CA NO. GE AF NO.1/GUR-76/2023-24 SPECIAL REPAIR TO CERTAIN CIVILIAN BLOCKS , IMPROVEMENT TO CERTAIN BUILDING AND PROVN OF LIGHTENING CONDUCTOR AT AF STATION PALAM UNDER GE (AF) GURGAON NO.1

Amount

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)

M&L for 15mm thick rendering in patches in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without extra cement all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rendering in patches on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth without using extra complete all as specified and directed by Engineer-in-charge

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using Aluminium Channel, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed by Engineer-in-charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary (scoffolding 4th storey).

M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, by auto Roller of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work including necessary (scoffolding 4th storey).

M&L for preparation of newly plastered ceiling surface and applying two coats of white wash over a coat of primer complete and all as specified and directed by Engr-in-Charge.

M&L for complete removal of old plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including necessary (scoffolding 4th storey).

M&L for complete removal of old plastered surfaces of wall and applying two coats or more distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, by auto Roller of required shade and colour complete, as per manufacturer's specification including necessary (scoffolding 4th storey).

M&L for complete removal of Old plastered surfaces of ceiling and applying two coats of white wash over a coat of primer complete and all as specified and directed by Engr-in-Charge.

M & L for PCC 1:2:4 Type B1 (using 20mm Graded stone aggregate) as in for fixing posts, bed plates, anchor blocks, corbels, brackets, including necessary form work etc. complete all as specified and as directed.

Dismantling mild steel work of any description not otherwise provided completed all as specified and as directed

S&F for MS framed work such as grills, grating, etc, with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars; barred iron door; ladders; framed baluster; walk ways; railing; framed work of water tank, for portions framed and hung as gates, including pintle hinges, stops hand made sliding bolts, etc and similar work conforming to Fe-290, Gde-E-165 all as specified and directed by Engr in charge.

Dismantling of plain or corrugated steel sheeting / AC sheeting any gauge thickness inculing nanital or similar pattern roor coverings all as specified and directed

M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats synthetic enamel paint over a coat of red oxide/zinc chrome primer including preparation of new steel/iron surfaces exc 10cm in width or girth complete all as specified and as directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets complete all as specified and as directed .

M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, as in kitchen, cupboard shutter and selves etc fixed with screws to timber frame work including necessary handle,hasp staple, catcher & knobs etc complete all as specified and directed by Engr-in-Charge.

S & F 30 mm wide Continuous (piano) hinges,brass, bright finish or electrogalvanised complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mena radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, roof levelling course, bed block for flooring, rungs, window cills etc complete all as specified and directed by Engr-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing of rubbish off the MOD Land completed all as specified and as directed.

M&L providing 50 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in sub base of floor etc including rough top surface to receive floors finish complete all as specified and as directed.

M & L for non-skid ceremic colour tile size of 7 to 8 mm thick (square/rectungular) area exc. 0.06 Sqm but not exc 0.11 Sqm laid in floors setting and jointed with neat cememy slurry over and including 15 mm thick screed bed in cement mortar 1:6, and pointed with coloured cement to mathc with surfaces of tiles, complete all as specified and directed by Engr-in-charge

M&L non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exceedng 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured digital tiles in vertical surface 450 x 350 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in cement mortar 1:4 Laid and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified

M&L for 75 thick Cement Concrete type D2 1:4:8 (40 mm graded stone aggregate) as in sub base finished even smooth with broom finished w/o using extra cement complete all as directed by Engr-in-Charge.

M&L for pre painted Chequered Cement Concrete tiles size 30cmx30Cmx25mm thick Set and Jointed in neat cement slurry with Grey Cement and Pigment over and including 15mm thick Screed Bed in CM (1:6) as in Path, complete all as specified and as directed.

S&F for 20mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant anf brass threaded fittings for fixing taps etc including Taking down unserviceable 15mm Steel Water Tubing with Fittings and Connections, including wtar tighteness test etc., complete all as specified and as directed.

