Tiruppur Corporation_Providing aluminium partition and false ceiling arrangements for the Child Care centre at Muthamizha Arignar Kalaignar M.Karunanidhi Central Bus Stand and Providing Electrical arrangement at Tank office room and CHO office Room

Supplying and fixing in position of Aluminium anodised partition with 62x38x2mm extruded box section at bottom, vertical and horizontal members. The vertical members are spaced at 90cm c/c and to horizontal members are spaced at 1.20m, 2.10m and 2.40m height and the bottom panels should be covered with 12mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick clear glass with necessary glassing clips, rubber beadings etc., including cost of labour for electrical consumption required for the fabrication, drilling holes in RCC columns with power drill to the required extent and make good to the original condition etc., complete and as directed by the departmental officers. The aluminium for frame to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc., conforming to IS specification including primer coating and enamel painting as per design given by the departmental officers etc., complete as per standard specification.

Supplying and fixing in position of false ceiling arrangements with aluminium anodised 'T' section and 'L' angle frame work of grid of size 60x60cm with aluminium 'T' section and 'L' angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dis MS rod with suitable threaded nuts suspended rods hung from ceiling at 100cm c/c in both directions and fixing 60x60x20cm thick thermocol in the grid as to give a seat to false ceiling including painting the 6mm dia MS rod etc., complete complying with standard specifications. Necessary openings and arrangements for fixing electrical fittings should be provided with suitable frame work etc., complete.

Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications.

Wiring with 2x1.5 sq.mm .PVC insulated unsheathed FRLSSC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch inflush with wal lcovered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point(forelectronicregulator)(5points per coil)

Wiring with 2x1.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switchbox for 5A 3pin noninterlocking Wall socket with 5A flush types switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point

Supply and Fixing of 4’ 18W Crystal Glass LED Tube Light Fitting

Supply and fixing of 1200mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 1meter downrod on the existing clamp

Repairing of Elevation glass etc complete including all metrials cost and inveniyance etc complete

Providing of Painting Work and Name board Art Painting in wall including Primer two coats, water Proof Multicolour paint, brush, Scaffolding and labour Charges etc., completed.,

Add G.S.T. @ 18%