeas directed by Engr in Charge .

Material & Labour for cutting chases for concealed conduit point wiring,sub main wiring and sinkings for boxes but not exeeding 10 cm girth and making good to walls,floors with 1:3 cement mortar and apply white wash or distemper matching with existing colour as directed by Engr in Charge

S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including refixing / fixing of incomming & outgoing MCBs and making smooth the wall surfaces complete all as specified.

Supply only MCBs of following rating (a) MCB SP 6 to 32 Amps 240V 10 KA. "C" Series

(b) MCB DP 32 Amps 240V 10 KA. "C" Series

All as per item No. 2 on but with 4 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Switch piano, flush type single pole, one way 5 Amp

Supply & Fix Switch Bell push, flush type, 5 amp

Supply & Fix switch socket combination outlet 2 in 1,3 pin 5 Amps flush type

Supply & Fix Switch Socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Dismantling and taking out old unserviceable Earthing and M&L for earthing with galvanised steel earth plate electrode 60cmX60cmX6mm burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth wire 4 sqmm by mean of GI bolts & nuts etc with provision of char-coal and salt etc all as per electrical plate No-3 of SSR-2010 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc. complete all as specified and directed by Engineer-in-charge. Note : 1. Refilling of the earth pit shall be carried out with black cotton soil. 2. GI wire 4.0mm dia & GI protection pipe upto 7.5 m length will be measured under this item.

Note : An amount of Rs 6,938/- towards Schedule of Credit shall be deducted to arrive the Contract sum.

A.G.Construction

M/s Karbhagam Sales Agency

Govinda Swamy Construction

USR Transport

M/s Ramesh Lal

M/s Bismi Builders & Enterprises

A N KUMAR