S&F for 25mm dia CPVC SDR 11 pipe fixed to concealed/wall, ceilling, laid in floor etc incl all fittings with solvant and brass threaded fittings for fixing taps etc including Taking down unserviceable Steel Water Tubing with Fittings and Connections, etc., including water tightness test complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other situation including Taking up down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm bore (dia), ‘Medium Grade’ with all Fittings, fixed to concealed or on Walls, Ceiling or laid in Floors or any other situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F in repair 15 mm bore (dia) Stop valves, fancy type chromium plated ,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for union fixed, complete all as specified.

S&F in repair 15 mm bore (dia) Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified

S&F in repair 15 mm bore Bib taps two way in one Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F in repair faucit CP Brass hand jet Shower 15mm bore dia and 1500mm long CP pipe complete all as specified and directed by Engr-in-Charge (Make- Prayag/ Sikko/ Parko)

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 15 mm bore (dia) Pillar taps, fancy type cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed.

S&F Brass Chromium plated Tublar trowel rail 20 mm dia D type 60cm long, between flange as approved, fixed including Taking down unservice-able towel rail of any description, complete as all specified and directed.

S&F Soap dish, vitreous China white, approximate any description, size 160x 160x90mm complete as all specified and directed.

S&F in repair Vitreous Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (Excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, White, Closed Pattern with Recessed Bottom and Cover including SS Steel Chromium Plated Hanging Device, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick plain cement Concrete of 1:4:8 bedding including taking out unserviceable WC Pan and connected Items, complete all as specified and as directed.

S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting,UPVC Bottle trap, UPVC’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed.

S&F for high pressure PVC connection pipe 15mm dia with Brass CP Check nut and rubber washer complete with 600 mm length complete all as specified and as directed by Engr-in-Charge.

S&F Fancy type Glass shelf of size 600 x 120mm x 5.5mm thick glass with CP railling complete all as specified.

Dismantling of old existing CI/concrete pipes of any description, jointed in cement mortar up to 100 mm dia complete all as specified and directed.

S&F 75mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls complete all as specified and directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints fixed to walls with oval access door complete all as specified and directed.

S&F PVC (SWR) Pipes 75mm in Bore (dia), Single Socketed, in any length with Rubber Ring Joints fixed to Walls or Laid in Floors, etc, including Taking down /up unserviceable Pipe, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) Tee with access door suitable for PVC (SWR) Pipes 75mm in Bore (dia), jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) Bend suitable for PVC (SWR) Pipes 75mm in Bore (dia) with access door, jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

S&F in repair 75mm dia CI bends with oval access door, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 100mm dia CI bends, diminishing pieces or tapers complete all as specified and as directed.

S&F in repair 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

S&F in repair 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type) or with paralled branches with ovel access door complete all as specified and as directed.

M&L for repair of 75mm outlet CI floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge

S&F stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe complete all as specified and as directed.

S&F for Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. 20mm dia with bracket fixed complete all as specified and directed.

S&F in repair 500 ltrs rotational moulded polyethylene three layered water with EPI coated storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings in position including taking down existing water tank of 250 to 500 ltrs or removing of existing RCC old tank complete all as specified and directed by Engr-in-charge .

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore complete all as specified and directed by Engineer in charge.

S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.

S&F Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.

S&F Sheet Glass,4.0mm thick Ordinary, Glazing as in Window Frames fixed with Wooden oil putty/rubber beads, not exc. 0.50 Sqm in Each Pane and fixed in repairs, complete all as specified and as directed.

S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixing and repair etc, complete all as specified and as directed.

Taking down door frame (without taking off shutters from the frame) of area n exc 1.50 sqm each all as specified and directed.

Taking down door frame (without taking off shutters from frame) of area exc 1.50 but n exc 4.0 Sqm each all as specified and directed.

Taking down shutters of size exc 1.00 Sqm but not exceeding 2.00 Sqm and removing to store complete all as specified and as directed.

M&L for 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete, fixed to chowkats all as specified and directed by Engineer-in-Charge.

M&L Second class hard wood plain solid straight chowkat &frame wrought rebated on solid rounded, complete all as specified and directed.

M&L for 2nd class Factory made hard wood, 35mm thick glazed and skelten shutters open repated and prepared to receive framing plain chamfered or rounded fitted with cut and mitered heads for securing glass etc size of member of shutter with all fitting and accessoriese as specified and directed by Engineer-in-Charge.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members complete all as specified and as directed

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S&F 150mm long Aluminium anodised handles, cast type complete all as specified and as directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete complete all as specified and as directed.

S&F Mild Steel Butt Hinges 100mm, Medium Weight, Cold Rolled ISI Marked and fixed, complete all as specified and as directed.

S&F in repairs 200 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (Bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F aluminium colour powder coated (shade or tint as directed by GE) window frame of three track using Jindal or equivalent section No 20832 (92x31.75x1.50mm) fixed with thrust bolt in walls by drilling and sliding shutter of section No 20844 (40x18x1.29mm) or equivalent section for glass including 4.00mm thick tinted glass fixed with rubber beading and bushes complete in two track and third track with one shutterof wiremesh 0.36 mm dia and 1.40mm aperture stainless steel wire mesh fixed with screw and aluminium beading complete all as specified and as directed.

S&F Aluminium colour powder coated (shade or tint as directed by GE) window/ventilator frame of using Jindal or equivalent section No 20032 (61.85x31.75x1.50mm) fixed with thrust bolt in walls by drilling for half bottom and top half with top hung shutter using suitable section with 4mm thick tinted glass and along with aluminiyum complete all as specified and as directed.

S&F aluminium anodized duco grill DG 208 design as per approved pattern including aluminium U Channel etc complete all as specified and directed by Engr-in-Charge

S&F plate rack stainless steel made out of sheet not less than 1 mm thick, size 30 inchX 36 incheX 10 inch with bracket all necessary fittings all as specified and directed by Engr-in-Charge.

M&L for preparation and old decorated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces of wood or wood based materials over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

Demolition of Cement Concrete reinforcement roof, flours (Other than ground floors), beams , staircase, landing, chajjas and similar suspended work.

M&L for RCC (Nominal mix) type B1, 1:2:4 (20 mm graded aggregated) as in slab supported walls, beams and columns in floors, roof landing, balconies, conopies, deck slab and selves and the like.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF complete all as specified and directed by Engr-in-charge. Note:- (i) Adequate lap length shall be provided as per IS-456-2000. (ii) Reinforced TMT bars where incorporated in work will be paid under the relvent items. (iii) The work shall be carried out upto four storied building with scaffolding and in patches as directed by Engr-in-charg e. (iv) Rate for scaffolding and formwork wherever required and as directed to be included in quoted rate. (v) The works will be executed in different buildings and at scattered locations.

Removal of debris/malwa to a distance exc 10Km but n exc 15 Km and depositing out side the MD land and as directed by Engr-in-charge.

M&L for gunniting RCC works in column, beams, slabs, ceiling,Chajjas,Facia, landing, balconies etc by remiving loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 75 mm x 75 mm with 3 mm dia steel wire as facias/drops and similar works etc and applying an epoxy resin concrete bonding agent treatment over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacurers instruction) to bond old and new concrete, gunniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total avg thickness shall be 40 mm thich with cement mortor (1:2) using ordinay port land cement of 53 grade mixing with waterproofing admixture polycrete @ 2% by weight of cement complete all as specified and directed by Engr-in-Charge. Note :The following items shall be deemed to be included in quoted rate

(1) Reinforcement bars placed as per required (2) After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for plastering. (3) Work is to carried out in patches (4) Rate for scaffolding etc shall be deemed to be included in quoted rate (5) Gunniting work at Ground floor to 4 th story height (6) Anti-corrosive protective coating for reinforced bars. (7) 15 mm plaster in CM 1:4 shall be done on Gunniting area (8) All demolished material removed from MOD land completely.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mena radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

S&F 5mm thick plain colour PVC wall lining consisting of PVC sheet inclusive of Solvant Cement and fixing at site on PVC frame or existing surface of any description including making good disturbed surfaces complete all as specified and directed. Make :- Rajshree/Sintex or equivalent (Note :- Rate included for taking out and re fixing of existing electric wire with all necessury fittings, four storey building including scaffolding and all safety measures)

S&F 35x5mm plain colour PVC fillet PVC sheet fixed for wall panelling complete all as specified and directed.

Providing & fixing false ceiling With fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles at all heights with GRG ( Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture,design and patters having moisture content lessthan 2%. Humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987,Noncombustible as per BS 476 (part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15x32mm of length 3000mm,cross-T of size 15x32 of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to from grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvenizing @ 80 grams per sqm)i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lenght and L shape level adjuster of size 85x25x2mm Galvenised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge

M&L for applying two coat of exterior Acrylic emulsion paint (100% acrylic) of approved colour and shade over a coat of primer and over 1 to 2 mm thick birla putty punning including preparation of new and old plastered surface complete all as specified and as directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether coat long life) including necessary scaffolding upto 4th floor.

M&L for preparing new plastered surfaces plastered on walls including cornices plasters and applying two coat of oil bound distemper in patches over a coat of primer complete and over 1 to 2 mm thick birla putty punning complete all as specified.

S&F aluminium colour powder coated door Frame and shutter single or double leaf glazed/pre laminated particle board interior panels fabricated including aluminium powder coated beading rubber Gasket and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Door Shutter Vertical Style of Size 85x44.45x2 mm as per spd. (c) Door Shutter Top style section 95.25x44.45x2.00 mm as per spd. (d) Aluminium coloured powder coated middle lock rail/bottom rail section 150x44.45x1.93mm cat No.20002. (e) Aluminium coloured powder coated Tower Bolt 02 Nos in each shutter 200 mm long as spd. (f) Aluminium coloured powder coated handle 02 Nos in each shutter 150 mm long as per spd. (g) Door Floor spring ISI Marked Make-Sandhu, Amar or equivalent. (h) Six lever mortice lock brass on in each door. (j) 12 mm thick partical board (pre laminated both face) exterior grade ISI Marked (k) Tinted glass with solar control film /Plain glass(Colour) 5mm thick.

S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:- (a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per spd. (e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd. (f) Tinted /coloured glass 5 mm thick with solar control film fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with "H" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.

S&F 75 mm butt hinges made up of extruded anodised aluminumfixed with flat head SS screw complete all as specified and directed.

S&F 125mm long extruded anodised aluminum alloy handle fabricated type fixed with flatb head SS screw complete all as specified and directed.

S&F for 150mm long anodised aluminum barrel tower bolt of extruded aluminium section fixed with flat head ss screw complete all as specified and directed.

S&F for aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section complete all as specified and directed.

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.

S&F 4.0mm thick sheet glass plain pane best quality fixing to Aluminium/Steel/wooden Sections as in Panel of Doors/Windows/Ventilator and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.

S&F 4.0mm thick Glass pane figured pin headed type, best quality, fixing to Aluminium/Steel Sections as in Panel of Doors/ Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc. or fixed with Oil Putty, as required/ordered at Site(s), complete and fixed all as specified and as directed.

M&L for preparation of plastered or un plastered old decorated surfaces of walls and ceilings by Vacuum based sanding machine all as specified and filling cracks/hole by applying wall care putty (multi purpose mixer will be used for uniform and proper mixing of putty) and applying two coat distemper oil emulsion white or coloured by auto roller complete incl removal of nails etc and grinding where necessary all as specified & directed by Engineer-in-Charge. (Note :- Work will be strictly executed by mechanised means/tools as required for smart periodical services)

M&L for preparation of old decorated plastered wall surfaces complete all as specified, removal of nails etc & filling cracks/hole with putty and apply one coat of exterior emulsion paint 100% acrylic of approved make, white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

S&F Vitreous China 600mm Size Oval Shaped Wash Hand Basin White with Granite Counter Top supported with 40mm thick Cudappah/Red Stone horizontal and vertical Stone of Suitable Size including vertical granite Strip with Moulding/Rounding on exposed edges, with 32mm dia Brass Chromium Plated Waste Fitting, UPVC Bottle trap, 32mm dia UPVC Waste Pipe, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable old Wash Hand Basin of any description and connected Items, complete all as specified and as directed.

