Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.7 LAccepted-Finance | 1 | Accepted-Finance Being the lowest tenderer and fulfilling all the criteria | |
| 2 | 2₹17.8 L+₹4,919 (0.28%)Rejected-Finance ROAD NO 04 JANARDHAN NAGAR LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | 2 | Rejected-Finance Not being the lowest tenderer | |
| 3 | 3₹21.1 L+₹3.4 L (19.2%)Rejected-Finance 131 SANGAM NAGAR OPP NATIONAL SCHOOL SANGHVI PUNE 411027 | PUNE | MAHARASHTRA | 411027 | 3 | Rejected-Finance Not being the lowest tenderer | |
| 4 | 4₹24.7 L+₹7.0 L (39.4%)Rejected-Finance BLOCK NO 2 FLAT NO 17 FIRST FLOOR KENDRIYA VIHAR PARUTHIPATTU AVADI CHENNAI 600 071 | CHENNAI | CHENNAI | TAMIL NADU | 600071 | 4 | Rejected-Finance Not being the lowest tenderer |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CHENNAI
FORT SAINT GEORGE CHENNAI
REPAIRS TO WOODEN STEEL BEDS AND CHARPOYS UNDER GE CHENNAI
2022_MES_555704_1
8613/E8
Open Tender
Civil Works - Others
Item Rate
183 days
FORT SAINT GEORGE CHENNAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE CHENNAI
₹50,000
Yes
15 Nov 2022
3 Oct 2022
7 Nov 2022
3 Oct 2022
31 Oct 2022
17 Oct 2022
Amount
BOQ UPLOADED ON 03 OCT 2022
BED PLYWOOD TOP / BED HARD DOUBLE (FD-246 & 247 / TP): Removing the following existing unserviceable parts from BED PLYWOOD TOP / BED HARD DOUBLE and Supply & Fix new components as shown on drg and all as specified and as directed.
4mm thick one side teak face plywood (Natural teak) to both side of head board size 780mmx340mm including 6mm thick teak wood beading provided alround the head board and all as specified in drg and directed
4mm thick one side teak face plywood (Natural teak) to both side of foot board size 780mmx180mm including 6mm thick teak wood beading provided alround the head board and all as specified in drg and directed.
Long rail of size 35x90x1980mm of 1st class teak wood and made to shape and all as specified in drg and directed.
Short rail of size 35x90x900mm of 1st class teak wood and made to shape and all as specified in drg and directed.
Centre supporting stiffner 40X60X900mm of 1st class teak wood made to shape and all as specified in drg and directed.
12mm thick ply wood top BWR grade conforming to IS:303 of size 1950 x 900mm of approved make and fixing by SS screws and all as specified in drg and directed.
M&L for preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of FRENCH POLISH to give a GLOSSY FINISH appearance all as directed.
BED HARD STEEL (FD/E6/MAP/08) / (FD/E6/MAP/08( R) ): Removing the following existing unserviceable parts from BED HARD STEEL and Supply & Fix new components as shown on drg and all as specified and as directed.
MS Rectangular LONG RAIL of size 25mm X 65mm x 2050mm,18 Gauge of standard IS Approved make, powder coated properly, welding / tightening with suitable nut & bolt completely as per the drawing all as specified & as directed.
MS Rectangular SHORT RAIL of size 25mm X 65mm x 900mm, 18 Gauge of standard IS, Approved make, powder coated properly, welding / tightening with suitable nut & bolt completely as per the drawing all as specified & as directed.
MS Square STIFFNERS of size 25mm X 25mm / 18mm X 38mm / 38mm X 38mm of 18 Gauge of 900mm long. M & L for Welding Stiffner, MS Cleats, legs and any parts of steel portion wherever required of Bed Hard Steel and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality and provide 4 numbers of hard rubber shoes for legs and all as specified and as directed. Note : All welding parts of a single Bed is considered as 01 unit.
