SPL REPAIRS TO BLOCK NO 109 TO 112 AT OLD CANTT OF GE (N) PATIALA AT PATIALA MIL STN

Amount

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud in roofs any thickness including plastering and leaping complete all as specified and directed.

Scarping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed.

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:100, complete all as specified and directed.

Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over and including applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

S&F factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mm x 22mm, machine pressed, as on roof surface, confirming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately), set jointed and pointed with grey cement slurry complete all as specified and directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

S&F Built in steel cup board with pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 01 mm thick Godrej pattern fixed to masonry wall by hold fasts, made out of 25 x 3 mm flat iron including dully spray painted with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces including taking down old existing wooden cup board including cutting hole making good disturbed portion in CM (1:3) to receive fresh PCC all as directed and shown on Drg. No. 178 sheet 1/4 to 4/4 dt12.05.2001. (Shelves shall be measured and paid for separately).

Demolition of brick work including all quoins arches pillars etc built in cement mortar.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus.

PCC 1:7:12 type F-2 using 40 mm thick brick aggregate as in filling of sunken portion completed all as specified.

25mm thick PCC 1:2:4 type B0 using12.5 mm graded stone aggregate as in sunken floor complete as specified and directed.

Rendering 15mm thick on concrete surface in Cement mortar 1:3, finishing surface mixed with integral liquid WPC as manufacturer's instruction as in sunken portion complete as specified & directed.

Taking down cement plaster on brick walls built in cement mortar including raking out joints and concrete surfaces as in wall or ceiling etc. including hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick on brick or concrete surface in Cement mortar 1:4, finishing surface w/o using extra Cement, mixed with integral liquid water proofing compound complete all as directed and specified.

Supply only integral water proofing compound.

10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

M&L Applying acrylic wall care putty in external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (thickness vary from 0.56 to 1 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

M&L Applying 02 coats of exterior emulsion paint (light shade) by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

M&L Applying 02 coats of interior emulsion paint (light shade) to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

M&L Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) to ceiling surfaces of wall or false ceiling over & including a coat of interior primeras recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

M&L for preparing new plasterd surfaces of ceiling and applying three coat white wash complete all as sepcifeid and directed complete.

M&L for preparing old plasterd surfaces of ceiling and applying one coat white wash complete all as sepcifeid and directed complete.

M&L for preparing new plastered surfaces of walls and applying three coat whitewash complete all as specified and directed complete.

M&L for preparing old plastered surfaces of walls and applying one coat whitewash complete all as specified and directed complete.

Demolition of cement concrete in floors and pavings n. exc 15 cm thickness below or above ground level, complete all as specified and directed.

50mm thick, PCC 1:3:6, type C-2 using 20 mm graded stone aggregate, as in plinth protection finished even & fair without using extra cement complete all as specified and directed .

25mm thick, PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate), as in floor, sub base finished fair & even without using extra cement complete all as specified and directed .

Dismantling floor hearth or wall tiling including cement mortar bedding, removing serviceable tile to store and rubbish off the premises.

M&L for , Ceramic, joint free, premium quality coloured tiles 600 X 600 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for non-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border as in flooring and the like works 20 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for 16 to 18mm thick granite work (table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and the like in cement mortar (1:4) 20 mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment and complete polishing and bull nosing at reqd places complete all as specified.

Machine cut kota stone slab as in steps of staircase and midlanding portion 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide kota of 18-20mm thick as per pattern approved over & including screed of 20 mm thick in cement mortar (1:4) and pointed in white cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for rubber moulded coloured chequered tiles 30cm x 30cm x 22mm thcik with grey cement and pigment, set jointed and pointed in neat cement slurry as in floor/path including and over 20 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in sub base of path or hard standing 100mm thick complete all as specified and directed.

M&L machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 grade and including filling of interstices with fine sand over and including 25mm thick layer of sand cusion over 75mm thick PCC 1:4:8 type D-2 (40mm graded stone agg), complete all as specified.

Repair to RCC Chajjas, bands, shelves, beams, column or slab and similar work filling of cracks with PCC 1:2:4 and rendering 10mm thick in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S&F factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm complete all as specified and directed.

S&F factory made Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm complete all as specified and directed.

S&F factory made flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board 3 mm thick plywood face panel commercial type on both side incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and incl supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) incl two coat of synthetic enamel painting over a coat of pink primer complete all as specified and including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

M & L for Powder coated (Minimum thickness of powder coating 50 micron ) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

M & L for Aluminium window (Casement & sliding) and ventilator shutters with 50 micron powder coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc. and aluminium beeds in inner shutters complete fixed in all respect as specified & directed by Enginner-in-Charge. Note :- EPDM gasket shall be measured as supply only separately

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/ lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and watr tight etc aluminium beads 20mm size with and complete all as specified and directed by Engr-in - charge.

S&F 4mm thick tinted glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed by Engr-in-charge

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed by Engr-in-charge

S&F stainless steel (304 grade) finished butt hinges 75mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 100mm long complete all as specified and directed by Engr-in-charge.

S&F powder coated aluminium handles 150mm complete all as specified and directed by Engr-in-charge

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed by Engr-in-charge

S&F 4mm thick frosted glass fixed to aluminium ventilator including necessary EPDM gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed by Engr-in-charge

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fancy type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

M&L for Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I 'P' trap long size) joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in CM 1:3 all as directed and specified.

S&F vitreous china premium/1st quality wash basin (under counter), off white, size 580x430 mm including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge. Note : The items for counter will be measured and paid seperately.

S&F Vitreous china wash down water closet pan including seat cover (Pedestal pattern), white (excluding flushing cistern and flush pipe), (Fixed in repairs) P or S trap, including taking down old unserviceable existing one complete all as specified and directed by Engineer-in-Charge.

S&F Health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Concealed Stop Cock, fancy type chromium plated with long shank and cup, exposed part kit with all flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete all as specified and directed.

S&F Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F towel rack CP 60 cm long with lower hanger / hook fixed in position complete all as specified and directed.

S&F single liver basin mixer with popup waste system and 450 mm long braided hoses, fancy type, cast copper alloy, with capston head chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts screwed for 15 mm bore of iron pipe complete all as specified and directed by Engineer in Charge.

S&F single lever Sink mixer with swinging spout with connecting legs and wall flanges, wall mounted fency type chromium plated cast copper alloy screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engineer in Charge.

S&F Bathing mixer fancy type, chromium plated 15mm bore, telephonic and including connected accessories , complete all as apecified and directed. Make : Jaquar (Cat No SOL-6219)/Prayag (Cat No -7265)/ Hindware (Cat NO - F110016CP)..

S&F Stainless Steel sink with drainage board, AISI 304 quality grade, 0.80 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x 460mm / 928mm x 458mm with bowl size 410 mm x 355mm x 185mm / 430mm x 355mm x 200mm including strainer of minimum 110 mm dia and making good disturbed portion in cement mortar 1:3 or PCC 1:2:4 type B0 complete all as specified and directed by Engineer in Charge.

PVC (HDPE) SWR, 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per manufacturer's instruction, including reducer, socket, bends, TEE etc and laid in wall / floor for connecting bottle traps complete all as specified and directed by Engineer in Charge.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer in Charge.

S&F Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 900x750x250mm weight not less than 3.5 kg.

S&F Brass chromium plated shower roses 125mm size with swivel joint any size fixing in repairs all as directed and specified.

450mm long PVC connection of approved quality with brass check nuts at both ends for 15mm bore pipe complete all as specified and directed.

Bib tap cast copper alloy chromium plated, fancy type long body, with capstain head handle screwed down screwed for iron pipe and fixed fo 15mm bore pipe after taking down of old brass bib tap complete all as specified.

S&F Rotational moulded polythene water storage tanks, double layered (Cylindrical vertical with closed top) of capacity 500 ltrs, hoisted and fixed in position as in repair and taking down old one complete all as specified.

Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed.

M&L 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

M&L for cast iron multifloor trap / nahni trap 100 mm dia and 450mm long including jointing with solvent cement fixed in repair complete all as specified and directed by Engineer in Charge.

Cast Iron gully traps,Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' including CI grating fixed in repair complete all as specified abd directed.

Supply and fixing in repairs MS powder coated peg set of Six complete.

S&F in repairs stainless steel soap dish approx size 100x80mm fixed to walls of approved make complete all as specified.

S&F in repairs stainless steel grating with anti-foul self closing cockroach trap of 100 mm dia for floor/nahni traps complete all as specified.

S&F cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 100 mm bore including stack clamps, nut bolts etc. and making necessary connections, fixed in repairs complete all as specified and directed by Engineer in Charge..

S&F cast iron spun pipes soil waste & vent pipe in any length with or without ears with cement joints fixed to walls 75mm bore in and including stack clamps, nut bolts etc. and making necessary connections, fixed in repairs complete all as specified and directed by Engineer in Charge..

S&F 100mm bore cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete.

S&F 75mm bore cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete.

S&F CI bend (any radius) of 100 mm bore in repair.

S&F CI bend (any radius) of 75 mm bore in repair.

S&F CI bend (any radius) with oval access door of 75 mm bore in repair.

S&F CI cowl 100 mm bore.

Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard.

110mm bore PVC(SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls with and including holder bat clamps made out of 40mm by 3mm FI and 12mm dia round iron stays and making good the disturbed portion in CM 1:3 to match with surrounding area, complete all as specified and directed

PVC(SWR) bends for 150mm bore rain water pipes with rubber ring joints complete all as specified and directed

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc.complete fixed in position all as specified and directed.

Dismantling wooden boarding of any description, fixed in any position with nails as complete all as specified and directed by Engineer-in-Charge.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete all as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / Jain brother & Co /Ganesh plywood.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / Jain brother & Co /Ganesh plywood.

S&F 12 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply fixed with SS screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed. Make : Rajshri Plastiwood / Jain brother & Co /Ganesh plywood.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, Make KAFF/Hettich/Harrison/Godrej

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. Make KAFF/Hettich/Harrison/Godrej

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. Make KAFF/Hettich/Harrison/Godrej

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified. Make : Hettitch/Godrej/Kaff/Harrison

Taking down carefully existing points wiring on surface conduit/concealed conduit including conduit from surface and expect conduit in concealed wiring for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc removing materials to store for keeping in safe custody of contractor for which the credit has been considered under schedule of credit and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for Point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor for one light/fan/bell point in and including NEW PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed by Engr-in-charge. Notes: (i) Cost of Pressed steel Terminal Boxes and modular Top cover plate shall be included in point wiring. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth.(iii) -Cost of Eye/bottle thimbles used for connection in switches/sockets & MCBs in DBs shall deemed to be included in the unit rate quoted for this item.

All as per Sl item No 112.00 above herein before but one socket out let 5 pins 5 Amp on the same board with other switches complete all as specified and directed.

All as per Sl item No 112.00 above herein before but for one socket out let 5 pins 5 Amp on independent board complete all as specified and directed.

All as per item No.112.00 herein before but 2.5 Sqmm PVC insulated and unsheathed FRLSH single core multistranded copper conductor incl 2.5 Sqmm PVC insulated and unsheathed FRLSH copper earth wire for switch socket combination 3 pin 15 amps on independent board.

S & F in replacement of Modular switch 1 way, 6 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular switch 1 way, 16 Amps, 1 module, 230 volts complete all as specified.

S & F in replacement of Modular socket 5 pin 6 Amps, 2 module 230 volts complete all as specified.

S & F in replacement of Modular socket 5 pin 6 &16 Amps, combination type 2 module complete all as specified.

S & F in replacement of Modular Fan regulator step type, 120 watts, 2 module complete fixed as in repair all as specified.

S & F in replacement of ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed

S & F in replacement of New generation energy saving and environmental friendly long life LED building security light 1x35 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed by Engineer-in-charge.

S & F in replacement of Surface Mounted LED Bulk Head Luminaire of capacity 10 watt with ABS Body & Polycarbonate Diffuser, IP54 inc connection with ,with flexible wire 0.5 sqmm copper cable all as specified & directed by Engr-in-charge.