S&F Fancy type two way CP brass bib tap 15mm Bore,Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. make:- Cat No PSP-512 of Prima/ARG-207 of Coronet or equivalent of Marc/Jaguar/Cera.

S & F in repair vitrous china half stall urinals white or colour with Brass CP Spreader and water connection as directed complete including fixing all accesary and screw etc. pointing around urinal and PVC waste pipe suittable for urinal pot complete all as specified and as directed. Make :- Cera, Parrywere, Hindware, Jaguar, Johnson

S&F in repair Angle Stop Cock 15mm Bore (dia), Brass Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and as directed. Make :- Cat No PSP-504 of Prima/ARG-404 of Coronet or Equivalent of Cera/Johnson/Jaguar/Marc.

S&F Liquid Soap Dispensor with holder, fix in wall with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish/Dispensor of any description, complete as all specified and directed. Make :- Cera, Johnson, jaguar, Marc.

S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved, including Taking down un serviceable Health Faucet of any description, complete as all specified and directed. Make :- Cat No PHF-4307 of Prima/ALD-CHR-563 of Jaguar or equivalent of Cera/Johnson/Marc.

S&F, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes.

S&F for Brass Hat Peg Set of Six, Solid body, 75 mm to 100 mm complete all as specified and as direceted.

Demolition/Breaking up Drain Pipes (SGSW), AC/RCC 150 mm to 200 mm dia, Jointed in Cement Mortar of any description including demolition of PCC bed/haunching of the Pipes, complete all as specified and asa directed by the Engineer-in-Charge.

M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for reinforced cement concrete pipe 200 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 200 mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

S&F in repairs, Precast Cement concrete perforated drain cover of size 750mm x 600mm x 70mm thick surrounded with steel strip 70x2mm Reinforced as per manufacturer's design in Manufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.Or equivalent as approved by GE. (ii) Contractor shall provide PV along with manufacturer test certificate of SFRC cover.

E/M Portion

Taking down copper/aluminium point wiring (light points) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors as per existing surface etc. complete all as directed

Taking down copper/aluminium submain wiring complete, including conduits of any kind, and removing materials to store for keeping in safe custody or for taking credit (credit for the above items should be made as per conditions seperately) and making good disturbed surfaces of walls. floors as per existing surface etc. complete all as specified and directed .

Taking down main switches, distribution boards etc of any type and capacity along with the existing boards, and removing the same from site and making good the disturbed surfaces of walls. floors as per existing surface etc. complete all as specified and directed .

M & L for point wiring (concealed on wall & surface/concealed on cealing) for one light/fan/exhaust fan controlled by one modular switch one way in different locations/building including rigid non metallic PVC conduit, medium grade, ISI marked , 20 mm dia, with 1.5 sqmm FRLS PVC insulated & unsheathed, stranded copper conductor of 1.5 sqmm as continuous earth connected to common earth dolly, complete all as specified and directed by Engr-in-charge.

All as per item No 133 above but for 5 Amps 5 Pin socket outlet on the same board -ditto-.

All as per item No 133 above but one 5 pin, 5 Amp socket outlet on independent board not below the switch board of the light point in the same vertical plane -ditto-.

All as per item No 133 above but One bell/buzzer point controlled by on bell push -ditto-.

All as per item No 133 above but One light point controlled by two 2- way switches with cables 1.5 sqmm size copper wire ditto-.

All as per item No 133 above but one 5 pin, 15 Amp socket outlet on independent board for power point with 2.5 sqmm size copper wire -ditto-.

S& F ceiling rose, 2 to 3 terminals complete all as specified and as directed .

S&F Modular switch, one way 6 Amps , 1 module complete all as specified and as directed .

