Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC M/s VK Contractor is L1 | |
| 2 | L2₹24.6 L+₹633 (0.03%)Rejected-Finance 01 ENTERPRISES | L2 | Rejected-Finance Quoted other than lowest rate | |
| 3 | L3₹25.5 L+₹91,765 (3.74%)Rejected-Finance | L3 | Rejected-Finance Quoted other than lowest rate | |
| 4 | L4₹25.7 L+₹1.2 L (4.81%)Rejected-Finance | L4 | Rejected-Finance Quoted other than lowest rate | |
| 5 | L5₹26.0 L+₹1.5 L (6.10%)Rejected-Finance | L5 | Rejected-Finance Quoted other than lowest rate |
| Sl No | Description | Qty | Unit | V K CONTRACTOR L1 | M/s VISHAL ELECTRIC STORE L3 | Singla Enterprises L2 | BABA FARID CONSTRUCTION CO L7 | Batra Builders L6 | K L JINDAL AND CO. L4 | M/S NM Enterprises L5 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed | 500 | Square Metre | 10 ₹5,000 Lowest | 30 ₹15,000 | 30 ₹15,000 | 11 ₹5,500 | 15 ₹7,500 | 30 ₹15,000 | 15 ₹7,500 |
| 2.00 | Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces complete all as specified and as directed. | 20 | Each | 30 ₹600 Lowest | 100 ₹2,000 | 200 ₹4,000 | 300 ₹6,000 | 50 ₹1,000 | 70 ₹1,400 | 120 ₹2,400 |
| 3.00 | Material and labour for hard core of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. | 100 | Cubic Metre | 786 ₹78,600 Lowest | 800 ₹80,000 | 1,800 ₹1,80,000 | 1,700 ₹1,70,000 | 2,250 ₹2,25,000 | 1,800 ₹1,80,000 | 1,700 ₹1,70,000 |
| 4.00 | Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block & similar work etc including form work complete all as specified and as directed. | 8.44 | Cubic Metre | 2,500 ₹21,100 | 1,600 ₹13,504 Lowest | 4,000 ₹33,760 | 5,500 ₹46,420 | 5,800 ₹48,952 | 3,000 ₹25,320 | 4,000 ₹33,760 |
| 5.00 | Material and labour for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E250 Quality B complete all as specified and directed. | 360 | Kilogram | 100 ₹36,000 Lowest | 120 ₹43,200 | 100 ₹36,000 Lowest | 110 ₹39,600 | 130 ₹46,800 | 150 ₹54,000 | 100 ₹36,000 Lowest |
| 6.00 | Material and labour for mild steel tubular poles/post, framed work, framed/truss, purlins, rafter work etc made by using hollow square/rectangular/round pipe, Grade St-240, ERW or induction butt welded tubes conforming to conforming to the latest relevant Indian Standards (IS), such as IS 1239 (Part 1) or IS 4923 for structural use, including post special shaped washers etc, including fabrication, assembly, installation, and finishing, including special shaped washers, bending and welding etc, complete all as specified and as directed. | 8,000 | Kilogram | 100 ₹8,00,000 | 99 ₹7,92,000 | 91 ₹7,28,000 | 100 ₹8,00,000 | 110 ₹8,80,000 | 90 ₹7,20,000 Lowest | 100 ₹8,00,000 |
| 7.00 | Material and labour for mild steel Framed work such as grills, guard bars, ladder, cooler stand, as door frame, railing, cloth drying provision, gratings, framed work for roof sheeting, structural steel work, frame work of water tanks and similar work etc. with ends of bars shouldered and/or riveted, or forged into spikes, made by using rolled mild steel Joist, channel, angle, or tee sections, fixed independently distance pieces, cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, and cut to shape, drilled and counter sunk for screw, conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. | 1,065 | Kilogram | 100 ₹1,06,500 Lowest | 100 ₹1,06,500 Lowest | 100 ₹1,06,500 Lowest | 100 ₹1,06,500 Lowest | 110 ₹1,17,150 | 110 ₹1,17,150 | 100 ₹1,06,500 Lowest |
| 8.00 | Supply and fixing mild steel bolts exc 12mm n. exc 20mm dia, purpose made with hexagonal or square head one end and screwed the other, or screw both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long complete all as specified and directed. | 200 | Kilogram | 100 ₹20,000 Lowest | 120 ₹24,000 | 100 ₹20,000 Lowest | 120 ₹24,000 | 130 ₹26,000 | 150 ₹30,000 | 170 ₹34,000 |
| 9.00 | Material and labour for mild steel work using FI as wind ties for roof including securing bolts conforming to Fe-290 Gde-E-165 complete all as specified and as directed. | 250 | Kilogram | 100 ₹25,000 Lowest | 120 ₹30,000 | 100 ₹25,000 Lowest | 100 ₹25,000 Lowest | 110 ₹27,500 | 120 ₹30,000 | 100 ₹25,000 Lowest |
| 10.00 | Supply and fixing Pre-painted galvalume aluminum zinc coating mass 150AZ corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa coating mass in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Note :- Material test certificate and authentication should be provided by the manufacturing company. | 520 | Square Metre | 800 ₹4,16,000 | 800 ₹4,16,000 | 750 ₹3,90,000 | 648 ₹3,36,960 Lowest | 730 ₹3,79,600 | 775 ₹4,03,000 | 750 ₹3,90,000 |
Tender Value
₹30.7 L
EMD Value
₹61,340
Closing Date
17 Jun 2026, 6:00 pmClosed
Jitender Singh, IDSE
GE (N) Bathinda
PROVN OF PARKING SHED NEAR GROUP SIX STORE BLDG AND ADDITION ALTERATION TO UG SUMP OF CSD DEPOT AT BATHINDA MIL STN
2026_MES_767660_1
8941/NIT-02/26-27/E8
Open Tender
Civil Works
Item Rate
120 days
Bathinda
Class D category a(i)
8 documents required · 8 mandatory
₹500
GE (North) Bathinda
₹61,340
Yes
31 Jul 2026
26 May 2026
19 Jun 2026
26 May 2026
17 Jun 2026
10 Jun 2026
28 May 2026 - 29 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed | 500 | Square Metre | - | - |
| 2 | Excavation in post holes in soft/loose soil n. exc 0.50 cum each, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25 cm including removing of surplus spoil to a distance n exc 50 mtr and making good the disturbed surfaces complete all as specified and as directed. | 20 | Each | - | - |
| 3 | Material and labour for hard core of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed. | 100 | Cubic Metre | - | - |
| 4 | Material and labour for PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, in post hole, bed block & similar work etc including form work complete all as specified and as directed. | 8.44 | Cubic Metre | - | - |
| 5 | Material and labour for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E250 Quality B complete all as specified and directed. | 360 | Kilogram | - | - |
| 6 | Material and labour for mild steel tubular poles/post, framed work, framed/truss, purlins, rafter work etc made by using hollow square/rectangular/round pipe, Grade St-240, ERW or induction butt welded tubes conforming to conforming to the latest relevant Indian Standards (IS), such as IS 1239 (Part 1) or IS 4923 for structural use, including post special shaped washers etc, including fabrication, assembly, installation, and finishing, including special shaped washers, bending and welding etc, complete all as specified and as directed. | 8,000 | Kilogram | - | - |
| 7 | Material and labour for mild steel Framed work such as grills, guard bars, ladder, cooler stand, as door frame, railing, cloth drying provision, gratings, framed work for roof sheeting, structural steel work, frame work of water tanks and similar work etc. with ends of bars shouldered and/or riveted, or forged into spikes, made by using rolled mild steel Joist, channel, angle, or tee sections, fixed independently distance pieces, cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, and cut to shape, drilled and counter sunk for screw, conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. | 1,065 | Kilogram | - | - |
| 8 | Supply and fixing mild steel bolts exc 12mm n. exc 20mm dia, purpose made with hexagonal or square head one end and screwed the other, or screw both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long complete all as specified and directed. | 200 | Kilogram | - | - |
| 9 | Material and labour for mild steel work using FI as wind ties for roof including securing bolts conforming to Fe-290 Gde-E-165 complete all as specified and as directed. | 250 | Kilogram | - | - |
| 10 | Supply and fixing Pre-painted galvalume aluminum zinc coating mass 150AZ corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa coating mass in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.
Note :- Material test certificate and authentication should be provided by the manufacturing company. | 520 | Square Metre | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.95 MB
BOQ_859708.xls
BOQ • 0.33 MB
tenderdocuments02.pdf
Tender Documents • 1.30 MB
NIT02dt.pdf
PDF • 0.42 MB
NIT02amend.pdf
PDF • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .