84027/E8 IMPROVEMENT TO CERTAIN SMQS AT AF STATION JORHAT PH I UNDER GE AF JORHAT

Amount

B/R SERVICES/WORKS

Demolition Cement Concrete (Un-reinforced) of any description in Ground Floors, Pavings, etc., not exc. 150mm thickness (above or below Ground Level) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Un-reinforced) in any Position not otherwise specifically Provided for and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Cement Concrete (Reinforced) Roofs, Floors (other than Ground Floors), Beams, Staircases, Landing, Chajjas and Similar Suspended Work including Rein-forcement cut as required to facilitate Demolition and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Demolition Brick Masonry Work, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.

Taking down Chowkats or Frame (without Taking Off Shutter from the Frame) of any description, not exc. 1.50 Square Metre Each, complete all as specified and as directed.

Taking down Chowkats or Frame (without Taking Off Shutter from the Frame) of any description, exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.

Taking down/out Unserviceable Rusted/Worn out Wire Cloth/Netting of any description, fixed with Beads, etc., complete all as specified and as directed.

Hacking out Broken Glass of any description from Wooden or Metal Frames, or Stone, Concrete or Brick surrounds of any thickness or size; Hacking out Old Putty or Removing Beads, etc., complete all as specified and as directed.

Dismantling Asbestos Cement (Corrugated, Semi-corrugated, etc.) Sheets in Roof Coverings of any thickness, complete all as specified and as directed.

Dismantling Plain or Corrugated Steel Sheet or Galvalume Sheet of any gauge and thickness, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Dismantling Stone Slabs or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and Removing Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Fittings/ Connections of any description from any Situations, Segregating the Serviceable Pipes and Stacking Properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Fittings/ Connections of any description from any Situations, Segregating the Serviceable Pipes and Stacking Properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down PVC (SWR) Soil, Waste and Ventilating Pipe of any Size/ bore (dia) with Fittings of any description from any Situations, Segregating Serviceable Pipes and Stacking Properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.

Dismantling Cast Iron Pipes 100mm bore (dia), Jointed in Cement Mortar and Taking out of Trenches, if required, Segregating Serviceable Pipes and Stacking Properly at Sites and Keep in Safe Custody for re-use, complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in Depth and Getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in with approved Soil including Spreading, Leveling, Watering and Well Ramming in Layers not exc. 25 Cm thick in Soft/Loose Soil, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (12.5mm graded stone aggregates) in Filling of Pressed Steel Frame, Finishing all Exposed Faces of Concrete, complete all as specified and as directed.

M&L Reinforced Cement Concrete 1:2:4 (Nominal Mix) (20mm graded stone aggregates) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (Nominal Mix) (20mm graded stone aggregates) in Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (Nominal Mix) (20mm graded stone aggregates) in Beams, Roof Beams, Lintel Bands, Cantilevers, Bressummers, Lintels over 1.50 Metre Span, etc., complete all as specified and as directed. NOTE : Reinforcement and Formwork will be Measured and Paid for separately under appropriate Items.

M&L Reinforced Cement Concrete 1:2:4 (Nominal Mix) (20mm graded stone aggregates) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.

M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams and Similar Work; Square, rectangular or polygonal, Vertical or to batter, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides of Pillars, Posts, Struts, Piers, Columns and Stanchions, Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunching, Bressummers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.

M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick Work Half Brick thick with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan to any Radius, built in Cement Mortar 1:4, complete all as specified and as directed.

M&L Cutting Holes in Brick Walling, exc. Half Bricks and not exc. One Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregates) or Cement Mortar 1:3 (as required) and Adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

S&F Pressed Steel Frame of Size 125x60mm made out of 1.25mm Steel Sheet for Doors with One or more Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed.

S&F Pressed Steel Frame of Size 105x60mm made out of 1.25mm Steel Sheet for Doors with One or more Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed.