S&F Modular Socket , 6 A-2/3 Pin combined 2 module complete all as specified and as directed .

S&F in replacement of switch modular one module 2 way 6Amps complete all as specified and directed.

S&F twin socket modular type heavyduty out let 6 pin 6/16 Amps 2 module, complete all as specified and as directed .

S&F switch Modular type 16 Amps , single pole one way 240 volts one module complete all as specified and as directed .

S&F Modular Fan step Regulator Bell ,120 W-2 module complete all as specified and as directed .

M&L for metal flush box for fixing of switches for 1/2 module complete all as specified and as directed .

M&L for metal flush box for fixing of switches for 3 module complete all as specified and as directed .

M&L for metal flush box for fixing of switches for 6/8 module complete all as specified and as directed .

Supply & fix Modular White cover plate with frame for 1/2 module complete all as specified and as directed .

Supply & fix Modular White cover plate with frame for 3 module complete all as specified and as directed .

Supply & fix Modular White cover plate with frame for 6/ 8 module complete all as specified and as directed .

S&F Modular type blank plate , 1 module as specified.

S&F in replacement of lamp holder with decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base complete all as specified and directed by Engineer-in-Charge. Make:- Surya/ Bajaj/ PHILIPS/ HAVELLS

S&F 9 watt LED bulb suitable for decorative wall light fixture complete all as specified and as directed .

Taking down of serviceable ceiling fans and refixing the same on same position including cleaning and painting after the work is over complete all as specified and as directed .

Taking down of serviceable Exhaust fans and refixing the same on same position including cleaning and painting after the work is over complete all as specified and as directed .

Supply and fix PVC ventilating fan AC single phase 230/240 volts of size 200 mm sweep with louvers and connecting up including provision of cable from ceiling rose to connector to exhaust fan also including make suitable size hole on wall/window as per site requirement complete all as specified and as directed .

Supply and fix in replacement of factory made epoxy polyster powder coated distribution board double door SP&N 8 way 240V fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings complete all as specified and confirming to IS: 8623 . Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.

S&F vertical type TPN 415 Volts Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates 8 way double door type DB suitable for upto 160 amps rating MCCB as incomer complete all as specified and directed.

S & F MCB SP of rating, 06 to 32 Amp,240 volt, 10 KA 'B' Series type complete all as specified and as directed.

S & F MCB SPN of rating 40 to 63 Amp, 240 Volt, 10 KA, 'C' series type complete all as specified and as directed.

S&F in MCCB 3 Pole 415 V. fixed type, 125 Amps with breaking capacity 16 KA complete all as specified and as directed .

S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ AC plug points complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit and making disturbed surface good to wall/floors as existing surface.

M&L for concealed sub main wiring three run of 06 sqmm PVC insulated unsheathed copper conductor cable ISI marked 1100 volts grade drawn in and including PVC surface conduit suitable size of medium grade fixed on wall/ceiling/passing through wall etc connected as required at site complete all as directed. (For main DB to sub DB connection ) Note- (a) Two runs of single core cable with one run of earth continuity cable including PVC conduit and its accessories will be measured and paid as one unit). (b) Make disturbed surface good to wall/floors as existing surface.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing complete all as specified and directed.

S&F in replacement of 4 feet, 18 to 20 watt Decorative ultra slim aluminium LED lighting fixture with atleast 2000 lumen output, environmental friendly, energy complete all as specified and by Engr-in-charge.

S&F in replacement of 2 feet 09/10 W slim LED battern (cool day light) with atleast 1000 lumen out surface and wall mounted with polycarbonate housing & integrated with electronic driver complete all as specified and as directed .

Supply and fixing LED building light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S & F air termination , single pointed copper rod ,12 mm dia and 300 mm long complete all as specified and directed.

M& L for test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25 mm drilled & screwed including 3 hole,8mm dia 25mm long hexagonal head with nuts & washers complete as specified and directed.

Supply and fixing of copper Strip of size 20 X 3 .15mm buried/laid in trenches/fixed on wall/tower etc complete as specified and as directed by Engr in charge.