Supply and fix in replacement of Sheet metal enclosure 8 ways double door for DBs when MCBs are to be used 240,volts including 200 Amps standard bus bar of suitable size and common neutral link all flush mounting type, drilling holes for incoming and out going cables with IP43 protection complete all as specified & directed by Engr-in-charge.

S & F in replacement of MCB, single pole 240 volts 6 to 32 Amp capacity for fixing in DB’s including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of MCB , SPN, 240 Volts ,40-63 amp for fixing in DBs of including proper thimble connections complete all as specified and directed by Engineer-in-Charge.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4.00 Sqm Copper conductor Earth wire shall be measured as one unit) Note2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

S & F in replacement Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed by Engr-in-charge.

Supply and fix in replacement of 9/12 Watt LED light fitting decorative type wall mounting fixer including LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by Engineer-in-charge. Make: Philips, Havells, Wipro.

Taking down and refixing of ceiling fan after supply and replacement of rubber reel, round cover plate of size 6 inch of ceiling fan complete with ms split clamp two Nos, nuts and bolts complete all as specified and directed by Engr-in-charge.

Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm metal body, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including frame and Louver complete all as specified and directed by Engineer-in-Charge. Note: Removal of existing exhaust fan from Bunglow and depositing to the AGE E/M store will be catered in this item.

Supply and fix Exhaust fan AC single phase 230/240 v of size 300 mm sweep 900 rpm sturdy Engineering plastic, high efficiency motor, dynamically balanced blade for better performance and corrosion-resistant powder coated metallic finish including frame and Louver complete all as specified and directed by Engineer-in-Charge. Note: Removal of existing exhaust fan from Bunglow and depositing to the AGE E/M store will be catered in this item.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with MCB SPN 32 Amps, complete all as specified and as directed by Engineer-in-charge.

Taking down of Geyser 25 ltr and submitting to AGE E/M Store as drirectd by EIC. Note: Cost of transportation has been catered in this item.

Refixing of Geyser after replacement of Old PVC connection pipes with new PVC pipe ( Set of 2 ), new Anchor bolts, new back plate if required for fixing of geysers as directed by EIC. Note: Cost of transportation from AGE E/M Store back to site of installation has been catered in this item

S & F MCCB, 4 Pole, 125 A, 25 KA for fixing in DB including proper thimble connection, thermal and magnetic release protection complete all as specified and directed by Engineer-in-charge.

Supply and fix in replacement of epoxy power coated MCCB distribution box double door VTPN 4 way vertical type AC 415 V with IP 43 protection for MCBs alongwith provision of MCCB as incomer with commen bus-bar at incoming end of outgoing MCBs grouted/ flush to wall, complete all as specified by Engineer-in-charge. (Note :- MCCB will be measured and paid under seperate item) (i) Cost of Eye/bottle thimbles used for connection MCBs in DBs shall deemed to be included in unit rate quoted for this items, (ii) Electric wiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. all the vacant holes of the DB shall be provided with blank plates of appropriate size complete all as specified and directed by Engr-in-charge.

XLPE Insulated ,screened, PVC bedded, galvanized steel wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core supplied & laid in replacement complete all as specified& directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Material and labour for sand cushioning for cables 8 cm below the cable and 15 cm above with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming completed all as specified and directed.

Cutting of hardstanding floor/wall for laying of cable including matching with suface by using cement concrete all as specified and directed.

Supplying & laying factory made unreinforced Precast concrete cable covers class LV type 1, flat, Size 250x150x40mm laid in trenches as protection to cables complete all as directed by Engr-in-Charge

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

M & L for Earthing complete with galvanized iron earth plate electrode of size 600x600x6.0mm , buried directly in ground (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts , nuts , check nuts and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate 20 mm dia watering pipe medium grade 1.70 mtr long with a plug at top, GI protection pipe light grade 15 mm dia from earth pit to main board including PCC pit in cement concrete 1:2:4 along with CI frame and cover 10mm thick duly hinged to CI frame as shown in the electrical plate No3 of SSR 2009 part 1 specification at page 497.

Arneja Builders (BID ID -3316472)

Jawandha Enterprises (BID ID -3322436)

AR CONSTRUCTIONS (BID ID -3328280)

NORTON BUILDER (BID ID -3321291)

Buttar Construction Co. (BID ID -3321473)