S&F Flush Shutter 30mm thick, Solid Core Construction, with Block Board Core and Plywood Face Panels, Commercial type on Both Sides including Teakwood Lipping 6.0mm thick, fixed with Nails, complete all as specified and as directed.

M&L Second Class Hardwood (well-seasoned) Glazed and Skeleton Shutter 35mm thick, Open Rebated and Prepared to Receive Gauze, etc., (without Sash Bars), Edges of Framing Plain, Chamfered or Rounded, fitted with cut and Mitred Beads for securing Glass, Gauze, etc., Sizes of Members of Shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) and fitted to Chowkats, complete all as specified and as directed. NOTE : Cost of Second Class Hardwood Beads for Fixing of Gauze, etc. will deem to be included in the Quoted Unit Rate. However Wire Clothes, etc. will be Mesaured and Paid separately under appropriate Item here-in-after at Sl No. 1.047

S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm Plain Colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening, complete all as specified and as directed.

M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain Colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/ fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Butt Hinges will be Measured and Paid under appropriate Item.

S&F Aluminium Powder Coated of any Colour (Thickness of Powder coating 50 micron minimum) Window, Sliding type, 3-Track with Frame Section 100x35x1.2mm and 3 No. Shutters Section 40x18x0.9mm, Two Glass Shutters with Plain Float Glass of 4.0mm thick and One Gauge Shutter provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate.

S&F Aluminium Powder Coated of any Colour (Thickness of Powder coating 50 micron minimum) Window, Sliding type, 2-Track with Frame Section 50.3x26x1.2mm and 2 No. Shutters Section 40x18x0.9mm, One Glass Shutter with Plain Float Glass of 4.0mm thick and One Gauge Shutter provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate.

S&F Aluminium Louvered Ventilators of Frame Section 50.3x26x1.2mm and 1 No. Shutter Section 40x18x0.9mm, Half Portion Adjustable type Louvers including Frosted Glass 3.0mm thick and another Half Portion provided with Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm, Fixed type on Outside Frame including necessary Joining Cleats, Glazing Clips, EPDM Rubber/ Neoprene Gasket Packing and Anodised Aluminium Fittings viz Locking arrangements, etc. all as per requirment at Site of Work, complete all as specified and as directed. NOTE : Cost of Glass, Wire Clothes, Aluminium Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Anodised Aluminium Fittings, Screws, etc. all as per requirment at Site of Work will deem to be included in the Quoted Unit Rate.

S&F Anodised Aluminium Grill (Anodised Transparent or Dyed to required Shade according to IS: 1868 with minimum Anodic Coating of Grade AC 15) of Approved Design/ Pattern, with Approved Standard Section and fixed to the existing Window Frame with C.P. Brass/ Stainless Steel Screws @ 200mm Centre to Centre, including Cutting the Grill to proper Opening Size for Fixing and Operation of Handles and fixing Approved Anodised Aluminium Standard Section around the Opening, complete all as per requirement at Site of Work, complete all as specified and as directed.

S&F Aluminium anodised Barrel Tower Bolt, 200mm long, Extruded Section, complete all as specified and as directed.

S&F Aluminium alloy, anodised, Sliding Door Bolt 250mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy, complete all as specified and as directed.

S&F Stainless Steel Butt Hinge 100mm in size, fixed to Frame, complete all as specified and as directed.

S&F Aluminium Handle 150mm long, Cast type, anodised, extruded and fixed, complete all as specified and as directed.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average Width of Aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary, Glazing in Wooden/ Metal Frames and glazed with Oil Putty or Wooden Beads/ EPDM Rubber/ Neoprene Gasket as per requirment at Site of Work not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. NOTE : Cost of Oil Putty or Wooden Beads/ EPDM Rubber/ Neoprene Gasket will deem to be included in the Quoted Unit Rate.

M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, Hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, Cut to length, Bent to Shape required including Cranking, Bending Spirally for hooping for Columns, Hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L Wire Brushing & Cleaning Top Surface of RCC Roof Slabs, Flashings and Junction of Parapets, etc., Applying/ Brushing Neat Cement Slurry with 3.0 KG of Cement Per Square Metre, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (12.5mm graded aggregate) Padding 25mm (ave.) thick, laid in Slope 1:40 at Top of RCC Roof Slabs/ Surfaces or Roof Kerbs including Mixing with Integral Water Proofing Compound as recommended by Manufacturer, Finish Concrete Surfaces Fair and Even, complete all as specified and as directed. NOTE : WPC will be Measured and Paid separately under Sl No. 1.068.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Padding on RCC Roof Slabs, when the Concrete is Green, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M&L Applying Evenly a coat of Bitumen Primer @ 0.40 Litre Per Sqm by the same Membrane Manufacturer after Proper Cleaning of Plastered Surfaces, complete all as specified and as directed.

M&L APP based Polymeric Membrane Minimum weighing 3.00 Kg Per Sqm and Minimum 3.0mm thick, Reinforced with Polyester Non-woven Fabric (Weight not less than 150 Grams Per Sqm), laid on Primed Surface with Side Overlap of 80mm and End Overlap of 100mm using Bitumen Torch or by LP Gas Torching and Sealing all Joints, etc. and ensuring complete Thermo Fusing and Applying One coat of Aluminium Paint over it, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Flooring, etc., laid in Alternate Panels, finished Concrete Surfaces Even and Smooth with using Extra Cement, complete all as specified and as directed.

M&L Glass Dividing Strips 38mm Wide and 3.0mm thick and inserted in Position, conform to Design, complete all as specified and as directed.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular or Square), Area of Each Tile exc. 0.06 Sqm but not exc. 0.11 Sqm (1st quality) in Floors, Set and Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Rectangular or Square), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Set and Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L Glazed Ceramic Coloured Tiles 300x200x7mm/ 300x450x7mm/ 350x250x7mm/ 450x350x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed and Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platform, etc. in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with admixture of Pigment to match with Shade of Granite, Fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deem to be included in the Quoted Unit Rate.

M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Ceiling of Concrete Surfaces, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick or Concrete Surfaces, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 on Brick or Concrete Surfaces, finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:3 on Fair face of Brick Work or on Concrete Surfaces (Chajja and Similar Works, etc.) including Mixing with Integral Water Proofing Compound as recommended by Manufacturer, Finish Plastered Surfaces Even and Smooth using Extra Cement, complete all as specified and as directed. NOTE : WPC will be Measured and Paid separately under Sl No. 1.068.

Supply only Integral Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces on Walls and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Old Plastered Surfaces on Walls and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces on Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L Preparing Old Plastered Surfaces on Ceiling and applying One Coat of White Wash, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat), complete all as specified and as directed.

M&L Complete Removal of existing Surface Treatment on Walls and Applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat), complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and Applying Two or More Coats of 100% Premium Acrylic Emulsion Paint having VOC less than 50 Gram Per Litre and UV Resistance as per IS 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint of required Shade (Company Depot Tinted) with Silicon Additives @ 1.43 Litre Per 10 Sqm over and including Priming coat of Exterior Primer applied @ 0.90 Litre Per 10 Sqm, complete all as specified and as directed.

M&L Complete Removal of existing Surface Treatment on Walls and Applying Two or More Coats of 100% Premium Acrylic Emulsion Paint having VOC less than 50 Gram Per Litre and UV Resistance as per IS 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint of required Shade (Company Depot Tinted) with Silicon Additives @ 1.43 Litre Per 10 Sqm over and including Priming coat of Exterior Primer applied @ 0.90 Litre Per 10 Sqm, complete all as specified and as directed.

M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Old Painted Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L Preparing Old Painted Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint), complete all as specified and as directed.

M&L Preparing Steel and Iron Surfaces of any descriptions, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of approved Tint) over a Coat of Pink Primer, complete all as specified and as directed.

M&L Preparing Previously Untreated Surfaces of any description and Girth not otherwise described and Treating with Tar or Coal Tar Black Paint to Holdfast or Similar Small Articles, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed.