12mm thick ply wood top BWR grade confirming to IS:303 of size 2000 x 850mm of approved make and fixing by SS screws and all as specified in drg and directed.
18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x185mm, screwed to MS strip, arc welded to 18mm size rectangular pipe as in head board of Bed hard with plytop including taking out old unserviceable head board complete all as specified and directed.
18mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination of size 630x310mm,, screwed to MS strip, arc welded to 18mm size rectangular pipe as in foot board of bed hard including taking out old unserviceable foot board complete all as specified and directed.
CHARPOY IP WITH HARD TOP / CHARPOY OR STEEL (FD/MAP-II/01) / (FD/MAP/HD/07) / FD - 77 : Removing the following existing unserviceable parts from CHARPOY IP WITH HARD TOP / CHARPOY OR STEEL and Supply & Fix new components as shown on drg and all as specified and as directed.
MS Rectangular / Tubular LONG RAIL of size 25mm x 65mm x 1980mm,16 Gauge of standard IS Approved make, powder coated properly, welding / tightening with suitable nut & bolt completely as per the drawing all as specified & as directed.
MS Rectangular / Tubular SHORT RAIL of desired lengthof size 25mm x 65mm x 900mm, 16 Gauge of standard IS Approved make, powder coated properly,welding / tightening with suitable nut & bolt completely as per the drawing all as specified & as directed.
M & L 25x25x1.50mm thick MS square tube, 850mm long, as in stiffner of charpoy IP with hard top, welded to long rail including taking out old unserviceable MS tube complete all as specified and directed.
M & L for Welding to stiffners, MS Cleats, legs and any parts of steel portion wherever required of Charpoy IP with Hard top and smoothening the surfaces with emery paper and applying one coat of synthetic enamel black paint of approved quality, provide 4 numbers of hard rubber shoes for legs and all as specified and as directed. Note : All welding parts of a single charpoy is considered as 01 unit.
M & L 12mm thick ply wood top BWR grade confirming to IS:303 as in charpoy hard top, screwed to stiffner of Charpoy IP with hard top including taking out old unserviceable plywood complete all as specified and directed by Engineer-in-Charge. (Make: Kitply / Century / Everest / Anchor / Greenply)
CHARPOY GI PIPE WITH PLYWOOD TOP FD-220 :
Removing the existing unserviceable plywood top from Charpoy GI Pipe with plywood top S&F 12mm thick plywood commercial grade of size 1980x900mm with rounded edges at four corners duly fixed with 8 nos MS bolts & nuts 6mm dia 75mm long with plate washers as specified and directed by Engineer-in-Charge.
Removing the existing unserviceable stiffner from Charpoy GI Pipe with plywood top S&F flat Iron stiffner 40x6mmx900mm fixed horizontally to short rail at equal distance all as specified and directed by Engineer-in-Charge.(each flat iron stiffners will be measured as single units.)
CHARPOY GI PIPE WITH NYLON NEWAR / CHARPOY FOLDING IP W / NYLON NEWAR / CHARPOY NEWAR (FD - 220 / 1119 / 388 / 227 ) :
Removing the existing unserviceable Newar from the existing CHARPOY GI PIPE WITH NYLON NEWAR / CHARPOY FOLDING IP W / NYLON NEWAR / CHARPOY NEWAR and Re-weaving the same with approved quality NYLON NEWAR 50/55 mm wide white / light colour (weight of nylon newar shall not be less than 2.00kg per charpoy) including tightnening of joints and threading wherever necessary as specified & as directed. Note : Re-weaving of single Charpoy completly is considered as one unit.
RACK SHOE STEEL (FD/E6/MAP/02) : Removing the existing unserviceable parts of RACK SHOE STEEL and S & F of new components all as shown on drg completely as specified & as directed.
S & F of new MS pipe of 18 Gauge for various parts of Shoe Rack steel size 880mm x 300mm /845mm x 300mm, MS pipe used should be of 20mm dia with thickness of 1.6mm of external dimensions completely as shown on drawing all as specified & as directed. Note : Complete exterior frame is considered as single unit.
