PROVISION OF CENTRAL MEDICAL GAS, OXYGEN, AIR VACUUM PIPE LINE SYSTEM FOR SURGICAL ICU AND WARD, OT COMPLEX AND OTHER CONNECTED WORKS AT MH BELGAUM UNDER GE BELGAUM

Amount

Supplying, installing, testing and commissioning of 12mm outer dia medical grade copper pipes and fittings manufactured from phosphorous de-oxidized, non-arsenical copper of grade CW024A (Cu-DHP), 0.9mm wall thickness and having mechanical properties in accordance with HTM 2022/HTM 02-01 and conforming to BS EN 13348:2008, fixed to wall/ ceilings with necessary saddles including painting asper statndard colour code all as specified and as directed. Note: The copper pipes shall be supplied with caps and shall be de-greased as per international Standards before installation.

All as described in item No. 01 but 15mm outer dia

All as described in item No. 01 but 22mm outer dia

All as described in item No. 01 but 28mm outer dia

Supplying, installing, testing and commissioning of CE certified British Standard gas outlet Point ( front loaing Oxygen/Vaccum DIN type) wall mounted, with matching probe conforming to NFPA 99: 2005 HTM 01-02 BS EN ISO 9170-1: 2008 suitable for dispensing medical gases and vacuum services to the secondary devices from the distribution network all as specified and as directed.

Supplying, installing, testing and commissioning of CE certified micrometrical regulation type BPC flow meter for oxygen system, range 0-15 LPM, chromium plated brass body with graduated flow tube, cover and unbreakable polycarbonate humidifier bottle, needle valve for flow adjustment, brass adapter and fixed complete with necessary saddle all as specified and as directed.

Supplying, installing, testing and commissioning of CE certified isolation valve, brass body, 15mm dia, regular type, fixed to copper pipe line all as specified and as directed.

All as described in item No. 01 but 22mm outer dia

Supplying, installing, testing and commissioning of line pressure gauge, o2 vacuum type complete all as specified and as directed.

Supplying, installing, testing and commissioning of CE certified microprocessor controlled dual type 2 gas digital areal alarm for oxygen/ vacuum failure, low/ high pressure alongwith all necessary acessories all as specified and as directed.

Supplying, installing, testing and commissioning of CE certified Semi Automatic Oxygen Control Panel board with 3+3 manifold, wall mounted type, fabricated with high quality Stainless steel sheet of suitable size, openable type with locking arrangements, with and including high pressure Non Return Valve hydraulically tested at 300 bar, pressure gauge for indicating the gas pressure of each header and pipe line distribution pressure and built- in LED display to indicate high, normal and low line pressure all as specified and as directed.

Supplying, installing, testing and commissioning of CE certified wall mounting type emergency manifold system suitable for 2+2 oxygen cylinders, fabricated with 5/8”X15G Copper pipe as per BS EN 1057 & Brass Blocks equally spaced at 250 mm fitted on duly powder coated MS frame, with high pressure Non Return Valve hydraulically tested at 300 bar & 1.25m long 5/16”X 16G Copper Tail pipe 4 cylinder capacity including cylinder holding chains all as specified and as directed.

Supplying, installing, testing and commissioning of vacuum system consisting of 1 No. of vacuum pump with motor, electrical switch gear automatic switchover control system, vacuum receiver, pressure regulators, valves and all necessary fittings with the following specifications all as specified and as directed.

Vacuum pump: Oil free air cooled, reciprocating single stage, No load starting, base mounted type - 1 No. (Make Anest Iwata)

Motor: Induction type belt driven, 5 HP, 3 Phase, 1500 RPM - 1 No. (Make: Crompton Greaves/ Kirloskar)

Vacuum receiver tank: CE certified Stainless steel body, 500 litres capacity 11 bar (1.1 MPa) fitted with a zero loss electronic drain valve, pressure safety valve capable of passing the compressor at 10% relief valve and pressure gauge -1 No. (Make: Anest Iwata)

Supplying, installing, testing and commissioning of CE certified unbreakable polycarbonate Ward Vacuum Unit, 1000ml. capacity, including aluminium vacuum regulator with a On-Off knob with regulating wheel and a vacuum dial gauge of range 0-760 mm Hg fitted on the regulator all as specified and as directed.

Supplying, testing and commissioning of medical suction trolley with aluminium alloy centre post with 5 plastic wheels, suitable for integrating 4 vacuum canisters of 1000ml. capacity including regulator valves, jars, pressure tubes and 5m hose with the gas probe all as specified and as directed.

Medical Eleborate Concept Pvt Ltd

metro electrical services

E M CONSTROL SYSTEM

DURGAI ELECTRICALS