S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refixing Old Steel Tubing 15mm bore (dia) and Fittings (Serviceable Pipes and Fittings obtained from Sl No. 1.014 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes & Fittings by using Wire Brush including provision of New GI Fittings (as required ordered at Sites), complete all as specified and as directed.

S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.

Refixing Old Steel Tubing 20mm bore (dia) and Fittings (Serviceable Pipes and Fittings obtained from Sl No. 1.015 here-in-before) in New or Old Position (Walls, Ceiling, Floors, etc.) including Cleaning both Inner and Outer Surfaces of Pipes & Fittings by using Wire Brush including provision of New GI Fittings (as required ordered at Sites), complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Stop Cock/ Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Union and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 15mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule and Providing Water Connections with and including GI Tank Nipple 20mm (02 No. in Each Tank) including Dismantling/ Lowering down Unserviceable Water Storage Tank exc. 250 Litre but not exc. 500 Litre Capacity of any description after disconnecting of Water Supply Connections, complete all as specified and as directed.

S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

M&L Disconnecting all Water Supply Pipe Connections and Lowering down or Setting aside after draining out Water, Cleaning & Removal of all Scales, Dirts, etc. from the Tank of capacity exc. 250 Litre and not exc. 500 Litre and Mouths of Circulating Pipes, etc. Cleaning the Tank by scrubbing the deposits with Wire Brush after draining out Water from the Tank, Re-hoisting the Cleaned Tank in Original Position and Re-fixing/Re-connecting Inlet and Outlet Pipes and Writing Letters "CLEANED ON : DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not less than 30mm in Height on Body, complete all as specified and as directed.

M&L Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including Provision of Lime Concrete Bedding and Making Good to Floor/ Disturbed Surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type, ISI Marked (IS:7231) with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted, including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F Kitchen Sink with Drainage Board, made of Stainless Steel l.0mm thick, Overall Size 915x460mm having Bowl Size 410x330x160mm with Plugs, Washers and Stainless Steel Waste Fittings, etc. including Bedding in Cement Mortar to dwarf Wall or fixing Cantilever Brackets and connecting Union to Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F PTMT Waste Coupling of Size 32mm having Minimum Weight 45 Gram (Half or Full threaded) and Fixed-in-repairs, complete all as specified and as directed.

S&F Kitchen Plate Rack of Overall Size 915x915x255mm with 3 Shelves, made of Stainless Steel l.0mm thick and fixed to Wooden Plug with Brass Chromium plated Screws and Fixed-in-repairs, complete all as specified and as directed.

S&F Low Density Polyethylene Pipes (LDPE) 32mm bore (dia) of Pressure ratings 6.0 Kg/Sq Cm and fixing to Walls, Ceiling or in Floors, etc. and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC Connection Pipe 15mm in size and 600mm in length with PTMT Nuts and Fixed-in-repairs, complete all as specified and as directed.

S&F Swivel Shower of PTMT (minimum Weight 40 Gram), any Colour for fixing with 15mm GI/ Steel Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Towel Rail 600mm Long of PTMT (minimum Weight 190 Gram), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed.

S&F Stainless Steel Soap Dish, not less than 150mm in size (as approved), fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats and Fixing-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Floor Trap 75mm bore (dia) with Chromium Plated Grating, Plain including Jointing to Waste Pipe with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, complete all as specified and as directed.

Refixing PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints (Serviceable Pipes obtained from Item No. 1.016 here-in-before), fixing to Walls or laid on Floors including Cleaning both Inner and Outer Surfaces of Pipes, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Bends (any Radius) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) PVC (SWR) Junction, Single (Single T), Equal or Unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, Laid in Trenches, complete all as specified and as directed. NOTE : Nessary Earth Works will be Measured and Paid for separately under appropriate Items here-in-before.

S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid on Floors, complete all as specified and as directed.

Refixing PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints (Serviceable Pipes obtained from Item No. 1.016 here-in-before), fixing to Walls or laid on Floors including Cleaning both Inner and Outer Surfaces of Pipes, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Bends (any Radius) and Jointing with Solvent Cement, complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) PVC (SWR) Junction, Single (Single T), Equal or Unequal and Jointing with Solvent Cement, complete all as specified and as directed.

S&F Cast Iron Soil, Waste and Vent Pipes 100mm bore, Sand Cast, in any Length with or without Ears, Laid in Trenches and Jointed with Cement Mortar 1:2, complete all as specified and as directed. NOTE : Nessary Earth Works will be Measured and Paid for separately under appropriate Items here-in-before.

S&F Cast Iron Soil, Waste and Vent Pipes 100mm bore, Sand Cast, in any Length with or without Ears, Laid in Floors or Fixed to Walls and Jointed with Cement Mortar 1:2, complete all as specified and as directed.

Refixing Cast Iron Soil, Waste and Vent Pipes 100mm bore, (Serviceable Pipes obtained from Item No. 1.017 here-in-before) in New or Old Position (Walls, Floors, etc.) and Jointed with Cement Mortar 1:2 including Cleaning both Inner and Outer Surfaces of Pipes by using Wire Brush, complete all as specified and as directed.

S&F Cast Iron Bends (any Radius), Diminishing Pieces or Tapers (Larger bore Measured) having Oval Access Doors suitable for fitted with Cast Iron Pipe 100mm bore, complete all as specified and as directed.

S&F Cast Iron Branch Piece, Single (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches having Oval Access Doors suitable for fitted with Cast Iron Pipe 100mm bore, complete all as specified and as directed.

S&F Cast Iron Branch Piece, Double (Equal or Unequal), Ordinary or Inverted (Spigot or Socket type) or with Parallel Branches having Oval Access Doors suitable for fitted with Cast Iron Pipe 100mm bore, complete all as specified and as directed.

S&F Cast Iron Cowls 100mm bore and fitted with Cast Iron Pipe 100mm bore, complete all as specified and as directed.

M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 100/110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

E/M SERVICES/WORKS

M&L Taking down carefully Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete from in any Position including Fixture and Fittings such as Switches, Ceiling Roses, Pendants, Regulators, Sockets (but excluding Light Fittings of any descrip-tion), etc, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. with Cement Mortar 1:3 and Providing Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the existing Finishes at Site of Works, complete all as specified and as directed.

M&L Taking down/out Unserviceable Sub-main Wiring from PVC Casing Capping/ Conduit of any description, Serviceable Materials such as Sub-main Wires, PVC Casing Capping/ Conduit and it's Fittings, etc. keep in Safe Custody for Refixing/ Reuse, Making Good Disturbed Surfaces of Walls/ Floor/ Ceiling, etc. with Cement Mortar 1:3 including Providing Surface Treatment to match the Existing Treatment/ Finishes at Site of Works, complete all as specified and as directed.

Taking down MCB DB/ Main Switch of any description including Making Good Disturbed Surfaces of Walls/ Ceillings, etc. with Cement Mortar 1:3 and Providing Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes at Site of Works, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.

M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm Width) along with all Fitting/Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. including suitable Size PVC Board with 3.0mm thick Plastic Laminated Sheet Cover for mounting Switches, Sockets, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 16 AMP 3/5 PIN SOCKET OUTLET POINT on INDEPENDENT BOARD, complete all as specified and all as directed.

M&L Sub-main Wiring with 2-Runs of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable and 1-Run of 6.0 Sqmm (nominal area) 1100 Volt PVC insulated Unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn through and including PVC Casing Capping (ISI Marked) of suitable Size (approx 25/32mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run Cables & 1-Run PVC Casing Capping will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire for looping (as ordered/required), etc. will deem to be included in the Quoted Unit Rate.