M & L for GI pipe light grade 40 mm dia for protection of lightening conductor laid in ceiling/roof or fixed to wall complete all as specified.

M & L for PCC 1:3:6 type C2 using 40 mm grade stone agg as in PCC block foundation complte all as specified and directed.

M & L for earthing with copper plate earth electrode 60cmx60cmx3.15 mm thick buried directly in ground (earth pit not less than 3.00 mtr below ground level with top edge of plate not less than 2.25m. below ground level) brazed with copper strip 20x3 mm size 7.0 mtr long and connected to copper strip of any size by means of copper bolts, nuts, check nuts and washers complete all as specified and directed.

Note:- The rated quoted is deemed to the inclusive of the followings:- (a) The excavation and earth work (filling in, ramming in layers, watering etc as directed) in any type of soil for earth pit (pit size 1.20x 1.20x3.0mtr). (b) Perforated GI tubing (ISI marked) light grade 50mm bore 7.0 mtr long for strip protection and watering. (c) Common salt charcoal dust in alternative layers of 15cm, up to 60cm above the top of copper plate all as directed (Salt - 300Kg, Charcoal dust - 500 Kg). (d) Earth chamber of internal size 600mmx600mmx600mm, built in PCC (1:3:6) type C2 bed 15cm thick at bottom, brick work in CM 1:6 upto 45cm over PCC bed and PCC (1:3:6) type C1 coping 15cm above, embedded with MS angle 50mmx50mmx3mm frame work duly painted with anti corrosive bituminous paint, with and including RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with XPM (weight not less than 4Kg per Sqm) having lifting arrangement duly painted in green and making earth pit as directed. (e) On testing, after completion, if the earth resistance < 2 Ohms is not obtained, earthing will be regenerated at no extra cost till the desired earth resistance is obtained. (f) GI tubing, bib tap etc for provisioning of continuous water supply at earthing pit will be measured and paid seperately under respective schedule of the contract.

Material & Labour for copper brazing with copper strip of size (32X6 or 20X3.15mm) complete all as directed by Engr in charge.

S & F porcelin insulator 15 DMC size 'T' type with nut bolts screws for fixing of copper/aluminum/GI strip on wall/PCC blocks all as specified and directed.

Taking down of existing old unserviceable MCB of any rating complete all as specified and as directed.

Taking down of LED tubelight/Ceill ing light/Round light/Bulkhed light of any type and capacity complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Removing and refixing LED tube lights fitting of any capacity, 220V, AC decorative box type after cleaning with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Removing and hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan after cleaning complete all as specified and as directed.

S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 20mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 1.5 Sqmm single core HR Grade and one run of 1.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main points complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

Supply , Laying , testing and commissioning in replacement of XLPE insulated and PVC Sheathed , galvanized steel strip or wire armoured , heavy duty electric cable with multi stranded aluminium conductor , 1100 volts grade of size 16 sqmm 3 core complete all as specified & directed by Engineer - In - Charge.

Excavation in treanches in soft loose /soil not exc 1.5m wide and not exc 1.5m deep and getting out for taking out and laying cables foudation etc. complete all as specified and as directed. (Note:- Brick PCC cables protection cover shall be retrieved and kept in safe costody for reuse).

Returning, filling in including spreading leveling waterning and well remmaning in layers not exc 25cm thick complete all as specified & directed by Engineer - In - Charge.

Removing of surplus spoil to a distnce not exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed by Engineer - In - Charge.

M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed. Note :- Thickness of sand cushioning shall be measured after punning.

M&L for brick protection with sub class 'B' Designation 75 old bricks laid dry flat 23cm in width over sand cushioning in trenches as perpendicular to the direction of underground cable complete all as specified and as directed.

Ditto- as per Srl item No. 158 but 4 way double door with 200 amps rated bus bar 240V complete all as specifed and as directed.

S&F Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps,complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Note:- The amount of Rs 77051/- against Schedule of Credit on Page No 159 & 160 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

GIR RAJ BUILDERS

JAIPAL AND BROTHERS

M/S Parshant Associates