Maintenance work for govindan chetty community hall in ward 50

Picking the damage Cement Plastering on Wall Surface Vol -I PWD data 25-26 page -34

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification mdu Building data 25-26 pg no-2

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specificationsmdu Building data 25-26 pg no-7

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete PWD vol-1 24-25 pg no 98

Painting old wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour mdu data 25-26 pg no-14

Painting Old iron work with Two coat for doors, windows, ventilators of Synthetic Enamal paint over a priming coat including cost of primer etc., complete mdu data 23 - 24 P - 6

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia /PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc.,complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting mdu data 25-26 pg no-17

Supply and delivery and fixing of G.I. Pipes and specials as per IS Specification. 110mm PVC. Pipe Vol I 25-26 PWD P-158

32 mm PVC. Pipe Vol I 25-26 PWD P-158

50mm PVC Coupler Vol I 25-26 PWD P-172

110mm PVC Elbow Vol I 25-26 PWD P-165

32mm PVC CouplerVol I 25-26 PWD P-159

32mm PVC ElbowVol I 25-26 PWD P-160

32mm PVC TeeVol I 25-26 PWD P-161

Supplying and fixing of 48” AC ceiling fan with 300mm down rod on the existing clamp with regulator with complete set Electrical data 25-26 SD-494

Supply and fixing of single box type 18Watts 4'Feet LED flu Fitting complete with wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. Electrical data 25-26 SD-441

Supply and fixing of 30W LED Street Light Fitting with LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE).Electrical data 25-26 SD-456

Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., (Size 60X60X75cm) MDU-CORP-BUILD-DATA-25-26 P-23

Removing the existing Fully Damaged Paver block M40 Grade 80mm thick & 60mm thick in the rate including Removing and Stock to the same site and tranporting loading unloading and labour charges and other tools etc. complete as per Standard Specification.MDU-CORP-Road -DATA-25-26 P-19

ReFixing of Existing Removed Paverblock M40 grade 80mm thick &60mm thick inuniform shape of approved make to be laid influrring bone pattern with stone dust cushion below the uniform shap of approved nonskitting surface in the top and the rate including levelling the base preparation of pavers as subbase,stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paverblock as per standard specification MDU-CORP-Road -DATA-25-26 P-19

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers MDU-CORP-BUILD-DATA-25-26 P-15

Fabriction supply and erection of tobulor post with Truss(100mm,80mm,75mm)The Rate shall be include the cost of tobulor post Truss Kg members,labour charges for manufacturing and erection and Paintingetc.,complete.as departmental specification and drawings

Add GST 18%