Refixing Sub-main Wiring with 3-Run of 6.0 Sqmm (Serviceable Wires & PVC Casing Capping/ Conduit obtained from Item No. 2.002 here-in-above) drawn through Existing PVC Casing Capping/ Conduits, Providing New Fittings/Fixtures such as Tee, Bend, Elbow, Socket, Saddles, etc. (White/ Ivory/ Off White in Colour) as required/ ordered at Site of Work and Making Good Disturbed Surfaces of Walls/ Roofs/ Floors, etc. so as to match with the Existing Finishes, complete all as specified and as directed. NOTE :- (a) Cost of 3-Run Cables (Old Serviceable) & 1-Run New PVC Casing Capping along with New Fittings/ Fixtures will deem to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Casing Capping only. Wire for looping (as ordered/required), etc. will deem to be included in the Quoted Unit Rate.

S&F Switch Piano 6 Amp, Single Pole, 1-way, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Switch Piano 16 Amp, Single Pole, 1-way, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Socket Outlet 16 Amp, 6-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed.

S&F Ceiling Rose Surface type, Bakelite 65x50mm 2 to 3 Terminal suitable for 230 Volt AC, 6 Amp and Connecting up, complete all as specified and as directed.

S&F LED Light Fitting 1x20 Watt, 4 Feet, 220 Volt AC, Intregated, Decorative Box type with LED Light, Driver, Holder, Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size including Taking down/out Unserviceable Light Fitting, complete all as specified and as directed.

S&F Exhaust Fan 300mm Sweep, Steel body, AC Single Phase. 230 Volt with Blades, Frame and Louvers, Providing Connection with and including 3 Core Flexible Copper Conductor Cable of suitable Size and Length, complete all as specified and as directed.

M&L Cutting Openings through Brick Walls for Fixing of Exhaust Fan 300mm Sweep with Frame and Louvers and other Openings or Enlarging existing Openings, Making Good Disturbed Surfaces of Walls/ Ceillings, etc. with Cement Mortar 1:3 and Providing Surface Treatment (White/Colour Washing/ Distempering/ Painting) wherever required to match the existing Finishes at Site of Works and Removing Unserviceable Bricks, Rubbish Debris, etc. to a Distance exc. 50.00 Metre but not exc. 100.00 Metre, complete all as specified and as directed.

S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F MCB 32 Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.

S&F MCB 40 Amp to 100 Amp, Triple Pole & Neutral, 'C' Series, 50 Hz, 10 kA, 415 Volt and Connecting up, complete all as specified and as directed.

S&F Factory made Distribution Board Sheet Metal Enclosure SPN 8-way, Double Doors, Front Openable, IP-43 Protected with 200 Amp rated Bus-bar for mounting Isolators & MCB's 240 Volt, fixed Flush with Wall inside the Nitches or Outside on Wall Surface and Connecting up, complete all as specified and as directed.

S&F Factory made Distribution Board Sheet Metal Enclosure TPN 4-way, Double Doors, Front Openable, IP-43 Protected with 200 Amp rated Bus-bar for mounting Isolators & MCB's 415 Volt, fixed Flush with Wall inside the Nitches or Outside on Wall Surface and Connecting up, complete all as specified and as directed.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Wire 4.0mm dia by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 15mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 450x450x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including Taking down/out Unservice-able Earthing of any description, complete all as per specified and as directed.

S&F Earth Continuity Conductor or Main Earthing Lead fixed to Wall on Batten or Recess or Chases or buried in Ground or drawn in Conduit/ Pipe or fixed to Poles or any other indicated Situation for Loop Earthing, etc. as required 4.0mm dia GI or Steel Wire including Taking down/out Unserviceable Earthing Wire of any description, complete all as per specified and as directed.

DEDUCT/ LESS AGAINST SCHEDULE OF CREDIT

Bidders are required to Quote the EQUAL AMOUNT (as per SCHEDULE OF CREDIT at SERIAL PAGE No. 28 of Tender documents) under Column 5 i.e. 'UNIT RATE' (M) against Row No. 160.

M/S AK SINGH

M/S PRASANTA MAHANTA

4S ASSOCIATES

M/S PAUL CONSTRUCTION