S & F of jalli shelves consisting of 3mm dia mild steel lateral length 700 mm & transverse members of length 300 mm with 10mm spacing b/n each lateral & transverse members of completely as shown on drawing all as specified & as directed. Note : Each complete Tray / Rack is considered as single unit..
CHAIR VERANDAH PVC SEAT & BACK (FD/MAP/II/06) :
M&L for removing unserviceable / broken PVC seat & back from Chair verandah and fix new PVC seat & back of size 455 mm x 455 mm with 4 mm ribs on back side all as specified and as directed.
CHAIR DINING JCO/OR's (FD/MAP/II/05) :
M&L for removal of old unserviceable broken PVC seat of chair dining JCO /OR and fix new PVC seat size 430 mm x 440/405 mm of make AMCO or equalent in Chair Dining JCO/OR complete all as specified and directed.
Teak wood Rear leg of size 55mm x 30mm x 890mm made to shape including nylon buffers.
Teak wood Front leg of size 55mm x 30mm x 440mm made to shape including nylon buffers.
Teak wood front rail made out of 30mm x 65mm x440mm made to shape with holes at every cm in straight line.
Teak wood Side rail made out of 30mm x 65mm x430mm made to shape with holes at every cm in straight line.
Teak wood Rear rail made out of 30mm x 65mm x405mm made to shape with holes at every cm in straight line.
Teak wood Stiffeners of size 20mm x 25mm x 400mm made to shape.
Teak wood Top back rest 20mm x 50mm x 390mm made to shape.
M&L for fixing MS right angle of size 50x30x5 mm thick on any one corner of Chair Dining JCO/OR by screwing to side rail and leg of Chair all as specified and directed Note : 08 pieces per chair are considered as 01 Unit.
M&L preparing the old surface by scrapping and smoothening with sand paper to an even finish and apply two or more coats of French polish to give a GLOSSY FINISH appearance and fixing of PVC bushes (04 No's per Chair) all as directed.
TRESTLE STORE ROOM IRON (DB - 4101) :
M & L for Welding at required broken areas/ edges / parts of steel portion of TRESTLE STORE ROOM IRON in accordance with the standard workman ship & specification and all as specified and as directed. Note : All welding work in parts of single Trestle is considered as 01 unit only.
M & L for Smoothening the surfaces, Interior & Exterior, with Emery / Sand paper and applying TWO COATS of synthetic enamel OLIVE GREEN or SILVER GRAY paint of approved quality all as specified and as directed
BOOK CASE STEEL ( FILING CABINET W/GLASS SHUTTER 03 SHELVES 04 COMPARTMENTS (FD-1028 / FD-90(M) ) : Removing the following unserviceable parts from BOOK CASE STEEL ( FILING CABINET W/GLASS SHUTTER 03 SHELVES 04 COMPARTMENTS and supply & fix new components duly treated with one coat of red oxide primer complete all as specified and directed :
Removing the dents & bends and welding wherever required to make into original shape and remove old paint from surface with emery paper and apply putty to obtain even surface and applying two coats of Hammertone metal paint of approved colour with spraying machine on both Interior / Exterior portions of BOOK CASE STEEL ( FILING CABINET W/GLASS SHUTTER 03 SHELVES 04 COMPARTMENTS including shelves complete all as specified and directed.
S & F of SHELVES of size 485mm x 920mm made with 1mm thick MS sheet duly painted with hammertone paint of approved matching colour as in the drng all as specified & as directed.
S & F of SHUTTER / DOOR frame of size 540 mm x 810 mm made out of 1mm thick MS sheet along with 3 mm thick plain glass fitted inside the frame with rubber lining/gripper(if required) only as per the drng all as specified & as directed.
Removing un-serviceable LOCKS of BOOK CASE STEEL and S & F of new lock 6 lever with duplicate keys of superior quality all as specified directed.
SARGAM ENTERPRISES
LEO ENTERPRISES
SHANMUGA TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .